Velvet Drive Marine 10-17 Transmission Overhaul Part 1 Teardown 1:1
HTML-код
- Опубликовано: 25 авг 2024
- This video is the first part of two videos of teardown and inspection on a 10-17 1:1 ratio transmission. Techniques, tools, tips, and general information is discussed. 71C and 72C are similar along with the reductions.
Here is the link to the assembly: • Velvet Drive Marine Tr...
Subscribed. A man that can call out transmission components piece by piece is a rarity. Thank you!
Incredibly educational video Chris. Thanks for posting. My Paragon HF-7’s are being rebuilt right now
I haven’t done one of those for a while. I do have a P44 video posted. 😃
Thanks for the oil feed ports info. Helps to understand the way it works...
Incredibly educational video Chris. Thanks for posting
Thank you quick and to-the-point.
You're welcome!
Super awesome and informative , Thank you
Glad it was helpful!
Saved me 1000 dollars, thanks
Thank you for such a great video and explanation!!!
Glad it was helpful!
Excellent! Thank you!!!
Gracias por su conocimiento.
Saludos desde Mazatlán Sinaloa México. 🇲🇽
Awesome!, so helpful and I appreciate it greatly.
Glad it was helpful!
Top quality.
Thanks for the videos. I have a hurth hsw450 1:1. After running it wide open for an hour it blows fluid out on the input side. It happened twice after replacing the input seal.
Thank you !!!
Hi, My 71C started making a clanking noise out of the blue. I hear it in neutral but less in forward. More in reverse. Seems to get quieter as it runs more. Can I send to a video of it? Maybe more fluid? Maybe an additive? It may need to be sent to you this winter for rebuilding.
Nice.
It was like watching Steve, at his bench, calling it as he pulled down an auto AT. If only they knew where and how to look. The rest is basic 101 stuff. Super complicated cagofarfilistic 😉 😜
Saludos hermano me pudieras decir está caja cuantos HP tiene
Hello, I don't understand well with the translator, so this diverter can turn perfectly in both directions provided that the pump is reversed? THANKS
Very good video just rebuild a 72c but my rear output flange is leaking , i have put right stuff and got a new flange and it still leaks any advise ?
This video pair is a beautiful thing, my only issue is the aluminum piston is stuck, air moved it a 1/8” but no further. Should i be able to spin it in the cylinder? Can’t do that either, being aluminum i don’t want to force it. Cheers!
Heat doesn't help, open to suggestions, lol.
Chris, excellent stuff! I have a 72C mated to my starboard 454 Crusader that rotates the shaft while in neutral. Not very strong, I can stop it with my hand but it's not supposed to do that. Fluid levels are normal, both cold and hot. What do you think is the cause?
If you can stop it with your hand, don’t worry about it. It’s normal.
Houlaaaa! :) what great work!! where to find this rear bearing mine also is 1.1 my bearing has play, I am in France ,merci.
Hi, I have an AS15-71C with a 2.91:1 reduction gear box. In the video you mentioned that there is a different rear seal for that. The kit I was going to order is the velvet drive 70C 71C 72C marine transmission super master kit on eBay. Do you know if that kit would likely have the correct seal?
Hi...can I change a rear bearing without having to pull the drive off my motor...have access looks as though they are a snug fit, just need to remove nylock nut/rear bearing plate/gasket and should have access to bearing ??
My velvet 1:1 pump have a damage is it same pump fits for the 1:1 velvet and 1.56:1 velvet? I have one velvet 1.56:1 velvet drive
Hello from Italy, explain to me the cause why in my inverter the shaft oil seal was expelled by the oil pressure? Another time, however, did the oil come out of the upper breather valve? Does it need to be overhauled? Thanks for your answer...
Where is we can buy repair kit of this gear box
What happens if the plates in the forward clutch gets overheated?
What would cause knocking sound in a velvet drive?
An uneven running engine such as a misfire. If the idle is too low that could also cause it. 99% of the time the transmission is not the cause.
Is that transmission a Worwagner?
Great video, you do a terrific job of explaining all the parts and pieces.
I have a question, what would make the transmission slow to shit into and out of gear?? I have 2 Chrysler 360's and when I shift the port engine into gear there is a good 3 or 4 second delay before it goes into gear, the starboard engine does not have that delay???
I would love to know why.....
Thank you!
I'd put a pressure gauge on it and see what the pressure is. At idle it should be ~100psi. I assume you are using ATF for fluid?
Do recommend the old style velvet pump that the front pump seal can`t blow out. or the new style that presses in from the front. or does it matter?
You have it backwards. The pump style with the lip (seal is installed from the rear) is the newer style. I have no preferece and use both. If we get a job in that the front seal has pushed out and during tear down I don't see a reason why I'll normally install the newest design pump with a seal lip.
Morning fantastic video i have learnt a lot from this video , i have a 72c connected to v drive on boat could you possible tell me what holds the v drive to the transmission or will it come apart when i remove bolts kind regards
Usually just bolts....
@@LakelandAutoMarine thanks for reply, i just jump in with two feet and yes it was just the bolts and the gear collar thanks again
Hello from Austria, I have a problem with my velvet drive 10-16 which is used in my jcb wheel loader model 520 4hl built in 1984.
When I put it in reverse everything is normal, but when i put it in the forward gear it feels like the clutch is slipping and there is not much power at the output shaft. When the oil is cold it works better, but when its getting warm it gets worse.
I think maby the o-rings of the forward piston cause the problem.
I hope you can help me with my problem.
With kind regards
Marcus
I’d start with a pressure test. Sounds like an internal leak someplace. You might be on the right track!
Any experience on 73c 3:1 ratio? Mine suddenly dropped forward gear without any slip. So now i hane neutral-neutral-reverce. Any suggestions?
Need to check pressure.
Hi I have a Velvet drive 1:1 AS1- 71c, red tag, serial number is 105456...
it only has 1 x reverse clutch disc, is that Normal? Rob
Yep.
Hi. Are you sure that the ring is not in the groove in 14.24? According to the repair manual it would be a snap ring. I have a little groove there in my velvet
Yes. There is no groove there. If there is it’s not enough to engage the snap ring. It’s a spacer.
I also have a groove and that's where my ring was while tears down
Helli sir,
My gearbox reverse clutch only have one brass plate(Not 3 plates like yours)… is that normal??
I am not sure which marks and model is my velvet drive but it is connected to a classic 260HP Crusader engine
Yep, that’s normal for an older model.
What kit brand do you recommend. Also where can I buy the kit from?
We normally use Alto or OE here. We can supply parts.
I’m about to tear into this 1973 71C transition. It had well over 125 psi in reverse using the test port you show. After rebuild, what type auto transmission fluid do you recommend? Thanks
Any good brand Dextron II or higher.
Thanks for the reply. Have a great day. Thanks for the video!
Hy can tell my where i can find this test table for velvet transmission ?
We had it made.
Just need to let you (to release my velvet drive model) that my oil baffle is steel made(Not the plastic one like yours)
Yep, that’s an older model.
I noticed the pump arrow is pointing left. That is a starboard trans as noted on top there. Mine is a V drive starboard and pump shows pointing right that i just took out. Is that because of the V drive? I would love to send you a pic. I hope my rebuilder got it right. Is starboard considered Standard rotation ?
That’s not always an indicator of what side the transmission is setup for. For instance a 1.88 or 1.91 is a reversing ratio. As far as your V Drive there is a configuration which is all gears (3 to be exact) or a chain version which would reverse rotation. The pump needs to be set for the direction of flywheel rotation.
@@LakelandAutoMarine Ok Ty I guess i can put a gauge in the port to test pressure quickly by bumping the starter. Just to make sure. There is no temp alarm there but will be now..
I have a velvet drive stuck in gear does this mean it needs rebuilt ?
More than likely. With the engine off can you rotate the output shaft in either direction? If you can't, then it needs to come out and get rebuilt.
no I can't get the output shaft to spin in either direction the only time it rotates is wen the engine is running, iv disconnected the shift cable and shifted it by hand and nothing changed, the fluid still looks new, the velvet drive is a 10-17 1 to 1 model , boat is a 79, im thinking about tearing it apart your videos are very clear and explain wat todo , my local marina hasn't worked on one in over ten years and I can't find anyone to look at it.
I have a 10-17-004 that wont turn and is stuck in forward. What's likely wrong with it? @@LakelandAutoMarine