Exact same problem. Fixed my issue instantly!!! Ten stars!!!!! I ordered a new starter. Thank goodness it wasn’t shipped yet. Went from ordering a $300 starter to a .30c fuse.
Hey I’m having same issue I changed my starter alternator and ignition comes on and I have power but it won’t start what’s the fuse name and where can I buy it from ?
Bro much much love I replaced that fuse car fired right up man. I wish I could see you a couple bucks.Because you save me 100s appreciate you so much man thanks for posting this ❤ no homo
I got you brother this is why I made this video hoping I would help others save money time and stress from going to a shop and getting ripped off, I’m happy my effort helped that’s all
I have a G 37 sedan and it’s been give me problems too like you said on your video the carbon start so I’m having the problem too. I might just have to check out what’s going on with it.
My car leaks through my engine bay through my dash into my passenger side floor right by my control module. If this isn’t the problem. Idk what is. Checked the control module and everything seems to be okay so I hope your my savior in this situation
I have same problem and I fix it , The solution is easy just press the button make in (on ) and make the gear in N position then press the break to start engine its well work 👍 Good luck
@@gangster9782jus happened to mine your gonna have to fix the issue eventually hope it’s my fuse bcuz I checked everything fuel pump jus Changed the alternator last week on my g37 convertible it was good but was raining the last few days and overnight came out it it jus wouldn’t start at all..
This happened to me this morning. Car was fine yesterday it rained yesterday as well. Woke up this Am and the car wouldn’t start like the battery died. I charge the battery still won’t turn over. Also even with all my lights off my brake and secondary beam lights stay on with a small buzz. Not sure if it’s a fuse issue but since coming across your Video I will look into this.
Hey my 09 g37 coupe use to work fine then trans start slipping changed it got code p0335 for crankshaft sensor changed it then the car wont start I scanned it and got code p0603 what do u think?? Pls lmk asp
My car won’t start took it to the shop.. they still don’t know what’s wrong.. but now I’m going to the store to get fus n to go to the shop n try that…like this is my job.. praying this works. It feels like the same problem at least.
Bro it’s a hard question with out me really looking at the car Because car at 155k might be better keeps and maintenanced Then same car at 75k so it’s just a matter of visual inspections getting some kind of records of the car check oil color smell the oil see if there’s gas mixing look for leaks or things someone can have worked on and and so on that’s what I would do Like I said on top it is very hard for me to give a suggestion like that because they are very solid cars but here and there you do run in to issues just like with any car
Thanks but the wind screwed up your ability to communicate what the problem too bad no closed caption . So something to do with a fuse ?? Trim line water seeping into the area of the car causes the short ? I have a friend it happens to and friend takes it into dealer they find nothing wrong the model is a 2010 Infiniti G37 .
Man, that fuse box is the most confusing thing i have ever seen. Im trying to match it up and it just doesnt match up like that diagram is not correct. What one is the 10 a/t? I have mine right here and for the life of me cannot figure this out
Also for some reason mines printed on the inside of that lid not the outside so i think thats where the confusion is, and my fuses are all different not 10a 10a 10a 10a But instead theres like a 30 and a 15 in there... ffs
I pray this is my issue. Same thing. Started and running fine all days... Parked earlier after an appointment. Went out to go to the store and same thing. SMH
I hope it will work.. I own a shop in Brooklyn New York if you are local I can help!! If you guys need help you can write to me at clockwork Motorsport on instagram I’ll help as much as I can
Did you run any diagnostic to see what codes your getting it might be your maf sensor it can be your throttle body or and so on my ig is LDtuned you can message me there and I’ll be glad to help Out
There are steps to take so I can better assist you First check the battery voltage with a multimeter Second check the main fuses that’s on the positive connector that goes to the battery terminal If those are good.. then there are different steps to take so check if all that and then see I can’t give you an answer on what can it be because it can be anything
My car turns on for half a second then shuts off. Then I can’t lock or unlock the doors from the inside or the key. I wait a couple hours and I’m able to lock the car again. Anyone have something like this happen and know what the problem is?
@@ezkoshows7136 yes, replace your battery terminal. Go to advanced auto parts or autozone. Check if it is loose. I bought a whole new battery and then realized the terminal was broken
This video just saved me hundreds of dollars. This fixed mine as well.
I’m Glad it helped.. guy I will be doing more videos on how to fix problems on cars
Exact same problem. Fixed my issue instantly!!! Ten stars!!!!! I ordered a new starter. Thank goodness it wasn’t shipped yet. Went from ordering a $300 starter to a .30c fuse.
Hey I’m having same issue I changed my starter alternator and ignition comes on and I have power but it won’t start what’s the fuse name and where can I buy it from ?
@@Unkwnzbdid you figure out what it’s called?
Bro much much love I replaced that fuse car fired right up man. I wish I could see you a couple bucks.Because you save me 100s appreciate you so much man thanks for posting this ❤ no homo
I got you brother this is why I made this video hoping I would help others save money time and stress from going to a shop and getting ripped off, I’m happy my effort helped that’s all
Thanks man it works for me! Keep up the good work.
Good stuff man! Glad it was an easy fix for ya.
Thank you brother , this video was really helpful.
I caulked my sunroof shut so it wouldn’t leak no more, worked like a charm. I’m not dealing with that over and over again.
I have a G 37 sedan and it’s been give me problems too like you said on your video the carbon start so I’m having the problem too. I might just have to check out what’s going on with it.
My car leaks through my engine bay through my dash into my passenger side floor right by my control module. If this isn’t the problem. Idk what is. Checked the control module and everything seems to be okay so I hope your my savior in this situation
This man saved my life
💪💪💪
Basically the same thing happen to me. But while I was driving it stopped. A/c blowing and everything. It has been raining hard.
How do I stop the water?
I was going to buy a 2009 Infiniti 4 dr g37 but i think id rather have a key ignition car.
Fixed my problem 👍🏾
I have same problem and I fix it , The solution is easy just press the button make in (on ) and make the gear in N position then press the break to start engine its well work 👍
Good luck
This doesn’t work.
IT WORKED !! YOUR THE MAN BRO
@@gangster9782jus happened to mine your gonna have to fix the issue eventually hope it’s my fuse bcuz I checked everything fuel pump jus Changed the alternator last week on my g37 convertible it was good but was raining the last few days and overnight came out it it jus wouldn’t start at all..
@@Tydatrainer85did you figure it out
@@stockg35x yes it was the same problem ipcm box needed to be changed
Not sure what exactly it is but my car started right up changing that fuse
This happened to me this morning. Car was fine yesterday it rained yesterday as well. Woke up this Am and the car wouldn’t start like the battery died. I charge the battery still won’t turn over. Also even with all my lights off my brake and secondary beam lights stay on with a small buzz. Not sure if it’s a fuse issue but since coming across your Video I will look into this.
I have the same exact problem, did this fix your issue?
Did you manage to fix it? I have the same issue
@@ezkoshows7136 did it fix?
@@shayanyadegari1234 yes, all I needed was a jumpstart
This just happened to me right now this morning I’m stressing about it
I’m having the same issue changed the battery and the wire harness recently if you can get in contact with me it’d be a great help
Thanks u helped a lot brotha🙏🏾
Hey my 09 g37 coupe use to work fine then trans start slipping changed it got code p0335 for crankshaft sensor changed it then the car wont start I scanned it and got code p0603 what do u think?? Pls lmk asp
Thank you my guy. That was my exact problem
I’m happy man
Ty u saved me money bro 👍
Thank you 🙏🏼
My car won’t start took it to the shop.. they still don’t know what’s wrong.. but now I’m going to the store to get fus n to go to the shop n try that…like this is my job.. praying this works. It feels like the same problem at least.
Did it work ?
Thank you of tuned you really help me
My G37 wont start. We’ve had a downpour all week. Will check this now!! Thanks!
U ever fix ? What was it
@@thadopestcarreviews101 yes! I’m embarrassed that it was just a replacement of the battery cable! Love my car!❤️
Mine wouldn’t start the day after getting a car wash . Gonna check this later !
Did the car crank?
Is it worth for me to buy a 2009 Infiniti G37 with 155K miles for 7K any advice bro
Bro it’s a hard question with out me really looking at the car
Because car at 155k might be better keeps and maintenanced
Then same car at 75k so it’s just a matter of visual inspections getting some kind of records of the car check oil color smell the oil see if there’s gas mixing look for leaks or things someone can have worked on and and so on that’s what I would do
Like I said on top it is very hard for me to give a suggestion like that because they are very solid cars but here and there you do run in to issues just like with any car
Thanks but the wind screwed up your ability to communicate what the problem too bad no closed caption . So something to do with a fuse ?? Trim line water seeping into the area of the car causes the short ? I have a friend it happens to and friend takes it into dealer they find nothing wrong the model is a 2010 Infiniti G37 .
Thanks . I will check that one.
Having issues taking off the cover
Happened to me just now after washing the car
Mine turned out to be the starter….started right back up after install
Hi, When your car was not starting were you getting any clicks when starting the car ?
No that indicates a dead battery or a ground issues
Mine is clicking. It sounds like a starter issue
Was your fuse burn ?
Man, that fuse box is the most confusing thing i have ever seen. Im trying to match it up and it just doesnt match up like that diagram is not correct. What one is the 10 a/t? I have mine right here and for the life of me cannot figure this out
Also for some reason mines printed on the inside of that lid not the outside so i think thats where the confusion is, and my fuses are all different not
10a
10a
10a
10a
But instead theres like a 30 and a 15 in there... ffs
What codes did you get when your car wouldn't start
I just got my transmission replaced n mine won’t detect the key
Put the key in the slot and see what it does
Thank you Leo
You’re welcome I’m glad it helped
My q50 3.7 won’t crank think it’s same ?
I pray this is my issue. Same thing. Started and running fine all days... Parked earlier after an appointment. Went out to go to the store and same thing. SMH
Hopefully I'll find out tomorrow. I pulled the battery out for tonight. Hopefully it resets to get me to auto zone in the morning. 🤞
I hope it will work.. I own a shop in Brooklyn New York if you are local I can help!! If you guys need help you can write to me at clockwork Motorsport on instagram I’ll help as much as I can
What if that fuse doesnt look burned, could it still be that? Im having the exact issues
You need to open the ipdm and check if the fuse is good and you have the p sign on the dash then that’s not your problem it’s something different
2017 max. Replaced 12v and now fob dont work
glad you fixed the issue
Cre8tiveGarage yeah man it’s the dumbest problem to have and it can leave you stranded
Did you fix it?
What fuse is it help I wasent able to see it
I need ur help 2008 infinity g35 …..wont start I’m in the bronx
What have you tried? As far as fixing the issue
Where can I buy the fuse
Mines just clicks smfh I got a 2010 g37x sedan
Was it a click, or did the motor try to turn over
Neither.. just gave me 0 response no clicks no crank nothing at all
Did you fix the issue? Mines doing the same
Thank you brother it worked.
Glad it was helpful
You have the k&n installed??
Yes
Yes I’m havin the same problem r u able to contact me
Did you get it to work?
Hey mine starts up and then immediately turns off and I have to step on the accelerator to keep it on. Any idea what my issue is?
Did you run any diagnostic to see what codes your getting it might be your maf sensor it can be your throttle body or and so on my ig is LDtuned you can message me there and I’ll be glad to help
Out
I got that maf code what should I do ?
@@joshuapo4554 well you need to see live data with a diagnostic tool to see maf feed back and then you can pin point the exact problem
Mine did the same thing, clean both throttle bodies and your good to go
Throttle body
Glad u got it started I have a g35 08 and the lights won’t come on the dashboard any suggestions?
There are steps to take so I can better assist you
First check the battery voltage with a multimeter
Second check the main fuses that’s on the positive connector that goes to the battery terminal
If those are good.. then there are different steps to take so check if all that and then see
I can’t give you an answer on what can it be because it can be anything
You ever fixed this issue ?
Man I’m having the exact same problem . Just replaced the fuse. New terminal posts new battery , still no lights no crank and car won’t start
My car turns on for half a second then shuts off. Then I can’t lock or unlock the doors from the inside or the key. I wait a couple hours and I’m able to lock the car again. Anyone have something like this happen and know what the problem is?
I have the same problem, did you find the solution?
@@ezkoshows7136 yes, replace your battery terminal. Go to advanced auto parts or autozone. Check if it is loose. I bought a whole new battery and then realized the terminal was broken
@@josevilchez9829 It ended up just being a dead battery, had it jump started & now it is running as good as new, thanks for the reply tho brother.
My sunroof does the same g37
Lol 17th and CoUrtelyou Rd