120/100 25kw Freerchobby motor Unboxing and First Run on a VESC 250/100 controller
HTML-код
- Опубликовано: 5 сен 2024
- Hi everyone
This is the unboxing and first run of the 120100 brushless motor from Freerchobby.
This is the 121kv version
MOTOR: MP120100
KV: 121/80/55/42/35
MAX POWER: 25KW
ESC: 300/400A
MAX VOLT: 100V
MAX CURRENT:300A
CONTINIOUS CURRENT:180A
THRUST:55KG
TORQUE:35Nm
RESISTANCE (Ohm):
SIZE: 120 x 120 ( without shaft )
STATOR: 60mm
NET WEIGHT (kg): 3.9
SHAFT: 12mm
Here are the links for all the parts used in this video
Brushless motor: www.freerchobb...
Vesc controller : trampaboards.c...
Batteries: hobbyking.com/...
Throttle pedal: www.ebay.co.uk...
Thank you for watching.
Please subscribe if you want to see more videos like this
When you are using anti spark XT plugs into an ESC with multiple power input plugs, you only have to go slow on the first. Once the first is plugged in, the capacitors are charged and at battery voltage. So no spark for the other two.
I know but it a habit that stuck due to a lot of failures when rushing. And playng with high voltage you need to be extra carefull
Did you measure the winding resistance of that motor? I have been trying to find that information everywhere.
Wow dude I was o ly here to design an outboard long board motor. Good to know 10kv will do fine 😅😂
Informative & useful video. Thank you!
use the tcp bridge so you don't have to connect by usb
Thanks for the demonstration, really great! I have read mixed reviews about the manufacturer of this motor, freerchobby... How are you finding the quality control of the motors and escs you have purchased from them?
Thank you. The controller is not from them it is a VESC 250/100 from Trampaboards.com. About Freerchobby i purchased 2 motors from them and for me they were very responsive. Fast delivery. They modified one motor for me and when i tested it had a bearing noise so in a week i received a full set of bearings. Also all payments go thru PayPal so you have buyer protection
@@ExtremePowerWheels Ah sweet👍 Much appreciated for the information on your setup. Buying through PayPal is a wonderful tip! Do the motors come with warranty, or is that covered in PayPal buyer protection?
@@fenton5392 Honestly i have no idea about warranty. I am using the motors for custom builds and i do not expect to be covered by warranty anyway. i am modifying the motors to fit my builds. If they work at they beginning. the only thing it can fail are the bearings and nobody is giving warranty on bearings. I think it is best to drop them an email and ask Juliet-wei@freerchobby.cc You can tell them you found them on my channel if you like
@@ExtremePowerWheels Ah okay. Likewise, i only intend to use it for custom builds. Thanks for the email address, I'll start quizzing them 😁 Last question, I hope this not to invasive... how much did the motor cost, including shipping and import? I'm also based in England and just wanted to get a ball park of price to expect 👍 Thanks for your help and time dude!!
@@fenton5392 i ordered striat from The website. Transport is 35£ anc customs i do not remwmber now
FreeRC have quote very high power numbers... but very low weights. How did it go under a rated 15kW load? I suspect they'll only do 1/2 of what they are rated for before heating up too much. How did it end out?
I would also very much like to know this! If the rated performance is limited by heat though, there’s a simple solution: mount some fans next to it! A few 12v, 3a fans or the type you get for car radiators would certainly give enough cooling. Maybe it wouldn’t even need that much.
You like this board the best? Also how does the stock motor run at 75 volts, any overheating issues? I plan to upgrade the wiring on mine to 12awg. Starting to order parts now. Looks like it needs front disk brakes also. Not a fan of the cable system, I'll probably go hydraulic. Awesome job bud. Can't wait to see more on this
The stock motor runs with no isues at 75v. I recomend using 10awg wire for the motor. And i will do a video on front brakes soon. It is a bit more work then the rear because front axle needs a lot of reinforcement
Ok I'll order some 10 awg. What about the battery connectors you use, the anti spark ones? New to brushless motors, I'll get there. I did Smoke a 14mph electric razor dirtbike with my daughter's jeep. Its pretty quick i have to turn it down to 12v max with her in it. It's controlled by 2 motherboards. Should have the ysa 021 soon, can't wait to work on it. Thanks for the vids! Stay safe man, that thing rips!
@@JWnVB Thank you. With a vesc controller you can limit the car speed and power directly from your phone. We can chat more on facebook @ExtremePowerWheels if you need more help
@@ExtremePowerWheels does variable dynamic regenerative braking work with this motor/controller/battery? If you have regenerative braking on for a boat propeller with low rpm. Can you turn down the resistance on the engine (variable magnetic field) and make it spin fast with some gears and a larg flywheel? mabye make it work like and alternator to stabelize the output voltage?
Can it be used for ebike?
Did you make those adapter that connect the VESC to the motor?
Nice. Thanks.. Loads of usefull info.!
You're welcome!
@Asher Gael LOL..! And wnay would you do that...?
Dod you find what you where looking for on her Instagram.!
@Asher Gael I'm in to redpill if you you what I mean.! What you saw on her Instagram, that life.. Women regardless of being in a relationship will post all of them being nice and sexy.! That called hypergammy.. And Instagram it's a tool what they use to maximise their hypergam. Pus nature.. It's means that there is always a bunch of beta orbiter who will follow her. Pay her bills. Compliment on her good looking she is.. Women are drunk on social media attention from men nowadays.!
So.. If for example on Facebook or even Instagram there is only her without you in the pic Be CAREFULL. You can be replaced at any moment with another dude..!
@Asher Gael But most importantly don't get but hurt because of what you saw on her Instagram profile..
Work on yourself, and don't be gelous. If you see her asking a girls night out, that when women cheat - it's mature.. They most do that whwn they ovulate.. It's all subcutaneous..
If she does go out on wirh her beasties. Ist over.! Well the relationship might last but you will be used most probably as beta bucks..!
@Rhys Jamir but is it really worth it. Because now you see the real her..! What's actually going on in her life behind the scenes..
Now you see the real female nature.!
But keep in mind not all women post pics of them online to get attention and to boost their ego or get more betas to follow her with which she will barely ever sleep.. Women sleep only with alphas.. It's their basic nature to do that.. We on the other hand will sleep with almost any women possible..!
But
Amazing, what is the total Price please to buy all the parts ? Thank u 🔥💪🔥
What driver are you using to communicate between your vesc to your laptop?
They have a free tool on the VESC website. Version 6 was just released.
Hi, did you combine all three inputs of the VESC together? I would like to use an 18s configuration made out of three 6s packs and was wondering how to do it, and if it would be ok for all three inputs to have the same source.
Yes they are connected on the board together.
Wow! 25kw? May this motor move a little car?
It definetly will... Cars like the Citroen 2CV only had up to 21kW
Do you think 1 of these with a gear reduction would help a small car accelerate rapidly? Or would I need something larger or 2 of these
Its got 35nm of torque so it would be good even without a gear ratio but depends on wheel size
Good job!
Thanks!
Hi, great informative video with added 'new box/toy' appeal! :o)
I have a question: You connect the batteries in series but then have three VESC connectors -am I right this is just so the VESC has the possibility to parallel up batteries if needed but in this config you are just connecting all three power inputs across the series output of the three batteries -i.e. 66.6V is going into each of the VESC Power inputs. Also whats the max power of this setup and have you tested to 25KW (I think this may be a burst power rating and real world is about half that continuous no?)
Hello the vesc conectors are wired toghether. There are three connectors to spread the load between them
Ia zii Frate esti Roman
Am nevoie de niste informatii
Nu stiu Sá vb. Engleza
Given that your 3 battery connectors are all in parallel both on the battery side and the vesc side, it is only the first 'anti-spark plug' that you connect that is doing the 'anti-spark'. After this first connector is attached, all the others are already at the same potential and you can connect them immediately.
I know but for safety i added 3 antispark switches. I have another vesc and i will use 3 antispark switches in parallel in case one fails
Ayy I was wondering would this be a great set up for a powerful mini e bike I’m using a old super pocket bike frame. I want something with extra power for off-roading
This motor is quite powerfull i have seen it installed in a go kart and it was crazy fast
What if I use a DC power supply 24V 10 Amperes to test a 25kw motor with 400 A 22s ESC?
If you only supply 240 watts to a 25,000 watt motor it's not going to work.
Is there necessary to programming?....i mean....i can use motor , controller , battery and throttle only, is that's work directly?
No it does not. First it is not brushed motor. This has a lot of wire coils witch need to be powered in sequence to make the motor spin. Also the cables are very thick i dont know what throttle pedal can work with that amount of power
Where can i get these connectors?
is this motor waterproof?
Hello. No . I plan to build a steel shield to protect it better but also allow some ventilation
What is name of esc you using
So, what error did you get?
What is meant by motor type in website
Mujhe bhi ye motor leni hai uska rpm kya hai
Hi! Could this motor be used for an electric body board? It is for people from 100kg to 130kg. Thank you!
If it for water board i do not think so. Because this motor needs a lot of ventilation to cool and it very dificult to make it waterproof
@@ExtremePowerWheels thanks friend....
It can be use for man drone?
it is a paramotor so it is a propeller motor. That is all that i know. I don't build drones. I want to use it on my electric power wheels
hey the spec sheet on their website is weird. they have a lot of conflicting information. Can you help me out? based on their motor specs its supposed to run at a maximum of 100V but they are running it at 111V and you are running it on 88.8V? i dont understand which one is the correct one for maximum power. 18S or 24S or 28S or 30S?
Hello
I am aiming to run the motor on a 22s battery pack but i am shure it will work with 24s. I have been runing higher voltage on other motors than their ratings and worked just fine. As long as you keep them cool. Of course the wear and tear is bigger especialy on bearings. But any motor can work at higher voltage as loong as it is cool. It will spin faster. The ratings for this motor is maximum 100v. It is up to you if you want to runn it at higher voltage
@@ExtremePowerWheels how many amps are you pushing into this at what torque?
@@jayesh1398 i haven't installed the motor yet so i cant test at full load. My controller can provide 250A continuous. So that woud be the maximum for now
@@ExtremePowerWheels okay thanks for help cheers x
Voltage does not overload a motor. Wattage/temperature does.
Can the silver propeller shaft extender part be removed/replaced on this motor?
It can be removed. That is the next on my list to find out how because i need to install it in my porsche ride on car
"Can be removed", easily & nondestructively, I hope? (Not like with a lathe or mill.) I'd be interested to see a video showing that.
I have bought the Turnigy (Hobby King) RotoMax 150, but the shaft extender adds width that I don't want. Almost makes me wish I had realized beforehand, and gone with the Turnigy CA120.
It has some alan bolts from inside. The rotor needs to be removed and then you unscrew the alan bolts and remove the propeller holder
Thank you!!
Hello can you tell how much ampere ESC is used to run 25 kW motor
Hello
The esc i am using is a vesc 250a continious at 22slipo
@@ExtremePowerWheels thanks how much time we can continuosly run this motor
I want to buy an Aerolite 103 ultralight use my own electric power system they sell one want $13k for it. It would need to swing a 50 inch prop.
Can I ask u something sir please 🙏...how many I need to fly with one person..say 100kg
hello. i do not build flying vehicles so i dont have an idea. please check the manufacturer website and you will have some thrust figures. then you calculate your weight = the weight of your man drone and you would know how many you need
make sure you take in account a large battery pack
@@ExtremePowerWheels thanks for replying and advise 🙏 😀
how are you using a petal throttle with a vesc?
Any vesc based controller has the option to have manual throtle, reverse switch and cruise switch. It works with 5v 3 wire throttle pedal. Green pin to adc1 black to ground and red to 3.3v or 5v on the vesc port.
@@ExtremePowerWheels okay. So if I got any go cart pedal that works with an esc I could make that work as long as I rewire the connector? I’ve only used wireless ppm with vesc on my electric skateboard so this is unfamiliar territory.
@@koenwilliams8819 yes it works with any electrical pedal. the one i use costs 10£. we can chat on facebook fi you need more help @ExtremePowerWheels
@@ExtremePowerWheels yes please, that would be perfect
hi, how come you never fitted this motor in the car
I was very bussy with work. I run a construction company. And all my free time i spent with my wife and 2 year's old son during this lockdown. It takes a lot of time prepairing, planing and doing a video, especialy for me as i am a newbie. And to install that motor first i need to add front brakes, a steering rack and reinforce the chassis. I promise some new videos soon
is it possible to control it using arduino?
Hello. From what i read on the forums it is posible. But i dont know how. Try vesc-project.com
@@ExtremePowerWheels thanks for replying
What is the cost of 25 kW brushless motor is
I do not reprezent Frerchhobby. I only bought the motor for me. So i do not know the price for your area. The best way is to go on theyr website and they will have prices for all their motors www.freerchobby.cc/
I need a vesc for my two 80cc 51v 200A max with 160kv please help me with the electronics ,send me links
Esti cumva roman?
Salut. Da sunt
@@ExtremePowerWheels foarte tare. Am si eu doua proiecte pe teava cu VESC. Primul la care lucrez acum e o masinita smartish RC (o fac ca sa ii dau microbu’ lu fi’miu). Apoi cand mai creste un pic peste vreo 2 ani vreau sa’i fac un cart. Mai vorbim. Te gasesc prin vreo comunitate pe undeva?
What vesc is that?
It vesc 100/250. Here is thw link
trampaboards.com/vesc-100v-250a--22s-c-1697.html
25 kwatt??? Wau.
Or 25 kv
25kw 120kv(rpm/volt) the specks from the manufacturer in China
@@ExtremePowerWheels how mach amper dc from battery curent? Max. Senks))
Can you be more specific?
I havent installed the motor yet. I plan to use it on my wite ride on car very soon. I have a 22s lipo pack 92v 40A . Discharge on that is 480amps continuous. Hope that answers your question
Damn converting a gas plane 80in is going to codt me over $300
I think it will cost a lot more if you count batteries and controller
হাই
Bu ne be bize ne bu yaptığın şeyden aklını kendine sakla.