La guia de tu sierra de banco esta invertida, eso es sintoma de que eres demasiado novato a menos que seas de mano izquierda, pero en el video todo lo manejas con mano derecha entonces porque la posición de la guia esta asi?
I've built one myself and it works like a charm. I used 1/2" MDF for the weight and it cuts a straight edge all the time. I did add handles to it, making it easy to pick up and place it on the work piece.
Глупая трата материала. При использовании такой дорогой циркулярной пилы, не купить фирменную шину глупо. Можно было бы понять, если бы циркулярка была дешевой китайской однодневкой, но так - смешно.
와우~ 이번에 보쉬 원형톱을 구매하게되어, 가이드레일 알아보고있었어요~ 제가 생각한 딱 그 가이드레일입니다~ 감사합니다. 이번주에 만들어볼게요~
감사합니다🙇
Looks Awesome Dude!
Nuff Said!
Buen trabajo Dakay"s
Very good. Thank you
Great video. Can you provide the measurements of the cuts, please? Grateful.
좋은 아이디어 감사합니다 한번만들어봐야겠네요
Thanks a lot buddy. This is by far the easiest to get started with. I M taking it up a notch by sticking measuring tape on both sides
Congratulations it's a really good idea =)
항상 왼쪽으로 받치는 가이드를 만들어 썻는데 , 가끔 오른쪽으로 엇나가는일이 있는데 그게 보완되는 형태네요!!너무 좋습니다 ^^ 감사합니다
I Added some past wax to the sliding surface and the saw just glides.
La fabrique hoy, me ahorra mucho tiempo. Buen video.
Hi.. thank you for everything you do..
I like you're job...Khalid from Orlando Florida USA
Thank you for your warm comment.😄
Using table saw without riving knife and with a glove. He's brave.
You seriously make some of the coolest things 😎 I really like the idea with the holes so you can keep an eye on the markings below 💡🧠🤯
Genius
La guia de tu sierra de banco esta invertida, eso es sintoma de que eres demasiado novato a menos que seas de mano izquierda, pero en el video todo lo manejas con mano derecha entonces porque la posición de la guia esta asi?
Great video, can we do a 45° cut with this guide?
Mantab Jiwa.... aWesome 👍👍👍👍
Thank you =) 👍👍
합판을 자를 때 합판과 가이드는 고정할 수 없나요??
Do you place your 3D drawings in 3D Warehouse Sketchup?
I've built one myself and it works like a charm. I used 1/2" MDF for the weight and it cuts a straight edge all the time. I did add handles to it, making it easy to pick up and place it on the work piece.
Nice work!! Thank you =)
классно !!! сделаю себе такую же !!! подскажите толщину фанеры
Excellent guide, I find it very practical and easy to do.
Thanks for the comment =)
Gut gemacht ! Браво !
It is accurate especially because One Minute Workbench came up with the design. You should give a shout out!
Thank you :-)
@@dekayscrafts 👍
Nice job
Thank you :)
thanks
Thanks too =)
뚝딱뚝딱 역시 목공일은 만들어가는 재미가 쏠쏠하죠~멋져요~^^
말씀 감사합니다~ 아재님에 비하면 아직 멀었죠~
아재님 공구diy 영상 정주행 하러 갑니다~👍👍
Es increíble que RUclips haya puesto 6 comerciales en este vídeo, solo para obligarnos a suscribirse a premiun
What do you call the bit that you used to drill the holes?
Pre drilling bit =)
Parabéns muito bom 🇧🇷🇧🇷
Muy buen trabajo. Una guía muy útil. Me gusta tu manera de trabajar, limpia y ordenada. Felicidades. Un saludo
Muchas gracias por tus buenas palabras.
Es un gran poder para mí.
잘 보았습니다~~ 트랙에서 톱날길 중간에 구멍들은 왜 내어 놓은건가요?
자르고자 하는 곳에 미리 그어둔 라인을 보기가 힘들어서 중간에 큰 구멍을 뚫었습니다~
원형톱 모델 어떤거 사용하시는지? 궁금합니다. 여러가지로 따라하고 싶은데 모델도 같으면 편리할것 같습니다. ^^
디월트 dcs모델인데요 구형이라 브러쉬리스 신형 구매하시길 추천합니다~
Essa sua serra de bancada é feita a partir de uma serra circular manual? Em caso positivo, tem vídeo da construção dela?
가이드레일 비싼데 이 영상 아주 좋아요 :)
한쪽은 철로된걸로하면 변형도 적고 반영구적일듯
감사합니다 메카님^^
Buena plantilla !!! Buen trabajo 👍 ... Saludos desde Perú 🇵🇪
Gracias👍👍
Hi Dekay, I'm new to wood woodworking. Do you have dimensions and materials lists?
Just imagine and make no data
I'm sorry I couldn't help you
You just make as long as you need and as wide as your saw.
감사합니다
시청해주셔서 감사합니다 ^^
Bem criativo, parabéns!👏👏👏
Obrigado~~ 👏👏👏
magnifico trabajo gracias por compartir yo lo hare igual
Gracias 👍👍
Buena idea, pero el dedo queda expuesto, hay q modificar y va a ser excelente!!!
Muchas gracias 👍
Gracias por el aporte y vídeo , buen truco.........
Thanks. It's pleasant.
....CAN A PERSON BUILD THIS WITHOUT WEARING A MASK?
There is a lot of dust, so I have to wear a mask.
Parabens.....bem pratico!
Obrigado. =)
Thanks man, I do this and works very well.
궁금한게 있어 여쭤볼께요 ^^;; 테이블쏘도 없고 원형톱을 가끔 사용하는데 올려주신 영상보고 가이드트랙을 만들어 보려고 하는데요 이 영상에서 사용하신 합판이 혹시 몇T쯤 되는지 알 수 있을까요? 11T정도도 괜찮을지 14.5T정도는 되야 괜찮을지 여쭈어보고 싶습니다
11T 정도로 가능합니다.
다만 톱날이 중간부분을 자르게되니까요
양쪽을 잡아주는 끝부분을 좀 길게 남겨야 튼튼할거예요~
Muy buen trabajo
Muchas gracias :)
GENIAL 👍👍👍
그 집성목?으로 만드신것도 하나 만들어보고싶네요^^ 첫 댓글이지만 항상 잘 보고 도움도 많이 되고 있습니다
감사합니다 ^^
좋게 봐주셔서 감사합니다 ^^
타일 원형톱 레일 가이드 알아보고 있는데.. 너무 비싸네요.. 김팀장님이 만든 것 보고 흉내 내봐야겠네요^^ 감사합니당
와주셔서 감사합니다~~
Make it 9 feet long for horizontal cuts!!
Yes sir =)
Great and useful
Awesome thanks
Desconsidere a pergunta anterior, achei o vídeo da bancada.
Muito bom!
큰 도움 됐습니다!!!
Mash video all the way up to where it shows he didn't show cutting holes in the board
GOOD JOB !!!
Thanks !!!
He literally has a table saw.
И что делать с этим?
Пожалуйста, смотрите мое новое видео
ruclips.net/video/c5pc_4wcQ2k/видео.html
Tidy job but the zero clearance track was and is far more accurate.
👍 👏👏👏 🙏
😀😁😁😃😄😆
😉
Now to spread a little bees wax on it, and watch it slide!
I'm still a beginner and difficult but I'll try. Thank you. :-)
Глупая трата материала. При использовании такой дорогой циркулярной пилы, не купить фирменную шину глупо. Можно было бы понять, если бы циркулярка была дешевой китайской однодневкой, но так - смешно.
😎