How to Build & Setup a Block Wall DIY Part 4
HTML-код
- Опубликовано: 26 авг 2024
- In this Video we Finish up the Block wall Build and show the art of building and laying concrete blocks. Hope you all enjoy! Dont forget to LIKE,SHARE,SUBSCRIBE, and COMMENT if you have questions! Email: DavidOdell@OdellCompleteConcrete.com
Phone (714)454-7637
Website www.odellcompl...
Where to buy My Shirts: squareup.com/s...
Patreon Account: bit.ly/2IBj8Q7
Follow us on Instagram! : goo.gl/R9JLXu
Check out our Facebook and give us a Like! = bit.ly/2BA6LEY
OdellCompleteConcrete tools:
Shop at Amazon for your tools : amzn.to2naDkg
Table Saw Folding Stand : amzn.to/2Fp9hKA
Makita 70lb Jack Hammer: amzn.to/2HzoJdg
Makita 35 pound Jack Hammer : amzn.to/2KlXhgT
Hilti Totary hammer Drill : amzn.to/2vWZpZj
Skill Saw: amzn.to/2JB7818
Skill Saw with Laser Guided : amzn.to/2HC3FyB
Marshalltown Finishing Square Trowel 14 x 4: amzn.to/2jddpok
Marshalltown Finishing Square Trowel 24 x 5: amzn.to/2KlyYj3
Marshalltown Finishing Round Trowel 16 x 4: amzn.to/2vTxV6F
Marshalltown Margin Towel 6 x 2: amzn.to/2JAow68
Marshalltown 6 x 3 Edger: amzn.to/2r5Pvzo
Marshalltown Walking Edger : amzn.to/2r7qlka
Marshalltown Rock-It Adjustable Bull Float Bracket: amzn.to/2jfkmoQ
Bon BullFloat and Rock N Roll Bracket: amzn.to/2jg20nM
Milwaukee Hammer Drill/Driver : amzn.to/2r7G0PI
OdellCompleteConcrete@gmail.com
OdellCompleteConcrete.com
You have good masons. They work really good as a team and work clean.
For sure
TY
Nice job! I guess concrete runs in the family blood. Thanks for giving background on the design and building codes.
no problem! and yes it does !
Watching this video here in the UK - it's excellent to watch. I have dug up my garden and am looking for tips on the foundations, the explanations in this were exactly what I am looking for. Thanks for making these.
YW
So efficient these block setters no wasted movement 🤙🏽
Oh Yes
This was so helpful on getting ideas to build a block wall around the property line. Thumbs-up guys. Enjoy watching your videos..
Thanks so much!
Got a shoulder surgery had to stop working construction fuck watchin this reminded me of the good old days.
Learning a lot from these videos. Thank you.
YW
Cut those cap blocks, to make the joints line up properly. It adds a decorative appeal to the top course, and, ensures the integrity of the top of the wall. Simply add a 1/3 block as needed.
I could watch people lay block until the cows come home!
Thanks again for another great video.
Rod
Isn't it fun
That guy has a good looking mullet
He's stud status
you got that right !
That wall will never fall over great job I love watching your videos. I really want to go somewhere where I can do it all year round I live in michigan
That's here in Southern CA. or AZ. or NV
So the inside of the blocks dont get concrete ? What's the rebar for then ?
Check 1:50 and 3:17
Yes where steel occurs, concrete goes around
@@AnyMedia nothing at those times. What are you trying to point out
Great work, love the work ethic - final result shows
TY
Nice job! My garage slab is being poured tomorrow.. hope my result is as good as that block wall!
Me too
TY
Costa Mesa's 3 foot deep footings are ridiculous i did one during storm season when it rained...and had a comercial inspector who was temporary who did not give me any breaks dirt was caving in from sides slab cement slab from side walkway house caved in although my first job was a insanely disaster i learned alot and completed a nice lookin wall 😪.... Good Job mr Odell
Wow
I didn't think you needed inspection for wall 3' and less.
Yes perfect work that is king of concrete what is Mr.Odell
TY
Wall looks clean!!
ty
Will i ever build a wall? Probably not. But this video makes this cup of coffee great.
TY
I feel like you guys work extra.. my 3 masons with me as their tender would of had that wall up in 70 minutes.. no scaffold with grout stop , jointed, and rebared ready for inspection.. greetings from Las Vegas NV!
I lived in Vegas. The walls there have no head joints. Faster and easier to lay.
Odell Complete Concrete for 6’s yeah haha days we get to lay those they go on like butter! We stay with 8,10, & 12’s most of the time
Wait a minute, did you pour concrete in those spaces where you put those rebars in?? If yes, it's not shown in the video. If no, then am I missing something?
Check 1:50 and 3:17
Yes we didn't show the grout going in.
2 yds. of bag mix
Odell Complete Concrete yeah did the bond beam have grout horizontaly from end to end and did the verticals get filled as well???
@@AnyMedia nothing at those times. What are you trying to point out
cisa93 we love to see it done on future videos
Good job. Great workers- family. Nice video. L.V.NV. 2-23-2020
TY
Nice work! They make it look easy.
That's what pros do in very field, if given the opportunity
Good looking wall there, nice building work
TY
I always notice a crack on one side of the head joints every time the block masons put single head joints instead of double. (That’s after the mortar gets dry)
Don’t know why this was in my “recommendation “🤷🏻♂️But glad it was i watched a few videos and damn you do good work! a no bullshit contractor nice! and a Layla intro! definitely subbed! cheers from lake arrowhead 🍻
TY
Beautiful work, I will do mine the same
good idea
TY
Looks great. Merry Christmas
TY
you to
Nice wall David 👌 keep up the good work.
TY
good
Ty
Thanks for the vid. Great job as always
TY
Watched a lot of your videos now first one I’ve actually seen you. You look nothing like I thought, I had you about 25 or so. Nice job.
reverse those numbers and you would be right
Is that a special tool (tool of the trade) at 10:47 to the left of the vertical rebar, what does it do, and how do you use it... another great video...
Yes, for jointing
I think he's talking about the line bar/line jack/line dawg, whichever you prefer. It holds the line. The line is your reference point. You lay your next course to the line and so on
@@Eeek183
Yes, it's only in frame a few seconds...
Everett Ness the chicken leg? Lol
outstanding!
TY
Interesting new kind of project done by subs.
OSS
@@OdellCompleteConcrete Hi Dave. Not sure what OSS means. Is it On Site Services?
Looks good. The only thing that I am surprised the inspector didn't catch is that the mid bar isn't grouted properly. The mid bar is supposed to be covered with Grout. There are 2 ways to do this. I see many make this mistake.. Also, isn't it interesting the City has a detail for a 6'- 6" wall and actually 10 courses = 6'-8" .
4"s is below grade
Was the part where the block cells were filled with concrete where the vertical rebars were get made?
I missed that footage
Good job,is better to put rebars or fibra for a patio of concrete for a BBQ 12x12 ?
About the same
I like this job nice and accurately being done. An other Pete Nelson!
I'm confused about the vertical rebar- you mention the 2ft overlap, but why don't I see the verticals protruding up through the courses? Don't you have to tie the verticals together and also tie them into the bond beam?
Always love these videos- straightforward and professional..
overlap is at the bottom where you cant see it
Nice Job🖒🖒 and in a few days happy new year🍾🍻😊
Yes and TY
When we build with block the horizontal rebars are grouted before the next row of blocks are set.
Its stronger on a single pour with no cold joints
good video and nice work....
TY
You are right, they should’ve stuck with the correct caps. That top lineup is making my eyes bleed. Other than that, awesome group, awesome job and solid video man. 🤙🏽
ty
when the grout is placed in the vertical cells wont the hanging rebar just move to the side of the cell and compromise the vertical rebar lap??
No
Good job
TY
You welcome
Nice work but Where are expansion joints?
No need under 30'
Why rebar cells are not grouted . Pls tell me the reason.
they are I just didnt film that part
A question why you use the wire mash on the courses
Because it's required through the City
Odell, at 7:15 the workers are laying what looks like a mesh screen over the course of block. What is that purpose? What does it do?
Grout stop, So that we only fill the cells that have rebar and a continuous bond beam on top
When you wet set the bottom row: that bottom row doesn't need mortar joints? Is there not any risk of the blocks moving and becoming unlevel in wet cement then making your whole wall off?
no this is the best way
hi Mister , I call from Brasil , can you give-me a link were I can get a TABLE of foundations types that you show in the video ? thanks a lot for your videos that help-me a lot to learn.
Which ones?
i want to put a tile of some kind to make my side look pretty . is that possible?
yes
@@OdellCompleteConcrete thank you.
How much?
Can you say how expensive was that wall?....if not I understand.....
5000
Team Odell, thanks for another quality video. The block leads looked great; did you use a trig block to hold your stringline, or shove a concrete nail into wet mortar to hold the line across the two leads? Thanks, Matt in Ohio
TY
Trig
Have ever done any concrete work up north where you have to worry about frost?
no
If you were attempting to build a slab and block wall pool, what would you do differently from what's in this video?
I wouldn't do it unless it was for a liner
@@OdellCompleteConcrete So poured solid skimmed out and tile is no good?
Hello Dave,
Thank you very much for the content. I'm aspiring to build a brick privacy wall. Do you mind sharing from where you pulled the foundation measurements? Some type of manual?
kind regards,
In the middle of the houses and where the old fence was
@@OdellCompleteConcrete Thank you for answer but I meant more in regards to how wide and deep the foundation needs to be to support x height and x block types. Also choosing between the different rebar patterns.
great work, What's this white mesh? What is its function? thank you
Grout stop.
Prevent concrete from going where you dont want it to
We are a hollow block manufacturer company located in Turkey and I will recommend your video to our customers. They ask for the width of hollow blocks that are the most suitable for their country.
what is the width of these blocks? 8 inches?
6 8 16
@@OdellCompleteConcrete It is a standard size. we are machine manufacturers that produce these blocks.
you may find my channel very interesting. It may give you some business ideas as well.
I never had a concrete guy lay out my wall and lay the first course! But it would be nice ha
Its much stronger
I thought standard block was 8x8x16. They make 6x8x16?
Do you fill with concrete the hollows where the verticals and horizontal rebar go?
Yes
The moddle horizontal
OSS
Whats the downside if you grouted every cell? I thought it was code to tie in the bottom verts to the verts that extend to top of wall.
The cap has no steel in it.
Possibly the weight to footing
The only time you solid grout a wall is if it's a retaining wall or a building and yes everywhere you need to tie your laps.
David you were showing the horizontal rebar about 5 to 6 feet and were holding your hand way over your head. Didn’t realize you were so vertically challenged! Lol,
Yes I'm afraid so
Nice job. Looks great. How much do you charge a roundabout tour job like that?
5000
is more details of this project (like grout pour) in the patreon channel?
I wish
Do you have the contact info for these guys. I need a block wall built on my property.
I wish
Good look Mike, I dont thinl Odell will share information with anyone. Ive call for estimate and they don't even have the Courtesy to call back. I guess they have too much work. You would think they would share some information.
You need to upload more block videos maybe a how to lay block like a Mason with tios and tricks lol
sure
I know this is an old video, maybe you are still around, maybe not...I noticed in the video around 6:40 time stamp that as the guy is laying the blocks coming toward the camera he appears to be putting in a single upside down bond beam block every third block. You can see them in the staged blocks as well on the ground. What is the purpose of this?
Allows for horizontal steel and concrete along one course of the wall and tied in to the verticals
@@OdellCompleteConcrete Thank you very much for the quick reply. However, I am not referring to the bond beam. The guy is laying one block upside down with the knockouts, then two regular blocks then repeats. There is no steel there and no mesh or anything. I was just wondering if this is done to give some small amount of horizontal grout fill spread from the vertical cell fills every so often just for added structure or maybe he was just using up extra bond blocks or something.
I see your not using dura wire in the bed joints. Is that per code, to not use it?
That's for 4" walls
How much did this project cost it?
5500
How much does a job like that cost? Permits and everything included?
7500
Dont u need to fill whit concrete the midle row of block where the rebar goes
It all gets filled at one time
what was the cost of the wall . Has to be the most expensive of all the wall choices
5000
Are you not able to build 4x8x16 block wall because of city code ? Just curious
cant build a 4" wall by code
They are fast.
TY
did you make a concrete foundation to build on or just go off the ground...
Yes foundation is needed. Its in another video
How you design the height of your beams
We follow the drawing from the City
Why is the construction of a wall so regulated by law?
3 inspections to build a wall on your own land....
Earthquake codes.
Its a liability issue, I'm guessing
@@johnoliveras9672 I mean, that, its bullshit when you have to have 3 controls of a wall that will only work as a border, imo it should be less strict and shouldnt be so over engineered
@@igi5016 - If you lived in earthquake country, you would know. Un-reinforced walls have been known to collapse during an earthquake. Rightfully, it's an issue of safety.
so thats sumone elses house on the other side of that wall? if it is thas messed up
A garage
So what’s the cost for something like this. Do it yourself price and pro. If u don’t mind
5000 or 3500
😊
OSS
hello friend I have some doubts the small metales of the foundation are with the long vertical metal? And you add cement where there is a metal?
OSS
@@OdellCompleteConcrete what you mean?
We don't have walls like that around where I live. I'm curious about how much that cost? Also can add like cut up broken glass on top or is that outlawed in CA too?
sounds outlawed
Wow, broken glass?
@@doloresm7396 Sure why not, colored glass looks nicer than razor wire plus it gives the asshole fence jumpers a little souvenir. It was popular in South America.
A wall sappose to be solid and not hollow my friend.. all holes sappose to be poured, just like the Bond Beam on top...
OSS
Finally. A wall.
OSS
how much for a 50 ft wall
5000
About how much does that wall cost the owner? I’m looking into having one built.
5000
these videos are great for educational purposes. But i am one of those people who would over engineer things if that is how the expression goes....vapour barrier at the bottom....alot of rebar....concrete everywhere...would probably make a good engineer.
I would make things alot more expensive than necessary lol
solid
OSS 😎
OSS
@@OdellCompleteConcrete OH! Yeah!
What happens if you fill each hole with cement (even the holds without steal). Why is that bad...I'd think it would make the wall stronger...no?
Not engineered that way, so I would think the footing may not be able to hold the weight as well.
@@OdellCompleteConcrete I see, that makes sense! Thanks for your reply.
In aus we go to great lengths to ensure every block is filled with concrete but with a bigger footing. Like inspector has to see the concrete in the bottom blocks so first course Is laid with blocks that have cutouts so you can hose out mortar at the end of each day
Then you form the cutouts to pour concrete from top course
Next day form come off and it’s easy to see if concrete has flowed down
Awesome videos by the way, I really enjoy them and u really know your stuff. So thanks for sharing that. Love seeing the different methods used in different countries
Hmmm, CA doesn't have issues with walls between yards but not along border....
Interesting agenda
California has a border wall and frankly don't mind it. What they don't want is an investment in the Great Wall of China 2. I could hop this wall in a single jump. Donald wants a wall so tall you need to buy a 40 foot ladder first... which is available at a hardware store 20 miles from the current border.
Le travail est très bien fait !
Mais quelle tristesse ce mur près de la maison !!!
.
The work is very well done!
But how sad this wall near the house !!!
garage
OK !
fine tuned? you need to get around more
Good idea
👌🏻
TY
Is the wall hollow, no concrete fill?
It gets filled where steel occurs
Could someone share this with Donald?
sure
No 4
👍
OSS
Ive always wondered... what is OSS