I spent so much time in Radio Shack here in Elyria Ohio,that when I walked in and a newbie asked if I needed help,the old hats said,"Thats mr. xxx. He probably has 3 of everything in here.When we need help,we ask HIM.",LOL. But,Radio Shack here stopped carrying components,and now you have to get them off the net. Such BS. It hurt us do it yourselfer hobbiests. I figured it would take a flip flop to do this,but its been so many years that I thought Id look for help now. Thanks for a fantastic project. You covered EVERY bit of needs to make this happen,including the pc board. Bravo !!! Thanks so much bud. Awesome job !!! Subscribing now.
Perfect circuit ❤️ i'm using this over a year now and i've changed the ic only once 🙏 but indicator led not worked in the first place but its not a that big of a deal ❤️☝
Depend on vcc voltage, most of time capacitor charge in high voltage until receive IR signal or push button, in that moment capacitor uncharge and CD4017 get counter+1
After completing the circuit, I see you have the right side connected to the bulb and the wall, how can I make that? + what is the wire on the left? and where does it go?
hi there fascinating vid thank you, is there any chance you know a way to use a bog standard RF 2ch relay board 12v to control an actuator but also with an added DPDT momentary switch to also control it manually, I need to be able to move my driver's seat from driving position to the back of the car (disabled driver) it is on runners and the actuator simply pushes the seat back into the rear of the car so I can transfer from wheelchair to driver's seat and vis versa I am currently using a DPDT switch that works fine but when a carer or friend has been driving they forget to move the seat back ready for me leaving me stuck. I am not very savvy about electronics but have basic electrical training hence ready-made hardware I have tried to use diodes and had no luck I tried to just add the actuator output leads from the DPDT to the output leads of the relay but then nothing works, I just do not get how I can add a manual switch. any help would be very much appreciated.
I spent so much time in Radio Shack here in Elyria Ohio,that when I walked in and a newbie asked if I needed help,the old hats said,"Thats mr. xxx. He probably has 3 of everything in here.When we need help,we ask HIM.",LOL.
But,Radio Shack here stopped carrying components,and now you have to get them off the net. Such BS. It hurt us do it yourselfer hobbiests. I figured it would take a flip flop to do this,but its been so many years that I thought Id look for help now.
Thanks for a fantastic project. You covered EVERY bit of needs to make this happen,including the pc board. Bravo !!!
Thanks so much bud. Awesome job !!!
Subscribing now.
Perfect circuit ❤️ i'm using this over a year now and i've changed the ic only once 🙏 but indicator led not worked in the first place but its not a that big of a deal ❤️☝
Nice video, good job thanks, remote control on off switch circuit se 4.5volt radio kaise bazai,iss par ek video banao
Very nice project sharing my friend❤❤❤
Thanks
You killed the snake and show the stick. Thank You. Now dozens of useless remote controls came to life!!!
0:56
Sir, how many volts of capacitor can be used?
Depend on vcc voltage, most of time capacitor charge in high voltage until receive IR signal or push button, in that moment capacitor uncharge and CD4017 get counter+1
Sir, can you share me the link where you bought your drilling machine
How to add more outputs which can be controlled using IR Remote ? Is it possible to do ?
After completing the circuit, I see you have the right side connected to the bulb and the wall, how can I make that?
+ what is the wire on the left? and where does it go?
you have very nice videos that can give us great ideas I have subscribed.
Thanks for the feedback
Are different components needed for 110 volts? (US outlets?)
No. You can use same circuit.
MAKE YOUR OWN VERY CHEAP TRANSISTOR BASED ELECTORNIC LOCK !!! ruclips.net/video/9-3JrbzKBiY/видео.html
WATCH THIS AND FIND OUT !!
what is your software you used in pcb layout
Se puede codificar para activar con tecla específica en el control?
સારુ લાગ્યુ ખુબજ સરસ રીતે રજુ કરી છે the.
hi there fascinating vid thank you, is there any chance you know a way to use a bog standard RF 2ch relay board 12v to control an actuator but also with an added DPDT momentary switch to also control it manually, I need to be able to move my driver's seat from driving position to the back of the car (disabled driver) it is on runners and the actuator simply pushes the seat back into the rear of the car so I can transfer from wheelchair to driver's seat and vis versa I am currently using a DPDT switch that works fine but when a carer or friend has been driving they forget to move the seat back ready for me leaving me stuck. I am not very savvy about electronics but have basic electrical training hence ready-made hardware I have tried to use diodes and had no luck I tried to just add the actuator output leads from the DPDT to the output leads of the relay but then nothing works, I just do not get how I can add a manual switch. any help would be very much appreciated.
Can i use this circuit to ceiling fan
Very good project sir....
Thank you
MAKE YOUR OWN VERY CHEAP TRANSISTOR BASED ELECTORNIC LOCK !!! ruclips.net/video/9-3JrbzKBiY/видео.html
WATCH THIS AND FIND OUT !!
Hi I have a 4 Ch relay can I make my machine control by 4Ch relay and switch control same time
Sir ,kyaa ye pahle ac se direct connect tha isliye usme capacitor nahi lgaya tha . Baad me dc supply ke liye cap ki jarrorat pari
No, previously I have used LM317 DC supply which provides constant DC voltage. But if you 5V mobile charger then use the capacitor.
MAKE YOUR OWN VERY CHEAP TRANSISTOR BASED ELECTORNIC LOCK !!! ruclips.net/video/9-3JrbzKBiY/видео.html
WATCH THIS AND FIND OUT !!
Sir koi bhi pc kaam mai lai sakty hai chahe remote ki ho
Can we switch off using button and switch on using it remote
How do you pair remote with controller
Is it possible to make it work with a specific button only on the remote?
One solution could solve this need. Just cut all push buttons of control remote, but one ou want. Be healthy and happy, hugs.
could you substitute a 4017 chip for a 7400 series IC chip instead?
Best regards, but 4017 is a decade counter, 7400 series must perform all functions of 4017. Hard work to get good result, inglorious. Hugs änd Tks.
It can access any remote?
What do you call the yellow wire? What name is it?
Sir kiya is circuit mai all remote use sakta hai
can you also include how you soldered the component together
Thank you thank you so much for this video
If i have to more than one conection what will be the circuit diagram
can i only change 9v relay and 9v dc source?
Never use Acrylic sheet. Do you need special tool to cut to match the printed paper? Can it be cut with normal scissor?
Not scissor, you can use knife or hacksaw blade.
I don't have 100nf capacitor is there any alternative for that?
I want this pcb from where can i purchase this PCB if you sell then what is it rate and how can i get it
Hola, buenas noches, se puede conectar un control remoto, un switch táctil, un ldr y un Infra Rojo como on off al 4017 similar al diagrama? 😮
Why you're using CD 4017IC
sir if i want to make this project on 12 volt what will i change this curcuit plz help me out thanks
and what will range this ir reciever
Can you make rf receiver with remote control?
This circuit have you design on your own ?
Yes. this is very common circuit. In previous video I have made it on breadboard ruclips.net/video/HLCgMj8GS80/видео.html
MAKE YOUR OWN VERY CHEAP TRANSISTOR BASED ELECTORNIC LOCK !!! ruclips.net/video/9-3JrbzKBiY/видео.html
WATCH THIS AND FIND OUT !!
Can I use a blank circuit board, fix all the components and then solder from behind. Thanks
Yes you can
Did it worked please tell
Good circuit.
Thanks
How far does the range go ?
👏👏👏
Amigo en donde vivo ya no consigo el Tsop 1748, por cual puedo reemplazarlo?
Very nice 👍
Ótimo trabalho
Sir, Am i use ir 1838? ( alternative by 1738)
You can try, the output pin should become low when it detects any ir signal.
@@TechStudyCell Thank you sir.
@@TechStudyCell Thank you sir.
Sir power diode ke paller me resistance capacitor sunbber curcite me resistance, capacitor ka value kase nikale pl. Video kanye
How much enter the circle?
Voltage
Sir 5amps 10amps led driver circuit video upload pls
Ok
MAKE YOUR OWN VERY CHEAP TRANSISTOR BASED ELECTORNIC LOCK !!! ruclips.net/video/9-3JrbzKBiY/видео.html
WATCH THIS AND FIND OUT !!
Can u send me pdf of this project
How to voltage 220 & 12
Pls share the schematic for this circuit
At 3:37 minutes of the video, there is the sschematic circuit. B Happy.
Sya tidak menemukan skema
Would have been even easier with a LM358 opamp
I designed this devices its work two day but now it is not work i design agin some things happed i cant find my fault😪
I made this project but not working
Circuit diagram please
Check description
If you sell this
Not working
👏👏👏👏✌✌✌✌👍👍👍👍
Any one Please send this project report
Ap bana ke de denge kya sir
Ou est le schéma tu es vraiment égoïste
Sir tell me
Please reply me
I tried this but not working