@@XioXueiflux is made of rosin.... It's the orange ish yellow liquid that facilitates heat transfer... The silver "wire" is solder... I personally prefer lead solder the tin as it has a lower melting point and is easier to work with
amazingly neat work. I have one single line in a camcorder connector to fix with thicker lines than you have. Failed so far. I dont have the microscope or the skills so far.
Is it possible to use other lcd flex to connect the original lcd flex? Please answer my question I badly need your answer what I mean I will cut off the class A lcd flex then I will use it to original lcd flex? Did you get what I mean?
Hey man is lcd flex can transfer to another lcd flex like I will use the lcd flex of class A lcd and transfer to original lcd? What I mean is Swap lcd flex?
Is there a chance to fix lcd flex cable the pin on my flex cable lcd has been burned 😭😭 same as the mother board is there a chance to repair that 😭😭😭 pleasee help me But I can open my cellphone but can't touch the screen.
भाई अपने जैसे करके इसे जोड़ा है तो ऐसे अगर मेरे पास जो था वह टूट गया था उसे पूरा गायब हो गया था उसका अगर हम उसे चाय पीकर तार लगाए तो कैसे उसका टुकड़ा ना हो तो उसको तार कैसे लगाया जाता है वैसे की मौलिक अधिकार होता है ना उसे कैसे लगाई जाए उसके बारे में बताइए
You are incredibly skilled!
Cool repair! What is the green coating you used at the end? Solder mask?
UV Cured Glue
Better than perfect 👍
Lack of info on what you use to fix it
Solder iron , solder , copper wick , solder flux, tape
you forgot about the microscope, needle/scratching stick and extreme precision hands
@@Currmygold69 Does the flux used contain solder tin or is the small wire that connects it solder tin?
@@XioXueiflux is made of rosin.... It's the orange ish yellow liquid that facilitates heat transfer... The silver "wire" is solder... I personally prefer lead solder the tin as it has a lower melting point and is easier to work with
its not solder. it is enameled magnet wire.
Thanks for the video. Which tool do you use to peel off the cable?
amazingly neat work. I have one single line in a camcorder connector to fix with thicker lines than you have. Failed so far. I dont have the microscope or the skills so far.
You have to learn these World Class skills from Indian Gurus😊.
Good involvement and dedication
High precision work
I’ve done this to a laptop display flex cable before, and it’s only worth it if the part replacement is super explosive or hard to find😅😅
do you know, if there is a replacement ribbon cable for the ags 001 ? can it be replaced, insted of the whole screen ?
Thank you bro you just fixed my tablet
I have the skills ...not the eyes ...LOL
magnification
What tools do you use to clean insulation?
It could be a fibre glass brush
Very Impressive
Thanks for this video. I have the skills and the microscope and have the tracks ready to solder together. Can I ask what wire you used.
0.009 or 0.007
Location for the repair
What’s d green substance at d end?
UV cured ink for isolation
@@yutianshui255 ok. Thanks! :)
Can broken tiny leads be detected visualy in flex cables?
This is like human body operation to the doctor
What is the name of blue gum?
Is it possible to use other lcd flex to connect the original lcd flex? Please answer my question I badly need your answer what I mean I will cut off the class A lcd flex then I will use it to original lcd flex? Did you get what I mean?
Can we use any flux?
Is it possible to replace the flex cable of a touch screen?
What did you use to scratch off the sealing
Cutter
At what magnification was it repaired?
3x. You almost need jewelers magnification goggle glasses like what Rolex watch repair needs.
Hey man is lcd flex can transfer to another lcd flex like I will use the lcd flex of class A lcd and transfer to original lcd? What I mean is Swap lcd flex?
Con que lo raspaste o lijaste amigo
Assalamualaikum apa nama bahan2 yang digunakan untuk sambung ribbon ni ye ?
What did you put on the cable at the very end of the video?
Appears to be glue/epoxy that is cured by UV light.
Needed to check for connectivity with a multimeter to verify functionality. Amateur mistake.
Do you take in repairs? Like mail-in. I need a flex cable repaired and I was wondering if you can help. thank you!
😮 would this also help if you wanted to extend the cables say for instance trying to place it internals of a phone inside of a mask,???
What kind of metal are you using?
And what do you use to clean the cable before you began soldering?
I really need you to attach a flex cable I ripped by accident 😆
Is there a chance to fix lcd flex cable the pin on my flex cable lcd has been burned 😭😭 same as the mother board is there a chance to repair that 😭😭😭 pleasee help me
But I can open my cellphone but can't touch the screen.
Como se llama el liquido verde que le ponen despues de soldar
. Cómo se llama?
Can we replace with white ribbon cable with same no of pins
Wow. What is the green glue stuff??
It's solder mask, dries with UV light ensures the traces can't touch (assuming they aren't)
to: @@marksutherland774 (THX 😇)
Is it gum u first put
Hi, i would like to ask if you are fixing for others too?
Prática bem sucedida
Mere iphone 6s ke camera ka flex cable cut hogya vo repair ho sakta h kya
Hello Sir I An Facing Same Problem But Ships Near Me Telling It Has No Solution You Have To Change The Folder Please Tell Me Solution Please Help
Where you from?
Which soldering iron to use
Location
Would have been nicer if u tested it for us to know it worked
Bhai mere phonr ka aage wala connect karne wala tut gya he kya karu
Location sir?
Oppo A12 ribbon paltano jaibi
Itu bsa dipake ngga?
भाई अपने जैसे करके इसे जोड़ा है तो ऐसे अगर मेरे पास जो था वह टूट गया था उसे पूरा गायब हो गया था उसका अगर हम उसे चाय पीकर तार लगाए तो कैसे उसका टुकड़ा ना हो तो उसको तार कैसे लगाया जाता है वैसे की मौलिक अधिकार होता है ना उसे कैसे लगाई जाए उसके बारे में बताइए
Bro yavuru
You forgot back soldering 😂😂😂😂😂😂😂
no need
Limb transplants be like:
Which tweezer you're using. ? I think it's self locking tweezer?
What's you location
Anybody gonna name the skinny wires used?
Jumper wire 0.5mm, 0.9 mm.....
Master
your location helu
damn I didn't need to get flexed on like that
Today I damaged a cable... Now the touchscreen of my car head unit is not working.
Same. Did the heat soften the glue and the whole touchscreen fell off?
This is my nightmare
Lol😂😂😂😂 but the question is? is it work?? 😂😂😂
100% it will work
Will it work*
Does* will*
cost 1000 dollar ! for work ;-)
U joined it together, but u not joined the connections… how does the signal travel…. This video nott true guys😂😂
Poor comment