Great video. Enjoyed it. I picked it up, too. After the rainshowers here, I went with 40:1 and worked very well for me. Can't wait to try it at 20:1. Thanks for sharing
Thanks for the content brother and love the shop! I saw on EC Details KCX tour you mention the combination of MSN as pre-wash with Super foam/active foam as the contact wash if you wanted to strip or prep a car for ceramic coating. I mainly install ppf and ceramic at the shop. How would you dilute these two in an MTM foam cannon/ Kranzle setup just like yours? (I have the OG wall mounted custom pressure washer solution as well) Currently I’m doing an apc rinse if bad, Obsessed Garage Decon Soap before ceramic or PPF packages but bought this combo tonight and have loved everything from Koch Chemie I’ve tried so far. Appreciate the help and God Bless!
I was doing 2oz to a 32oz foam cannon. That's a little strong isn't it. Last time I did 1oz MSN and 1oz Active foam for more foam. Active foam wasn't doing it for the dried small bird poo. MSN destroys it and kills caked on wheel grime. It's gunna replace a few product for me.
Is this something you can use regularily or is it a little harsh unless the vehicle is extra dirty? Currently using Active foam as my pre wash foam. Just wondering how they compare.
What will happen if I use msn 1:30 on a vehicle that is only protected by Koch chemie s0.03 and I apply that sealant after every wash and I do wash my vehicle every week. Is there any side effects?
whats the big difference between this, and Green star, and super foam? I've been using Geen star 1:10 in my foam cannon for a pre-wash and I'm thinking about switching that up for MSN, or super foam, or is there another product KC has that would suit better?
For 4% PIR I've had to use 270ml of BH. That's 1:2,7 ratio. For MSN or VBN (Europe) I've been using it 1:10 with very little difference. With the MJJC foam Cannon at 1:5 - 1:7, it creates too much foam so it doesn't stay that long on the panel so for me that's product waste.
Nice vehicle! I love MSN for heavily soiled vehicles. I don’t need it often, but keep it on hand for so I have it ready.
Good stuff, MSN has quickly become my favorite high powered pre spray. 20:1 in my IK foamer and 10:1 in a standard foam canon works amazing....
Just imagine if I had went 10:1 on this. I think 20:1 did a great job though
Great video. Enjoyed it. I picked it up, too. After the rainshowers here, I went with 40:1 and worked very well for me. Can't wait to try it at 20:1. Thanks for sharing
Great video definitely gonna have to give this a try. The garage looks awesome appreciate the content.
Hopefully I can do a garage tour vid soon
Bring that thing up to Chattanooga this weekend for the Riverside show.
I’ll see what I can do
definitely great for the environment..
Thanks for the content brother and love the shop! I saw on EC Details KCX tour you mention the combination of MSN as pre-wash with Super foam/active foam as the contact wash if you wanted to strip or prep a car for ceramic coating. I mainly install ppf and ceramic at the shop. How would you dilute these two in an MTM foam cannon/ Kranzle setup just like yours? (I have the OG wall mounted custom pressure washer solution as well)
Currently I’m doing an apc rinse if bad, Obsessed Garage Decon Soap before ceramic or PPF packages but bought this combo tonight and have loved everything from Koch Chemie I’ve tried so far. Appreciate the help and God Bless!
I would run 20:1 on each
What is the difference between MSN and Vorreiniger B? (VB). And when you add diluted products to the MTM cannon, what setting do you use?
You just earned a sub...
Great content!
Much appreciated
Any plans to do a finished garage tour?
For sure. Stay tuned
Great stuff. Did you follow up with a contact wash? Very impressed with the cleaning power.
I actually just did a quick rinseless after
I was doing 2oz to a 32oz foam cannon. That's a little strong isn't it. Last time I did 1oz MSN and 1oz Active foam for more foam. Active foam wasn't doing it for the dried small bird poo. MSN destroys it and kills caked on wheel grime. It's gunna replace a few product for me.
Is this something you can use regularily or is it a little harsh unless the vehicle is extra dirty?
Currently using Active foam as my pre wash foam. Just wondering how they compare.
Msn is a bit stronger. I typically only go to MSN if my vehicle is really dirty.
I used Multi Star for several years, but I don't understand what is the difference between MSN and MS?
Basically the MSN is without Nitrilotriacetic acid
I just bought GSF anf AF- looking forward to trying them. Would this be more equivalent to super foam?
Thanks for the great video! What type of coating is on your FJ? Do you use any trim and/or wheel protectants?
Coating wise I just use S0.03 sealant. I add it about every other month. Trim is coated with C0.02 as well as the wheels
What will happen if I use msn 1:30 on a vehicle that is only protected by Koch chemie s0.03 and I apply that sealant after every wash and I do wash my vehicle every week. Is there any side effects?
if you still notice beading on each panel after the prefoam stage and contact wash with a neutral soap then your sealant is still there.
@@rgvautoprois it safe to use msn on a weekly basis?
whats the big difference between this, and Green star, and super foam? I've been using Geen star 1:10 in my foam cannon for a pre-wash and I'm thinking about switching that up for MSN, or super foam, or is there another product KC has that would suit better?
Msn is a stronger Alkaline than Gs. So with Msn you would use less product for a strong dilution.
Same. I like MSN better for the bird poo fighting. It's stronger.
Amazing video 🫡
This stuff looks amazing!! I have a IK Foam Pro 12 , what’s a good dilution ratio for it! Thanks
I would still run a 20:1
Thanks, def going to try this!👍🏼
Where can i get that mesure cup😮
Shot Glass Measuring Cup 3... www.amazon.com/dp/B0CLPJ2LRB?ref=ppx_pop_mob_ap_share
How does this compare to BH Touch-Less?
I’m a KCX guy. I honestly have never used BH
For 4% PIR I've had to use 270ml of BH. That's 1:2,7 ratio. For MSN or VBN (Europe) I've been using it 1:10 with very little difference. With the MJJC foam Cannon at 1:5 - 1:7, it creates too much foam so it doesn't stay that long on the panel so for me that's product waste.
First!!!
For the win!!!