How to bleed a cars Engine Coolant System
HTML-код
- Опубликовано: 11 фев 2025
- here we demonstrate how we bleed the engine cooling system on this Ford Focus 1.0 ecoboost
the customer had a split holes which we had replaced and he had lost his coolant.
signs you have air in your system are pressure from the reservoir when you open the cap.
bubbling sound coming from inside the dashboard
hot heaters not working inside the car / cold air not getting warm.
temperature gauge fluctuating between hot and cold.
I wish I found you weeks ago lol. Watched 2 videos. I’ll be back for any car trouble car solutions. thank you
Funnel and tape trick / screw driver = genius
Thank you
Mk3 focus, hold the ok button on the left of the steering wheel and turn to position 2 on the ignitio, hold for 10 seconds and you will get test mode on the screen, them you can use the direction button and go to engine temp, it will give you the exact readout in degrees, good for also checking battery and alternator and fuel rate etc
DEFO THE BEST CHANNEL ON YT
🚗🚗🚗🚗🚗🚗🚗🚗
hi,i have a 2009 ford fiesta 1.6 tdci,i changed the thermostat in it today,i put coolant in there run it for over an hour,top rad pipe is hot,heaters are blowing hot but my rad and bottom rad pipe is cold,the water in the water bottle is getting hot but doesnt look like its circulating,when i take water bottle cap off there is no pressure,been on it today for about 5 hours and can't get the rad or bottom rad pipe hot,,,please any ideas,i was told it could be water pump?but i dont have any noise coming from water pump or any leaks,thanks in advance,jon
Do you take out the excess coolant when done? 9:45
Nice video. Love the screwdriver trick, I've been making a mess all this time lol oops 🤦🏻
Thank you
My car has constant bubbles and fan at radiator won’t kick in
could be a bad thermostat
@@filipsdomain I replaced the thermostat and the housing they come as 1
Fantastic video
Thank you
Fantastic
Good video
I replaced the thermostat and the temperature on the guage wouldn't go all the way to 90. It's about 82 degrees. It used to show 90 but now it doesn't 😂😂
Wow