Cobweb-Shooters (Evaporation Web-Fluid)
HTML-код
- Опубликовано: 2 окт 2024
- These webs aren't strong at all, but they sure do look cool! The web-shooters are compatible with soluble polymer solutions that have a room temperature evaporating solvent. I have played with them in the past, and if synthesized correctly they can create long floating strands of polymer chains.
I used 3ml glass spray bottles for the web-shooter cartridges. They are small, but can contain enough fluid for about 20 sprays of webs.
Checkout my styrofoam web-fluid video to see more: • Polystyrene Web-Fluid?
Previous Evaporation web-shooter: • Evaporation Web-Shooter
Channels to checkout:
The Amazing - / theamazingyt
The Blood-Spider - / thebloodspider
Spider-Slinger does a lot of work with evaporation fluids check him out: ...
Music: Spiderman Theme Remake - Cover [ No Copyright ] __ Soundtrack Movie
Where can we make the web fluid?
ruclips.net/video/WuWJLus_YLg/видео.htmlsi=okWRdmKwr2zm_EVr
@@TheHumanSpideri am an animatronic engineer and am trying to create an pneumatic animatronic jumping spider, i want it to spray webs like this at the end of each action, no matter where i go or what i try i cant seem to create a skin contact safe cobweb spray, if you or anyone can help i’d greatly appreciate it, i dont even care if it looks dumb, the furthest ive gotten is soapy water
@@TheHumanSpider Do you have files to 3D print the web shooters?
@l3renn9n Man imma be honest with you, it's pretty difficult to make such web fluid which will not cause irritation on the skin when it's shot out, You can use,
A) Butanone and Dissolve polystyrene (But Butanone causes irritation
B) Polyvinyl Acetate and Dissolve Polystyrene (But Acetate Is Acetone which causes less irritation but still causes it)
C) Loctite Adhesive spray, but again it's an adhesive so it'll stick to people causing difficulties.
You really don't got a choice mate, you can make a Web using nylon and connect them and put it in the spider animatronic. Other than that idk what to do.
Good luck with your adventure
What would be cool would to add spinnerets to it and when those string forms when make contact with air it can spin itself into a string.
Is it possible ?
@@Athi-_-San I think so with the right psi and nozzle, most likely have to strengthen the fluid though so it doesn't go mist effect,
idk just a educated guess really
@@harrylovelock-brown34 thats pretty much what i was thinking
@@Athi-_-San i think is could be possible there are alot of factors to think of such as the speed at which the spinnerets could be spinning to fast the string could break to slow it wont form a proper string also how big the motor got to be to spin the spinnerets. I was thinking of a formula that might be used and if the science is correct this formula can be as strong as kevlar which is still not as strong as spider silk but if you have spinnerets its can form a strong enough string that at least 3 to four millimeters can hold or support 900 pounds.
@@Athi-_-San it wouldn’t be as small as you’d imagine, for that to remotely work, you’d need a coil and motor from an impact driver as well as enough power to charge it
Nicely done! I think this definitely wins the best-looking IRL webs award so far :)
This is actually the closest thing I've ever seen to a real web-shooter. If you keep going you could make the real thing. Keep it up!
That model looks amazing. The sliding lever mechanism is perfect for keep your design sleek and concise.
We are waiting for your part 2 project too ben :)
Hi ben! Do u know when your next video is coming out
@@abacombos2494 soon
👍
@@BenRebuilt yo awesome web grappler it was awesome but I think if I jumped off a building and tried to use it my arms would get ripped out and I would die
The fact that these web shooters are capable of mounting different cartridge types is incredible. Awesome work.
Do you have bgmi
@@santoshramoul380 I’m not sure what that is
@@anonymouss.2158 he's talking about the battle royale game, probably a kid asking randoms on the internet
@@mayankmahasuri6766 Ha you're right
@@anonymouss.2158 Battlegrounds Mobile India
Basically the Indian version of Pubg(since it was banned so they relaunched Pubg again as BGMI)
God damn thats a beautiful design!
Yooo symbiotehost! I’m a big fan and subscriber
Pls do a tutorial on this web fluid and web shooter!🥺
yes please do it!!
strictly concealed by Oscorp
😃
Already did I'm pretty sure
One of the best thing about this dude is that he never give all credit to himself!
the most realistic web shooter out there. love this video.
Yup!
Now you just need to make the webs strong enough to keep a battle ship from ripping apart
😂
Give this guy about 6-10 years and you might just see him swinging around the city. Fr man that is very cool keep up the good work
You won’t see him do that. It’s physically impossible. He would need superhuman strength
@@levon5312 bro ik i was just making a joke 💀
@@levon5312 Imagination issue.
Looks Fantastic! Love it! Could you make a longer demonstration?
Yea do some “dude perfect “ trick shots 🤙
I love how he managed to make it look identic to real webbing instead of using lazy ropes like 99.9% of people who do this kind of stuff
The "lazy ropes" are people who want to swing from the web, as cool as this looks it has no strength
Whatever doesn't involve insane chemistry are "lazy ropes"!? The nerve!
A cool side project would be to add a rotating nosel that spins the web fluid into a strand instead of a parachute like shape. Although the shooter might be a little bulky
Not really if u add a miniature rotor and a mini lithium battery you should make it compact and efficient
Out of all the web shooters I’ve seen this is the best one Can you post a video on how to make the web shooter? Please
He printed it
Printing the base then adding that cartridge which is a little spray bottle then he made a hole on top then he made the fluid and added it inside the cartridge and then boom
@@TheBoogeyMan. thank you
@@nitsan5656 thanks
@@TheBoogeyMan. but like how do you print it? Like can I go to a shop or something?
sucks that people think you stole this from a brazilian youtuber. love the web-shooter btw!
Stop being a kid. hate just make more hate
For anyone wondering.. no this is not “Real webshooter” or “webshooter” the Brazilian channels formula or type of shooters. That guy stole the fluid from human spider, and stole shooter designs from spider slinger. DO NOT WATCH THAT CHANNEL!! It is a fake and one of the big reasons why the big guys are buried in the algorithm.
When will you uplode your new video
The brazilian guy just make for the people that cant pay for a webshooter, stop hating him. He is just a boy helping people, that is a superhero thing.
Btw how tf this guy is a fake??? Shut tf up, Dream is not a fake just by the stans
Bro, thats so stupid, he started to make webshooters first than you, and you call him a fake? Grow my boy, fkn grow.
@@EduardoSouza-co7mf Counter his points then. He says he stole the web fluid formula from the human spider.
you ARE spider man
Great job and please keep posting awesome stuff
Very nice, has a satisfying look.
Yooo U here too?
@@devduthk3816 yep you know it
It's crazy to me how we actually have real working web-shooters because all we'd need is strong enough fluid and soon we'll have mofos swinging around like Spidey himself
It’s good to see that you are posting again it would be really cool if you were to reinforce the webs to where it could withstand more force or hold more weight
Grande perfeccionando la tecnica y mostrandonos como a nosotros tambien
I have tested using the spray bottle to make a webshooter it works really well I was gonna put it on RUclips but you beat me to it lol
Bro ,what formula did you use to make it? I would like to do it as well😅
@@anthonydrablow7964Update bro? I wanna make one
The legend is back
You are getting closer. That is epic
Ayyyy this is epic dude! My dream of becoming Spider-Man is coming true!
But also how did you male the cobweb fluid tho-
El lo fabricó
If these come to market i bet these are going to sell like Crazy! I'm not sure about new generation but the 90's-till-02 kids for sure
Amazingg!!! Would you ever release the formula? Spider slinger never did :(
Bro he literally added all the information and stuff about the fluid in the description, lol.
@@flow_987 Pretty sure it's a false lead. I tried it from scratch.
@@propsandheroes lol the man basically spells it out in the links.. 'Mix MEK with Styrofoam until the viscosity is similar to water'
Shoot the mixture out of a spray bottle yo disperse the fluid across a larger surface area in room temperature. u get cobwebs. Acetone dies not work
Mek is like 20 to 30 bucks on Amazon. I tried and it works as shown in the video.
Edit: mek is dangerous tho so wear gloves and don't inhale this shit
@@flow_987 Im talking about his Polyvinyl Alcohol notes. I made a 20% solution (very concentrated) and it did not work.
@@propsandheroes honestly I don't know much Chem so I have no clue why ur thing didn't work. But what I do know is that mixing MEK and styrofoam,, then shooting it out of a spray, works. I know cuz I tried it
I wouldn't be surprised if one day you were the real spider-man
You are amazing
3 minutes later:
Who will be this real life spiderman?
Sony: Claimable
Us: : v
Could you eventually release a diy video of this formula or one similar to it like how you did with the silly string formula? That seriously would be awesome
Fabric tac and acetone! Is the formula
@@schofrenzy3444do u have to add water?
@@schofrenzy3444im going to try it
@@schofrenzy3444how do you know??
@@bingbangasiancause I helped create it 😉
If the viscosity of the fluid is close to water, you could use the pressure of it to spin a turbine that uses small spinnerets to weave a stronger web
Hope you'll upload step by step how you do this!!
And so, the chemical composition of this web is simple. You need acetone ordinary and transparent glue, add glue to the jar, then acetone and then mix this consistency, and then add it to such a balloon as shown in the video and spray it out and voila everything is ready)))
Bro have You tried it? I would like to do it by My own
@@anthonydrablow7964 Yes, I tried it a long time ago, it worked.
@@asedy7910 Ohh thanks, but when You sprayed the formula, it went to far as in the video? Because this guy when sprays it goes like 3 or 4 meters
@@anthonydrablow7964 Well, it all depends on what kind of spray can you have, I was making a web shooter, and I took some kind of spray can into my nose, it shot far, I had 2-2.50 meters + -, it all depends on the can rather Total
@@asedy7910 Oh ok, sorry for being bothering You 😂, but i got a final question, what kind of transparent glue did you use? Like what brand
Since I don't have a 3D printer and I can't do anything myself, I would like to ask how much it would cost to buy such net launchers without 3ml bottles?
www.etsy.com/shop/HumanSpiderDesigns?ref=dashboard-header
@@TheHumanSpider how did you get the spray to come out of the top? just drill a hole on top and cover the common, or create a mechanism?
@@Neobr41how's the update did you make one?
@@Neobr41i usually use a nail and a hammer, pretty affective but be careful
200 or actually 228$ on Etsy their so expensive 😩
Cobweb shooters are a million times better than these overrated string shooters everybody be makin. Idk why they get so many views while people who actually make fluid go unnoticed.
It’s honestly not that hard. You can find the materials for all of my fluids on Amazon or hardware stores like Home Depot. I wouldn’t say 99% of people don’t have access to that
@@TheHumanSpider can u provide a link to the spray bottles
You can just buy some spray bottles at a Walmart or a dollar store. No need for buying those online
@@phantom_0662
It’s always a blessing when you upload thank you
They look awesome good job dude🤙🏾
This is really cool bro
Sell it or how do you make it???
Hey Human spider, I want to engineer this kind of spiderman tech too but I have zero experience, where should I begin.
Begin with the Amazing’s channel
ruclips.net/user/theAmazingYT
This is amazing!
I really like the video, but it would be better if you could probably give the formula out of how to make the web because I'm been trying ages to make my own one but I can't. So is it fine if you can give the web formula please, I would really appreciate.
That is so damn cool nice job!!
Wow it's super cool
Please make a video with the exact web-fluid production process
Finialy our new spiderman in our world
now we just have to make the web fluid more stickier and stronger
AND DONE
REAL LIFE SPIDERMAN WEB SHOOTERS
Nice Man!!! u got heart kid.... finally someone can make a legit shooter like me
Well, in the future if we ever see a vigilante crime fighting Spider-Man, we know who it is.
Hello, I am a child who really likes Spider-Man. Webshooter is really cool. Can I purchase it? I looked for it and all I found was a device that fired plastic bullets.
I would appreciate it if you could reply.
I'm living in Korea. I'm not good at English, so I used a translator.
This is incredible. I would definitely buy one of these
Hey I have a question for you...
Can you make a web shooter that is flat and can totally adjust to the wrist?
I mean can make the glass-spray bottle flat as well as it's holder of the shooter ?
Or make a web shooter from avengers infinity war the homecoming one it can just expand on you wrist . (Avengers infinity war school bus scene.)
this kind of webbing can be used for fighting like you just shoot them in the face and it distracts them
This is so cool!
Yo I’m sorry to ask this again your prolly not gonna respond but do you have a template to make the 3d design of the webshooters
Can i buy this
Yes
Oh hell yes!! Good morning!!!
It would be so cool if you can shoot inpack webbing yeah it would only have like 1 shot with each canister but it would be awesome as hell
like i commented before. Higher pressure and rifling at the end so it goes straight at those pressures would help it out a lot. if it became more solid the more its stretched then it would do good for its strenght and the spin from the rifling would make it a proper "rope" that is less likely to fall apart like some yarn
do you just release the atomizer and it looks like this or something else?
If somehow we will be able to make that web strong then we may be able to swing 🔥
It would be great if you showed us how to make it
This is awesome as always I hope your videos reach more people
Web fluid?
This is the first time I’ve seen a web shooter shoot actual webs
teach you how to do it all
THATS SOOO COOL MEN!!!
If you can manage to shoot more spider silk, and add a twist mechanism to the tip of the shooter you might have a better result.
Could you make a tutorial how to make evaporating web fluid?
Do Full video how to do that web shooters and fluid
Can you please do a tutorial on how to make the evaporation web fluid?? I'm thinking of make one of these...
Fabric tac acetone to make web formula thx me later
The hardware is weighty and the ability the trigger to fold up just makes it cooler! Just wonder if theres a way to make synthetic web fluid that uses the concept of hot glue, but it’s got more tensile strength, wider spread and good adhesion! Im just 14 but im aiming to be an engineer :)
I’m about to be 14 and I’m aiming to be a engineer aswell or robotic engineer
I guess me too
Go tutorial please
That is just Thermocol plus acetone...😍
THIS IS MY KINGDOM COME
What would happen if you tried to add nylon to this? I’d like to think it’d give it some extra strength but I’m definitely not a chemist.
It would explode and the FBI would be at my door!
Lol in all seriousness nylon isn’t soluble in most of the solvents I use for my room temp evaporation fluids. I recommend checking out a channel called the.Amazing he has some educational videos on webfluid chemistry
Aaah alright, thanks you two, been a long time fan!
Maybe it's not good enough to swing but good enough to throw web at faces
missing link people dont understand about the shooters is the nozzle. you cant have a web cable in the current state its in as shown you cant have a floaty web-string. but if something were to twind the web coming out of multiple nozzles and binding them into a good enough solid rope to attached , grip and swing from or lasso something. You might just have the basic design to shoot already, but still needs to be tweaked
That’s pretty cool, I made a gun.
Awesome, is there a reason you haven't thrown the fluid formula up on Patreon? I'm sure it would net ya a few extra 👀
Wait a min... Isn't the fluid literally on the video?
Are u sure those are 3 ml spray bottles? they look like they are 2 ml
Add more pressure and it will be great
In fight you can use this and shoot opponent in eyes
How much would I have to pay u to get those
tell me the composition of the web I need it please tell me I want to do it
Please make a tutorial explaining how to make to push concept for the spray bottle
And they said JLaser made the most realistic web shooter🤦♂️🤦♂️
Thanks now I can swing threw New York City and fight villains
OMG 😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱!
Can you teach how can I make this
I love it
I wish I had his file this is amazing
Someday...
Someday one of us will finally be a Hero, maybe Spider-Man...
If you see this, could you please tell me what type and size screws that you used for this.
I got the files from your Patreon, I just need to know what type of screws to use.
If you can make the mixture of water and formula with carbon nanotubes L make a fine web fluid.
add spinnerets to evaporation web shooter and tensile strength to the formula like some thing that bonds hard together after the heat from the coil is applied to it to try and make plausible string
Dude, I appreciate what u created. But can u pls make a web shooter that shoots a solid liquid web line that is strong enough to carry objects(pls!)
Dumb request