02 - 06 toyota camry front brakes
HTML-код
- Опубликовано: 3 апр 2018
- If a MECH A NIC video helped you consider donating to my patreon account to help support the channel. / the_mech_a_nic
or my paypal
paypal.me/jonathanrenteria1986
THE MECH A NIC’s amazon store ,here’s the tools I use
www.amazon.com/shop/themechanic
THE MECH A NIC’s Instagram page
/ the_mech_a_nic
THE MECH A NIC’s facebook page
/ the-mech-a-nic-1356996...
Thank you for watching my video, I appreciate the support !
save yourself some money and learn how to change your front brakes!
If the video helped you and you would like to show your appreciation by donating what you can please visit my patreon . Thank you 
Авто/Мото
"Don't the the caliper bracket fall"...cracked me up. Your right, everyone does a brake video but when your looking for a specific make and model car, these videos are great.
Exactly, try changing your timing belt by watching a video of a different make n model...good luck lol 👍🍻
That was funny
This was well filmed and the audio explanation was very good. When I used to work on my car I’d make a list of all the tools and their sizes, plus any other bits and pieces like greases, oils etc. I needed to do the job. It would be fantastic if you did that and put in in the description for easy reference. Thanks for a great video.
I was gonna install 2 Front Pads on my 03' Camry. Buddy this installation procedure. This guy is thorough. He shows you the entire process with the pitfalls/ Rotors. Calipers are 14 mm on mine. Thx
Love that you kept in the mistakes - they helped with the learning
New Sub here, that comment about searching for the specific model and getting the mustang example is spot on, thanks for the detailed explanation.
Solid video bro... Im doing my 2005 brakes in the Morning... Your vid helped a lot... Ive done brakes... Many times... But not a 2005 toyota... Thanks man
Props.
Thanks for watching. I appreciate the comment 👍good luck
The best brake job for my specific 2003 Camry. Thanks for taking your time to explain all the steps. God bless.
Thank you for watching
Thanks for the video. I'm going to give it a shot
Ur filming angles are amazing thanks that really helped
You're welcome
Thanks for being so thorough! Tired of being the damsel in distress so I started working on my own car at 30 years old, I'm now 42 fixing to do my first break job, I have alternators and starters and anything else under the hood mastered.I hope this will be as simple as you made it look thanks for the video and I agree with you I'm tired of looking up videos and I completely different car video pop up kudos to you subscribe and liked!
A real woman!
Great info and well made video. I will usually watch a few videos on the same subject to get a complete idea of what needs to be done. This single video has all the relevant information with no unnecessary fill. Well done.
Thank you. I appreciate the comment
Excellent video. I'm doing this to my son's 2004 Toyota Camry tomorrow. Thanks!
Keep up the good work, I appreciate this.
I enjoy ALL of these instructional vehicle repair videos.....From Chris to Scotty to Eric......they are all pretty helpful. I especially liked this one, buddy, because I own a 2004 Toyota Camry. Plus, when you use certain tools specific to the job, it gives me a reason the buy that tool (LOL). Thanks!!
Thanks for the comment and watching
Great step by step video. Helped my son and I out greatly. Keep making videos!
Thank you and thanks for watching 👍
I subscribed. I already know how to do brakes but still watched the whole video for some reason!! You do a good job explaining things.
Great! Thank you for the sub and the compliment
Very detailed DIY video. Thanks brotha
By the way you are absolutely correct when people are looking up their exact specific make and model they want to see how it’s done a self-made do it yourself or like me likes all of the information I can get it’s all in the details my friend great job.
Thank you. Glad you found the info you were looking for 💪
this man is the funniest mech out here. keep doing you bruh!
😂thank you, appreciate it 👍
Thanks for the great thorough brake video. It helped!
You're welcome.thanks for watching
I love your video, nice and specific to my vehicle and you are super thorough. Thank you
You're welcome. Thanks for watching
preciate this video lol gonna use this next time i do brake maintenance
You're welcome.thanks for watching
Very good explanation of the job
. Admits MISTAKE and went on to finish. Very useful.
Thanks for watching
To be honest, this vid is one of the most useful that I've seen. Nice job.
Thank you
Ok. This was the best brake pad and rotor change video I've seen.
Thank you. Appreciate you watching
Best video I've seen so far. Yes, when we are looking for a particular make and model(mine being this one) I dont wanna see a 98 mustang 😂 which makes working on your car a whole lot easier
Glad to see someone understands what im saying lol. Thanks for watching
First time viewer. There is a difference between a thorough safe repair and a quick repair. You have been subscribed lol..
🏆🎖Great informative video..
Thanks.
Thank you ! 👍
Great job man. Spot on about the other videos being vague too, lol
Great video!
Nice Vid... I've watched so many before I did my 2002 Camry - My lower slide pin was stuck just like this car's. After looking in the service manual I realized that the two slide pins are totally different. One has a little indent section towards the end and a rubber bushing (part no. 47769-50010) goes there.
That little bushing was MIA on my car and is missing on the slide pin in this video as well 9:31 - I just ordered two of these and will revisit my front brakes when the bushings arrive...
Absolutely outstanding video presentation 👍🏽
Thanks for watching
Good job, thanks for sharing.
Thanks for watching
great job i have a 05 .this will help me .
Nice, good luck 👍
Thank you for such a detailed view - products, torque specs, etc. The only thing I'd add is thoughts on bedding the brakes or a link to a video on that. But great video!
Great Video, Great Work, Many Thanks.
Thank you, thanks for watching 👍
Easiest brake job I've ever done. The part that took the longest was compressing the calipers with a caliper tool
Dude thank you so much, just changed my 04 camry brake pads. Your a bloody champion mate.
You're welcome. Thanks for watching
@@themechanic6117 I have a family of 5 kids between me and my partner and we drive in my car to pick them all up, you literally saved me $250 dollars.... I can not thank you enough. Hope your having a great night man
Glad the video helped you. 👍
Thankyou for this video
Thanks for watching
seriouly, it is a very good video! I would take a ride and re-torque the lugnuts though. 👍
Thanks - great video
Thanks for watching👍
Enjoyed your video very informative
Thank you
Great vids man
Thank you
Thanks finna do mines now
A very helpful and informative video. Thank you !
Thanks for watching
I'm amazed by the condition you get these cars. Seeing many pictures on Instagram, I don't think I've seen any pad material on any of them!
Yeah people wait till the noise is so bad that they can't stand it. It amazes me just as much...
This is a great video bro. You have skills and manners of a certified tech. Thanks for the details and clear explanations...👍🏾
Thank you. I appreciate the comment
great video, thanks for doing my exact model. I am not a fan of blue thread lock because the next time you take it apart it is going to be a pain. but that's me.
Thanks for watching. Ive stopped using thread locker because it is over kill. If its tightened properly itll be just fine
You just saved me a ton of $$$ thank you and keep on doing your stuff brother.
You're welcome. Thanks for watching
@@themechanic6117 hey any tips for taking off a stubborn rotor? I took everything off it but it's on there pretty tight
Does it have the tapped holes in the center to insert screws? If not used heat, a large hammer and penetrating oil. Use can also use a bolt coming from the caliper bracket to press on the rotor but you have to be careful with that to not bend those tabs
@@themechanic6117 yes the bolt method worked perfectly! LoL my second question after I cleaned and put everything back together the bottom fastener bolt on caliper isnt completely stopping. It's on there pretty good but it it doesn't stop when I'm tightening. I noticed in your video the greased bottom bolt doesn't move when you tighten the fastener but mine does..
If the part that the screw goes into is spinning you need a wrench or pliers to hold that part as you turn the bolt
Thanks finally i video that can help a young guy like me do it myself and safe some money from just sending it to a mechanic
Sure thing. Lots of money to be saved 👍thanks for watching
Excellent 👍👍 video
A very good video that explains many of the common brake issues/problems. Just a couple comments.
1. No reason to cheat and just pull one bolt. That is what quicky brake shops do and likely why the bottom slide pin was never serviced and it seized.
2. The bottom slider pin (one that was seized) is supposed to have a rubber o-ring on the end. When it was pulled out....no rubber ring. It is still in the rusty bore of the caliper. I j-hook pick will easily remove it to be reinstalled on the slider.
3. The brake grease is a great idea but does NOTHING between the chrome brake pad hardware and the caliper. Might help it not rust again but the job of the brake lube is to let the PADS slide in the rectangular slots. Just a bit on the pad 'ears' will do the job.
I don't apply any grease to the ears of pads. Sure it works initially but it just collects dirt and grime and makes it even worse. No grease on the ears of the pads is the way to go. Just like when you buyba car brand new , the ears of the pads don't have grease on them. Over the years I've seen that this does work better
Buen video bro ahora a cambiar mis frenos
👍💪
Good ..VERY helpful
Thank you
Nice video brother ! I am an auto mechanic from Canada . You do very good, quality work
Thank you 👍
Great video 👍👍👍
Thank you
Good thanks
I’d be surprised if the brakes were the only thing lacking maintenance on this vehicle. Nice job!
Yeah I hear you , people don't fix or maintain anything until it fails completely..
Great way to do that
Nice work got yourself a new sub👍🏻
Thank you
YOU EARNED A SUB SIR !!!
EXCELLENT VIDEO ‼️‼️
Thanks 👍🏻👍🏻
Thanks for watching
Brother, thank you much! Your lesson is very helpful. There is the only thing that I wish you could emphasize more and that is cleaning of the caliper and bracket from rust very thoroughly before installing the pads. I spent a couple of extra hours on adjusting the pads so they could move smoothly just because I didn't clean it with file well enough at first.
Its very important that the caliper bracket is cleaned of all rust/debris so the pads move freely. Thanks for watching and leaving a comment
Great video. Simple to the point. I watched a few others and I was screaming at how these guys weren't using lube, or changing out the shims, or bracket clips. Your brake job on this car was great. Now off to help my friend on his Camry.
Thank you for appreciating the work I did. Thanks for watching 👍
Veryyy usefull , thanks
Thanks for watching
Lmao the shade thrown
Thanks for the vid. Much love. Saved me $486k I think
Thanks for watching
I think Chris Fix was pretty transparent that some cars are diff. But thanks for the vid!
Thank you fellas my rotors were stuck I feared captive rotors....
Sometimes you need a big hammer 🤣
Great video, pretty straight forward and to the point. Don't know if the rookie mistakes where planned in but they were awesome. Thanks
Thank you for watching
What are the best brake pads to use for 05 camry?
Where is the rubber sleeve on the bottom pin? It was missing. Great tutorial.
Great video! Where are you located? I need brakes done on my camry. Your attention to detail was awesome. All the other videos I see they just slap everything back together without taking the rust off and adding the right amount of grease.
In Chicago land area , south side. Thank you for leaving a comment
@@themechanic6117 Damn, I'm in Texas. Finding a good mechanic is priceless. Thanks for the detailed vids though. This way I have the option to do it myself.
You're welcome
Good job. You kind of sound like Latino Chris Fix😉
😁👍
This video helped me change my womans brakes no problem. The passenger side wore down faster than the driver side. I greased the pins. If the pad wear doesn't change do I need new rotors?
Do the pads move freely inside the caliper bracket?
Same kind of car I have with the same problems the front brakes
Thanks bro great video.
Would this be the same for an 04 corolla. I’m just doing break pads.
Yes pretty much the same
@The mech a nic. Thanks bro for quick reply.
I subscribed ! cheers man. Great work !!
Thank you
That Permatex green goop brake grease will swell rubber seals and especially that bushing on the lower pin. Use a silicone grease or Sil-Glyde. Reason you had such a hard time removing lower pin is because the bushing was swelled from using wrong kind of grease.
I agree. I been using only silicone paste for those pins now
I've replaced the brakes on my son's 02 Camry(Built in Japan) I've noticed the brake pedal is a little spongy. I see no leaks but the pads were all substantially worn; 2 mils left on fronts, 1 mil left on backs. I want to self bleed them if I can and which wheel I start at depends on where the ABS modulator is. Any idea? I enjoyed your excellent video. No problem subscribing.
If you replaced all the pads and the pedal feels like that id first start with sucking as much of the oil brake fluid out the resevoir and see if it makes a difference with new fluid.
very nice videos. Can you tell me which pin goes where ?There is one with a rubber sleeve and one without.i have a Toyota Auris 2018 hybrid
Off the top of my head I can't remember. This is why it's important to only remove one at a time. Remove the one off the other side of the car and check it
@@themechanic6117 . Thanks for the reply . i already took them off
Can you use anti seize instead of the blue thread locker?
Those two do opposite things . Thread locker make sure your bolts come loose whereas anti seize make sure things don't get stuck, they may come loose
Bro u really said chrisfix 🤣🤣
Question how important are the clips that slide on top of the pads? when i removed my old pads they didnt have said clip but other side did.
Very important. With out the clips you get squealing/rattling and a clunk every time you put the brake pedal or hit bumps. I've seen it plenty of times
That happened in my cobra and they had brembo dual cyclinder calipers i couldnt find so i lived with the one side rattling over bumps for a while....didnt effect the function whatsoever...just the function of my mind because that became the most annoying thing ever
Definitely an annoying problem
@@themechanic6117 it wore me down like a nagging wife or crying baby seems to wear down some poor bastards i call friends! Lol. Thanks for the upload.
Bro what drill are you using, is that a impact drill, is it a special impact drill or something??
Its not a drill. Its a impact gun (milwaukee)
Did my brakes one pin was completely seize couldn't get it out at all had to buy new pins and a bracket
Yeah I've had to do that before
What breaks do you use
I like to use akebono . Usually I just use whatever the owner of the car brings me
Sir, besides the slide pins, where else should I lubricate?
Inside of caliper where the caliper touches the pads
@@themechanic6117 Thank you, sir! Did the job last weekend. Thanks for all the insight!. I did hit a little snag....after doing the drivers side and started the passengers side, I realized there were anti-rattle clips on each pad. I went back to drivers side and noticed that I only found ONE clip still attached to one of the pads. The other must have been knocked off as it ate at the rotor. Went to the parts shop and purchased new clips. Wasn't sure if I need them, but replaced them anyway.
Did you mention uncapping the brake reservoir
You can if you want.
@@themechanic6117 right on
Customer declined new caliper. And opted for 3 Big Mac Meal instead to feed family.
I'm planning to do mine on my 2005 Camry I never done brakes before I just hope I don't screw up anything 😒
Follow the video and dont forget anything and you should be ok
hey do you think you could make a video on how to fix a stuck car seat for a 05 Toyota Camry ive been looking for about two months now
What do you mean by a stuck seat?
The cars driver seat is stuck in the back position is won’t move forward apparently it happens often on these cars but no one has a clear video on what to do it will also help save people money if you do this because it makes the airbag light come on and I know untrustworthy mechanics will try to charge a arm and leg when the airbag isn’t even the problem
I'll make a note of it if a customer brings me one of those cars
So a buddy put front brakes on my 04 Camry. Last thing we did was drain the line and he's positive we did it correctly, I pumped then he bled the line 6 times on all four tires, twice. My brake pedal feels like it is taking waaaay too long to make the brakes respond. Any thoughts?
Why did you open the lines just to change brakes? Thats not necessary
@@themechanic6117 I think he did it since my brakes were bad, reeeeal bad, so he swapped out all the major components and thought replacing the old brake fluid with new was a good idea. There's no excess fluid coming out of anywhere either. He did overfill the main cylinder (almost to the top) and told me not to worry about it when I pointed to the Maximum and Minimum fill lines.
@@maxbegovich3395 sounds like you need to make sure theres no leaks and any of the lines he removed then bleed at those calipers and possibly bleed at the master cylinder
@@themechanic6117 I will do just that. Thank you very much for responding so quickly!
Do you have a video on how to flush old brake fluid out?
I have a video on a nissan altima.flushing brake fluid coming out soon. Its a different car but the steps will be the same for your car
Awesome thanks! Always great vids keep up the good work.
I'm disappointed... the rotor holes did not line-up after the plastic wrapping magically disappeared!!!
Back to watching... hope I don't see any more faults! =)
Lmao I Noticed that as well but in the editing stage there's nothing I can do... sorry,I have failed you 😭
What brand of rotor was that?
Coated rotor from rockauto.com. probably raybestos
No need to bleed?
No. Don't disconnect the brake hose and you won't have to bleed
*HEY GUYS! TODAY I'M GONNA SHOW YOU HOW TO TWIST A BOLT*
The reason that lower pin is seized is because that Permatex green brake goop swells that rubber bushing(any anything else rubber) Avoid using Permatex brake grease products on rubber.
Yeah i stopped using that inside of there
Excellent video.
Thank you
Do I need to bleed the brake lines?
No, don't mess with the brake lines. There's no need to bleed just to change pads and rotors
@@themechanic6117 ok thanks, but what if I change the calipers too?
Then yes you do need to bleed the brakes in that situation
@@themechanic6117 ok thanks again
😂😂😂😂 *cough* Chris fix