Oosh! That double cardon assembly really is a beauty! This is a step up from your SJ build, such attention to detail! It’s so heartening to see a fellow west country guy knocking out such nice stuff with such modest tools. “Upload the CAD file to the grinder” had me Lol’ing! I’m immediately gonna go tell all my engineering buddies about your channel, see if I can help some more RUclips dosh trickle in for you, you deserve it!
I like your methods simple but high quality except for that joint that was pretty complex but we dont all have a plasma table and 20 different welders and all the other stuff most people don't have great work cant wait to see it finished
Glad to see a new power wheel project on your channel. The body is quite small but it seems you found solution to fit. Chassis is very smart , I'm not sure to understand how the transmission work but it's very well made!
Yes your back at and you're a top tier fab worker. Your hand drawn cardboard CAD file was top notch, then you up loaded it to the hand grinder and voila a sorta subframe. Dude that was hilarious you had me cracking up there 😆😂😂. The one thingamabob and 3 ufoer jammers, similar, but opposite had me cracking up again 😆😂😅. The double card and joint turned out nice, well done. I'm looking forward to this build just like your Jeep build.
That´s some really nice engineering and simple man´s fabricating you did there. Also really enjoyed watching, this was a great video. Thanks for sharing, I´m looking forward to see more progress on this build. We gotta set up some kind of dirt racing meetup in europe so we can all showcase and race our homemade contraptions! Greetings from Germany!
Thanks man I appreciate that! Man that sounds like an awsome idea! Maybe in the future when the dust has settled we could organize something! Would be great to find some offroad trails! Take care man!!
Greetings from Russia. I watch your projects and admire them! You're great! You inhale and motiai! Thank you for the opportunity to learn something new. Good luck
That's a genius idea. with knuckle set up! assembly, its great idea, can't see why it shouldn't work, as soon as I saw it, it made perfect sense to me.
@@councilhousecreations8035 some of the aftermarket cv axles now come with 8 ball cv joints and ball spline shafts, you may want to look into that too.
@@councilhousecreations8035 Im trying to make of model of the joint, and i cant seem to get it right. I see you have two arms coming off behind each joint coming toward the center on each side, then you have two links connecting the arms, using three heims and one rotary pivot, am I missing something?
Awesome work. It's a lot of work to fab, record and edit. 22 min video takes days if weeks to create. Pretty amazing what a basic welder, grinder and metal lathe can do.
Absolutely stunning build quality, the guys at Bad Obsession Motorsport, CarsAndCameras and Grind Hard Plumbing would be proud of your steering ujoint thingymabob. Glad to see your madness on the screen, keep up the great work!!
The design of the center rails reminds me of colonel senders'. Can't wait to see how well that steering works and holds up. Looks like a great start! that's one beautiful multi link.
Hi mate I was wondering if you would be able to design and fit a front sway bar for my can am buggy as they used to sell them but were discontinued I know how well your 4x4 works so thought you were probably the best person to ask?
@@councilhousecreations8035 Nice to see stuff made in the UK for once. Loads of great content from American builders out there but it's rare to see good stuff made here. Shame it's all so damn expensive and restrictive vs the States! Keep it up, love the mini excavator, looking forward to seeing this done!
When i see how you do the engine mounting brackets, my thumb automatically hits the subscribe button and the bell..🤗👏🏻 I'm from Philippines. I love your passion and hard work on your Build's.👍👏🏻
Loving the build! Bout to watch the newest episode you put out yesterday! Keep up the amazing work and you'll have a huge, die hard following in no time!
You’re insane man! I’m taking all the notes I can hahah, I have another version of senderella I’ve been working on for a little over a year and once it’s fine tuned I’ll be able to join the power wheels gang. Can’t wait to see how your RS turns out!
Thanks man! Im stoked to be back building a powerwheels again! Man that sounds awesome! Have you got any vids of it id love to see it! Theres plenty of builds popin up on insta that are well worth checkin out! Take it easy bro! 👍
Good old Pro-CAD those files, never let me down! Who needs a computer hey!... Oh, me, I need a computer to watch this dont I... 🤣🍻. You've got a great channel here bud keep it up n take care 👍🏻
🤣 thanks man! Great to hear from you sorry it took me so long😅 You look after that computer of yours, your the whole reason i make these vids!! 🤣 take it easy bro stay safe n that!!
Man, when you uploaded that CAD to your HNC (Human Nervous Cutter) - Epic! ;) Youre a mad scientist! Definetly earned yourself a sub with the fab work and humor!
those two u-joints together, that is what you call a constant velocity joint, or CV joint. that's because no matter where the force is applied, it's still distributes the load evenly. if you want to see the old school, 500 cubic inch V8 handling, big dog CV joints, just Google a 1968 or 1969 Cadillac 472 or 500 cubic inch V8 powered coupe deville drive shaft, for example, but make sure it's not an eldorado though, that car was front wheel drive.
My only concern is that it might look like a 4 door unless you make the top of the door frame higher up so it’s proportional to everything else but this looks sweet
Please brace up the arms that are on the bearing race for the knuckle(? I think it was). The rest of the build and the engineering was so clean but right there those bars could’ve been like 1” longer and cut at an angle. I’m thinking a pipe that’s cut on an angle for a sleeve that could go over the outside and meet the bearing cup/race nice and flush and flat. I was absolutely blown away by the rest of the build up until that little part
Is this England’s answer to Grind hard plumbing?. Respect!.
100% yes! This guy is on their level
In my head i am 🤣👍
Definitely got a ratherbewelding vibe about this video
Like rather b welding and grindhard plumbing together.
Maybe a little cars & cameras in the mix as well.
Someone send this guy a cnc plasma table!....no more nibbling, grinding and cutting with a hand disk...massive time saver! Great work mate!
Thanks bro! Thank would be holy grail!!
That steering with the ability to travel is a true work of genius! Well done
thanks man! i hope i works out!!
Wath an absolute legend you are !!!!
No cnc garbadge can replace skill !!
Thanks for that video
Thanks a bunch man! I appreciate it!
Oosh! That double cardon assembly really is a beauty! This is a step up from your SJ build, such attention to detail!
It’s so heartening to see a fellow west country guy knocking out such nice stuff with such modest tools. “Upload the CAD file to the grinder” had me Lol’ing!
I’m immediately gonna go tell all my engineering buddies about your channel, see if I can help some more RUclips dosh trickle in for you, you deserve it!
Thanks man i really appreciate that!
one of my favourite things to come out of lockdown - your use of tools in the builds is so simple and effective!
Thanks man!
I think it is awesome that you added capitalization. 👍
Looks amazing! Makes me think of a robot seeing the steering in action.
Thanks bro!
The steering knuckle looks incredible!!
Almost like what you would see on a helicopter collective!
can it be done with 3 fingers instead of 2?
So happy RUclips recommended this
What sort of (beautiful) sorcery is this streering!?😮 It's like an organic mechanism!
Dude your gunna love part 2!!
Its cool how everything u do is custom but still within the ability of the average person
Thanks bro!
Underrated channel. I enjoyed watching this project very much.
Thanks bro! Much appreciated!
There is some mental gymnastics going on with this build!! Nice work🤘🏼
Cheers bro!
Finally someone did this kind of build
Amazing that he did all of that with a grinder. Keep it up 👍🏻
Thanks man! Will do!
I like your methods simple but high quality except for that joint that was pretty complex but we dont all have a plasma table and 20 different welders and all the other stuff most people don't have great work cant wait to see it finished
Thanks mate! I like to keep it simple''ish'' 🤣
Great engineering. Looking forward to seeing more of your fantastic work. All the best.
Cheers bud!
What an unbelievably sublime piece of engineering !
that steering mech is on point existed to see it in action
I 👊🏼 the sub!!
Thanks man! Hope it all comes together as planned!!
Your definitely a master at your craft... I always enjoy watching someone who's resourceful, nice work!
Thanks man!
A double cardon joint onna front halfshaft. That's hilariously cool
Hope it works lol!😅
@@councilhousecreations8035 so do I!
one word....."mesmerizing" ok maybe more....a true Beautiful work of art brother
Thanks man! I Appreciate that.
yeah those first brackets left me amazed.well done.they look cnc quality
Glad to see a new power wheel project on your channel. The body is quite small but it seems you found solution to fit. Chassis is very smart , I'm not sure to understand how the transmission work but it's very well made!
thanks man! im not entirely sure if this will work out but hey it worth a shot!
I'm sure your a magician on the side incredible build
Whens part 2 coming definitely intrigued to see more
WOW you have some amazing fabricating skills there mate, awesome, can wait for the 2nd episode 🇬🇧
Thanks mate!
I’m new to your channel!!
I loved your CAD file. “Just upload it to the grinder”...!!!🔥🔥🔥🔥🔥💪🏼🤣🤣🤣🤣🤣🤣🤦🏻♂️
That’s a T-shirt my friend!!!
🤣👍thanks bud! I think you mght be right!!!
Realy man it's coming up great...specialy the main chassis work it's awesome I realy loved it👍👍👍
Thanks bro! I appreciate it! 👍
Yes your back at and you're a top tier fab worker. Your hand drawn cardboard CAD file was top notch, then you up loaded it to the hand grinder and voila a sorta subframe. Dude that was hilarious you had me cracking up there 😆😂😂. The one thingamabob and 3 ufoer jammers, similar, but opposite had me cracking up again 😆😂😅. The double card and joint turned out nice, well done. I'm looking forward to this build just like your Jeep build.
Thanks man! I love how you actually spelled ufoer jammer!! 🤣🤣 il hav to make up some more words to explain the rest tho!!
I noticed the anti-weight as soon as you pointed it out. 10/10, would notice again.
I watch from Poland, I am full of admiration, great movies
That´s some really nice engineering and simple man´s fabricating you did there. Also really enjoyed watching, this was a great video. Thanks for sharing, I´m looking forward to see more progress on this build. We gotta set up some kind of dirt racing meetup in europe so we can all showcase and race our homemade contraptions!
Greetings from Germany!
Thanks man I appreciate that! Man that sounds like an awsome idea! Maybe in the future when the dust has settled we could organize something! Would be great to find some offroad trails! Take care man!!
@@councilhousecreations8035 Absolutely!
How about we start some kind of group chat with like minded creators from around Europe as a beginning?
@justrandompfusch yeah that sounds like a good idea! Il let you start the chat im rubish at social media stuff! 😅👍
Greetings from Russia. I watch your projects and admire them! You're great! You inhale and motiai! Thank you for the opportunity to learn something new. Good luck
That's a genius idea. with knuckle set up! assembly, its great idea, can't see why it shouldn't work, as soon as I saw it, it made perfect sense to me.
I could play with that assembly all day.
Woooo! You've been busy mate! Looks amazing, some tricky engineering right there! Cant wait to see this beast in action!
Thanks man! Lol that was a bit of mind bender and it doesnt get any easier from this point on either!! 😅...
Your double cardan joint mechanism is beautiful.
Thanks man! It was a bit of a brain bender!!
@@councilhousecreations8035 some of the aftermarket cv axles now come with 8 ball cv joints and ball spline shafts, you may want to look into that too.
@@councilhousecreations8035 Im trying to make of model of the joint, and i cant seem to get it right. I see you have two arms coming off behind each joint coming toward the center on each side, then you have two links connecting the arms, using three heims and one rotary pivot, am I missing something?
Awesome work. It's a lot of work to fab, record and edit. 22 min video takes days if weeks to create. Pretty amazing what a basic welder, grinder and metal lathe can do.
Thanks man i appreciate that! I mainly work on it in the evening's so it does take a while. Take it easy bro!
Hope that he will get the plasma cutter shortly, it 'll help a lot. Btw great skill on the hand grinder
Thanks man! One day i hope!!
Absolutely stunning build quality, the guys at Bad Obsession Motorsport, CarsAndCameras and Grind Hard Plumbing would be proud of your steering ujoint thingymabob.
Glad to see your madness on the screen, keep up the great work!!
Thanks a bunch man i appreciate it!
I cant wait for the part 2
The design of the center rails reminds me of colonel senders'. Can't wait to see how well that steering works and holds up. Looks like a great start! that's one beautiful multi link.
thanks man! i appreciate it!
Love your work brother. Amazing skills. Definitely cant wait for a new episodes!
thanks bro!
@@councilhousecreations8035 WOAH.... is that a part of The Terminator`s Endoskeleton lolol :):)
Hmm...🤔i like ur thinking bro!!!
Gosh everything you’re doing is a work of art
Thanks bro!
That is one cool shell I can already imagine what you will do to it please help me with my project 🙏 I could even buy a gazebo to keep it in lol
Hey man! Maybe we could sort something out in the summer when the goin is easy! 👍
@@councilhousecreations8035 sounds great hope we have a better year this year
Hi mate I was wondering if you would be able to design and fit a front sway bar for my can am buggy as they used to sell them but were discontinued I know how well your 4x4 works so thought you were probably the best person to ask?
Watched 1 video. Subscribed. Never done that before.
thanks man i appreciate that!
@@councilhousecreations8035 Nice to see stuff made in the UK for once. Loads of great content from American builders out there but it's rare to see good stuff made here. Shame it's all so damn expensive and restrictive vs the States! Keep it up, love the mini excavator, looking forward to seeing this done!
When i see how you do the engine mounting brackets, my thumb automatically hits the subscribe button and the bell..🤗👏🏻
I'm from Philippines. I love your passion and hard work on your Build's.👍👏🏻
Field engineering very impressive. On your way to another fantastic build !
Thanks man!
Amazing work ! This is clever…
Thanks man!
New subscriber here, I'm hooked.
You have some great fab skills!
Look forward to seeing the progress, keep up the good work bro 👍🇺🇸
Thanks a bunch man! Cant wait to get the next vid up!
Damn, this is great fabrication work
Thanks man!
Great job ,super fine technical hope next very soon.
Thanks man should be soon!
Wow awesome work brother. You are real specialist iron work.
Matte u got some MAD skills those front hubs/robots are nuts
Absolute legend
holy doodles man! That joint turned out souweeeeet! Mindblowing really! ^_^
Thanks bud!
Good job, I like the front axle
Amazed by your creativity. Can't wait to see part 2. Cheers from France
Thanjs man i appreciate it!
I was actually thinking of making a rally power wheels the other day lol I can't wait to see this finished
Wooww i can't wait to see it finished
thanks man me too!
Loving the build! Bout to watch the newest episode you put out yesterday! Keep up the amazing work and you'll have a huge, die hard following in no time!
Thanks man i appreciate that! Il hav to start puttin out more vids!
@@councilhousecreations8035 absolutely!! I'd love to see more videos! This build is sick so far! That chassis.... Is a flipping work of art!
every time i see one of these power wheels builds it makes me want to do one myself but with 4 hub motors
You’re insane man! I’m taking all the notes I can hahah, I have another version of senderella I’ve been working on for a little over a year and once it’s fine tuned I’ll be able to join the power wheels gang. Can’t wait to see how your RS turns out!
Thanks man! Im stoked to be back building a powerwheels again! Man that sounds awesome! Have you got any vids of it id love to see it! Theres plenty of builds popin up on insta that are well worth checkin out! Take it easy bro! 👍
@@councilhousecreations8035 I have a video of the first test ride, I just found you on Instagram I’ll go ahead and send you some clips!
Nice mate! Love ur style. And the toy focus is a really good looking base
Thanks man!
Luar biasa, saya tunggu vidio anda selanjutnya..
*so clever! producing those tiny/little parts ugh insane bro*
Just brilliant...! Love your CAD skills, let me guess Autocad Inventor? lol
Thanks man! 🤣👍
Fastastic jobs ..
Salute from indonesia
Thanks bud!
Great content, great production, the odd funny joke here'n there.. Im hooked, looking forward to the next video.
Thanks man! I really appreciate it!
Bigger engines definitely in the future, nice work though it'll be fantastic to see what you can do with a bigger budget.
Excellent quality work james 👌
Thanks mate!
what kind of wizardry is this?? It doesnt bind up yet i just cant fathom WHY. It looks like it rotates round 4 centres.
Yeah it took a day or two to figure that out lol!
Nice work .. I enjoyed the video..can wait to see finished product
Thanks man!
Keep this up dude, that fab work is something else! 👀💯🔥 About time we had something like this built in the UK. 👌🏻
A small plasma cutter would save a huge amount of time and ease repeat pieces
Tell me about it lol!
Good old Pro-CAD those files, never let me down! Who needs a computer hey!... Oh, me, I need a computer to watch this dont I... 🤣🍻. You've got a great channel here bud keep it up n take care 👍🏻
🤣 thanks man! Great to hear from you sorry it took me so long😅 You look after that computer of yours, your the whole reason i make these vids!! 🤣 take it easy bro stay safe n that!!
Awesome work 🙌
Subbed and looking forward to this build.
Thanks bud!
Mate you are a wicked thinker. Loved you videos, well done and keep it up!
Man, when you uploaded that CAD to your HNC (Human Nervous Cutter) - Epic! ;) Youre a mad scientist! Definetly earned yourself a sub with the fab work and humor!
I’ve been waiting for this video! Awesome work man, the style and ingenuity you put into your builds is amazing!
Thanks a bunch man! I appreciate hearing that trom you! Cant wait to cu tearin it up with yours!
Excited for the update on this
Proper job bey.
Thanks bud!
waiting for the next episode👌
Thanks bro!
Got my sub brother, great work, looking forward to the next ep 👍👌
Thanks bro! Me too!!
yes! love it!
thanks man!
Quite nice work.
those two u-joints together, that is what you call a constant velocity joint, or CV joint. that's because no matter where the force is applied, it's still distributes the load evenly. if you want to see the old school, 500 cubic inch V8 handling, big dog CV joints, just Google a 1968 or 1969 Cadillac 472 or 500 cubic inch V8 powered coupe deville drive shaft, for example, but make sure it's not an eldorado though, that car was front wheel drive.
nice work !
Cheers bud!
Sei un grande! Vedere i tuoi video mi entusiasma tantissimo....sei una fonte di ispirazione,complimenti....aspetto con ansia la 2° parte😍..
Thanks bro i appreciate it!
Looking good man it's gonna be fire!
Thanks man!
Wow sir you have skills 👍
Thanks bud!
Should use a harden steel nut just so it prolongs the life and etc, but I really like the build
My only concern is that it might look like a 4 door unless you make the top of the door frame higher up so it’s proportional to everything else but this looks sweet
Lol yeah i think i leave the doors til last 😅👍
That's amazing piece for engine but this Car horns haven't a good balance for high rpm
Great stuff bud 👌🏼 you got a new sub here
Hey thanks man!
Nice nice nice. This'll worry the children. lol, Good show.
🤣lol i stood there looking a it last night and thought... well... there not much powerwheels left in this powerwheels build!!😅
soo crazyyy , super work
Thanks mate!
Thanks mate!
Please brace up the arms that are on the bearing race for the knuckle(? I think it was). The rest of the build and the engineering was so clean but right there those bars could’ve been like 1” longer and cut at an angle. I’m thinking a pipe that’s cut on an angle for a sleeve that could go over the outside and meet the bearing cup/race nice and flush and flat. I was absolutely blown away by the rest of the build up until that little part
Fear not my friend! Theres a lot more complication to stuff in there yet... thanks bro!