CAUTION CAUTION CAUTION CAUTION Using the wrong type of meter to probe that pretensioner has the potential to set it off. If your fingers are in the way it will rip them off. Don't do this unless you know what you are doing. I have been working with these 20+ years and I would not think of putting a meter of any kind in an airbag or pretentioner. I have seen what they are capable of and it's not pretty. PLEASE PIN THIS I DON'T WANT TO SEE SOMEONE HURT BY DOING THIS WRONG
@@poor96svt9 A meter uses a very low voltage through the circuit to do it's test. Not all meters are created equal, on some cheap ones that is enough to set one off. When I did an airbag safety course many many many years ago the tutor used such a meter to set one off. Trust me, you don't want to be close when it happens.
@@Stambo59 gracias muy importante esto, se también del tema de estática por eso siempre es bueno trabajar sin conexión a batería para fines de resistencia no es necesario .
Wow, that is AWESOME!!! So, would it work if I pulled the seats and put in after market seats. Would it bypass the warning light for the seat side airbag from the stock seats?
So what are the color code on the wire's that you are running the jumper from and the small plug on the drivers side has 4 wires solid green, green with yellow stripe,black,dark purple,passenger side has 2 light blue wires one with dark green stripe other with yellow stripe my guess would be the wire's with the yellow stripes
you didn't do anything about the airbag light at all ... all you did was bypass the seatbelt light. as far as a HOW TO VIDEO this vid is not so good. No hate at all to Diesel. He;s awesome, but the content that was advertised by the title of the video was not addressed.
That’s Genius the way you did that! Electric stuff is my weakness! I am overwhelmed by it! This I will remember!
Full load to the face. Lmfao. That was awesome. You are my new best friend.
FULL LOAD
Full load to the face lol 😂
CAUTION CAUTION CAUTION CAUTION
Using the wrong type of meter to probe that pretensioner has the potential to set it off.
If your fingers are in the way it will rip them off.
Don't do this unless you know what you are doing.
I have been working with these 20+ years and I would not think of putting a meter of any kind in an airbag or pretentioner. I have seen what they are capable of and it's not pretty.
PLEASE PIN THIS I DON'T WANT TO SEE SOMEONE HURT BY DOING THIS WRONG
How’s it going to do that if the sensor is unplugged?
@@poor96svt9 A meter uses a very low voltage through the circuit to do it's test.
Not all meters are created equal, on some cheap ones that is enough to set one off.
When I did an airbag safety course many many many years ago the tutor used such a meter to set one off.
Trust me, you don't want to be close when it happens.
@@Stambo59 gracias muy importante esto, se también del tema de estática por eso siempre es bueno trabajar sin conexión a batería para fines de resistencia no es necesario .
That’s an awesome trick!! Do you think it would work on camshaft sensors?
Wow, that is AWESOME!!! So, would it work if I pulled the seats and put in after market seats. Would it bypass the warning light for the seat side airbag from the stock seats?
I was wondering the same thing?
So what are the color code on the wire's that you are running the jumper from and the small plug on the drivers side has 4 wires solid green, green with yellow stripe,black,dark purple,passenger side has 2 light blue wires one with dark green stripe other with yellow stripe my guess would be the wire's with the yellow stripes
THE CONNECTOR AT THE SEAT BELT. ON B PILLER?
Great tip bro!!
can you show a video of what wires specifically that need to be tied together???
Thanks
So the air bag's still work right??
YES
Jscan can turn all that crap off...
Where do I go in JScan settings ? Thanks
you didn't do anything about the airbag light at all ... all you did was bypass the seatbelt light. as far as a HOW TO VIDEO this vid is not so good. No hate at all to Diesel. He;s awesome, but the content that was advertised by the title of the video was not addressed.
Yeah I guess that video is for a little more educated person I’ll try to dumb it down on the next one