How to tear down an engine - Big Block Chevy - My first time.
HTML-код
- Опубликовано: 15 сен 2024
- Complete Disassembly of my LS5 454 Big Block Chevy.
Follow on Instagram:
/ ss454_ls6
If you would like to support the channel:
www.paypal.me/S...
/ ss454ls6
Amazon Affiliate Links:
FiTech 30012 1200 hp Go-EFI 8: amzn.to/2nJrvE7
Edelbrock Performer RPM Air-Gap 7561: amzn.to/3rZF9ke
Music By: "After The Fall"
Track Name: "Midnight Frost"
Published by: Chill Out Records
- Source: goo.gl/fh3rEJ
Official After The Fall RUclips Channel Below
/ @cloudunder
License: Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
Full license here: creativecommon...
Something to mention for all... when an engine is cold it doesn't matter any order to remove head bolts. That only matters when engine still hot do to expansion/cooling rate. Have a good ya all!
There is alot of power to be made with those heads with some work.get your cyl pressure up around 185-200lbs and get a cam that makes peak power at 6,000 rpm.glad it was all in good shape!
This is a great video, like just about all of them I've seen, but maybe I missed the part where you identified the heads. What heads are you running, did i hear stock LS5 engine?
What are your plans for the motor? My 427 is currently being rebuilt for my 69 Vette. I put in a stroker kit at 70 over it will be a 498. Looking forward to the dyno numbers.
Mine will stay a 4 inch stroke, bored .060 over.
Your plugs were too cold for 9.5:1. The ground strap doesn’t tell heat range. How many threads are colored does. You should have2-3 threads colored.
Overall the plugs show rich and some oil ingestion.
Have a look at the GM performance valley pan, like the crate engines come with.
Yes that timing chain has a lot of wear.
Looks good. 👍
always run steel mounts all around or poly all around or rubber, dont mix them
I ran a rubber mount and a steal mount on my old 402 bbc with no problem.
@@musclebone7875 got lucky, i run steel all around, so far 28 years later, no cracked trans or broken mounts.
@@matzrat5006 lol I guess I did. I run steal mounts now. My 496 makes alot of torque 😆
@@musclebone7875 i have a 496 , long rod , with 840 heads , flat top pistons. makes life fun.Changing the Heads to AFR Magnums , lighten up the front end a bit.
@@matzrat5006 840 are rectangular ports heads right? I'm running the 088 rectangular port heads with a flat top piston as well. What AFR heads are you looking at?
Are u running the procar seats in your chevelle is did they bolt right up
Yes Procar seats. Check out the install video: ruclips.net/video/FV_rXgIo7ls/видео.html
Go roller cam