Using A Fixture On The Small Mill

Taken from "Making a Watchmaker's Faceplate for the Sherline Lathe - Part 2" - • Watchmaking - Making a...
(Amazon Affiliate links to items used in this video)
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Books:
"Solidworks 2013 Bible": amzn.to/2FObS1D
"Machinery's handbook": amzn.to/2pi7XE5
"Drills, Taps and Dies", Tubal Cain: amzn.to/3wUFNA7
"Hardening, Tempering & Heat Treatment", Tubal Cain: amzn.to/2IdTQLw
Tools & Shop Products:
Sherline Lathe: amzn.to/2pnXM19
Sherline WW collets: amzn.to/2FYZ7F8
Optivisor Headband Magnifier: amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: amzn.to/2tTEPb0
Saint Gobain (Norton) - 4 Arkansas Stones + case: amzn.to/2HCOAMX
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/2EArNRU
Interapid Dial Test Indicator: amzn.to/2FPInwH
Saint Gobain (Norton) - 4 Arkansas Stones + case: amzn.to/2HCOAMX
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2" 120 Degree 5 Pc Set CNC Machine: amzn.to/2G7ylv6
Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand: amzn.to/2PkyoTV
Proxxon 37172 Micro Band Saw MBS/E: amzn.to/2ONORR1
Anytime Tools Angle Block Set 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30° Precision +/- 20 Seconds, Machinist Tool, 10 Piece Set: amzn.to/2QFqM2Y

[@AtlasReburdened]

Your spatial reasoning never ceases to amaze. If someone tasked me with make such a perfect circular to flat transition on a piece, it would probably take me embarrasingly long to figure out how to do it.

[@kBIT01]

I don't know why it never occurred to me that a 2MT collet adaptor would fit in a rotary table, but that's an awesome trick. I bet that would be awesome with the foot stock.

[@albertrasch4793]

Lovely precision work. It takes a highly refined and disciplined mind to create as you do. And your passion for your work is evident in all you do! I for one appreciate the time and energy you use to create these wonderful vignettes of your work, and your full length videos as well. Bravo man, bravo!

[@russ4570]

there is not one single vid that you release that doesn't blow me away.

[@cd23]

The planning and skill of this craft is amazing. I would love to be able to make parts like this and videos as well.

[@hyperglobalmegadude]

Super awesome how you always get the CAD rendering perfectly lined up with the real part!

[@anthonystrunk5360]

Excellent setup!

[@markmiller6817]

Nice work , you are good .

[@Chr.U.Cas2216]

👍👌👏 again and as always.

[@Internet-Antics]

Wow. I want to be this good some day!

[@thomasrogers8239]

I'm not saying clickspring isn't good, he's really, really good and discusses how difficult things are, but remember this is social media, a lot of the prep work and failures just don't make it into the video.

[@10868940ih]

Best time to start is 20 years ago. Next best time to start is today!

[@Alien-Enemy]

Волшебник какой😮

[@billmckillip1561]

Inspiring work.

[@Bristoll170]

...Clever.....VERY very cleaver.... 👍

[@upinmyglider]

Next up Zaratsu!

[@twagenknecht]

⛓

[@mxcollin95]

Beautiful part but what is it?

[@624Dudley]

It’s one of a set of clamps for a watchmaker’s faceplate.

[@mxcollin95]

@@624Dudley thanks for answering my question! 👍

[@jeffarmstrong1308]

Slight cringe at the carbide dust from the wet 'n' dry at the end.
Funny that I never noticed it in the full length video.

[@n8guy]

I was wondering about that. You're supposed to keep it away from the mill (and specifically, the ways), right?