Thank you for doing this. Im working on a husquvarna 150BT basically same build had to replace piston and rings messed first set of rings up trying to fit cylinder back on with blower attached. I will take the motor off the blower and do what you did to compress the rings down to get the cylinder back on. Thanks
What did you use to remove the crank bearings and install them? I’m working on a echo Srm - 280t that needs new crank bearings and seals it had no compression when I got it. I already have new piston and cylinder for it
Nice save! I have a Redmax EB6200 that was working great, until the end of last year... It's 25 years old, but still in good shape... I've tried everything so far to get it going again, and decided it seems like the crank seals may have worn out and started letting air in through the bottom end... It will fire off starting fluid if sprayed right into the spark plug hole, but not anywhere else(like the carb or intake), and it doesn't seem to be sucking gas out of the carb, through the intake, because of that... Is there a good place to find the correct parts? I'd really like to get it working again!!! Thanks in advance!
Where might a guy get the 3 prong driver to adjust factory walbro carbs. I've been looking for one for a while now an have yet to find one. Hopefully someone might have a little bit of info on that would be greatly appreciated!
I am really enjoying this channel since coming across it a few weeks ago. You do a great job at the visual and verbal explanations.👍👍
Nice work, sir. Thanks
Thank you for doing this. Im working on a husquvarna 150BT basically same build had to replace piston and rings messed first set of rings up trying to fit cylinder back on with blower attached. I will take the motor off the blower and do what you did to compress the rings down to get the cylinder back on. Thanks
Fabulous video, I use a thread locker when tightening cylinder bolts. Engine mount etc
Well done, you know what your doing, that’s for sure
Mix of acetone and automatic transmission fluid makes a good penetrating fluid too.
How did you get the crank out?
How do you press it together?
Looks like you have done this a few times 😃
What did you use to remove the crank bearings and install them? I’m working on a echo Srm - 280t that needs new crank bearings and seals it had no compression when I got it. I already have new piston and cylinder for it
M12 Milwaukee and m18 all I use stubby is life changer anything small engine
Nice save! I have a Redmax EB6200 that was working great, until the end of last year... It's 25 years old, but still in good shape... I've tried everything so far to get it going again, and decided it seems like the crank seals may have worn out and started letting air in through the bottom end... It will fire off starting fluid if sprayed right into the spark plug hole, but not anywhere else(like the carb or intake), and it doesn't seem to be sucking gas out of the carb, through the intake, because of that... Is there a good place to find the correct parts? I'd really like to get it working again!!! Thanks in advance!
Quick question i cant break the fan bolts it keeps spinning how can i do it please help
Where might a guy get the 3 prong driver to adjust factory walbro carbs. I've been looking for one for a while now an have yet to find one. Hopefully someone might have a little bit of info on that would be greatly appreciated!
I keep my blower in the rain.