DIY Wearable Iron Man Arc Reactor with 5 Interchangeable Faceplate Designs (3D Printed)

Got a 3D printer? Try building this #IronMan #DIY under-the-shirt #ArcReactor with 5 swappable faceplate designs!
⚡Subscribe Here: shareahack.com/link/more-videos
🤖 For a full step-by-step guide, visit the corresponding #instructable here:
www.instructables.com/id/Iron...
------------------------------------
💫 FILES
Download the 3D-printable files for free from Thingiverse here:
shareahack.com/link/arc-react...
-------------------------------------
💡 SUPPLIES
Larger Circle 90mm 12V LED (for outer rim light): amzn.to/2CM59sq
Smaller Round 12V LED (for center light): amzn.to/3jdNVF8
1-Inch Fabric Elastic (for wearable harness straps) amzn.to/32xpug3
2-Wire Pigtail Connectors (for easy modular plugging and unplugging): amzn.to/30kDJ5b
Modular LED Switch (for switching lights on and off): amzn.to/3hdjMnw
--------------------------------------
🛠 TOOLS
3D Printer: amzn.to/30lvHZJ
Transparent 3D Printer Filament: amzn.to/2WwZuO3
Opaque 3D Printer Filament [Black or Blue is ideal]: amzn.to/2CcDNfr
Soldering Iron Kit: amzn.to/30s7t0e
Fabric Scissors: amzn.to/3jc7kGB
Needle & Thread: amzn.to/2WxsqW6
Hot Glue Gun: amzn.to/396OoEr
----------------------------------------------------

[@FilamentWizards]

I love how simple the electronics are

[@stevenA44]

I had already made the decision to print one of the other models before I seen yours. I might print it later. I like the 2nd design plate in yours. I do like the one I already printed, mainly due to the clips where the red magnet wire wraps around them. I just think they look nice.

[@Pourkhoa]

This is awesome! Definitely need to try my hands at this.

[@shareahack]

Thanks! Let me know how it turns out 😎👌

[@fiznits237]

I made one. It looks so cool and I used a 12 volt battery pack to make the lights extra bright.

[@kashgohel]

A dimmer switch would be a good addition. You could ramp up the brightness gradually. I made an arc reactor using one.

[@torpedoxd7123]

My favorite arc reactor design is the Mark 50 reactor.

[@anubhavvashishtha9979]

You deserve much more, dude.

[@das_it_mane]

That's pretty sick!

[@shareahack]

Thanks dude!

[@CoolRetro1234]

I love your videos. They are really interesting and enjoyable to watch. Keep up the hard work!

[@shareahack]

Thanks! Glad you enjoyed

[@IWETROBOTICS]

Awesome

[@echo_is_probably_sleeping]

14:18 is my favourite design.
Also, this is super cool! Great job!
Unfortunately, I don't know a thing about 3d printing.

[@RahulJC]

Should have watched the video before i started printing and assembling.. thanks for the amazing work!!!

[@BoyWithUkeLive776]

I love it!

[@rajeshmakadan8645]

This is a very nice video and arc reactors

[@Arc_Seven_Review]

Awesome!!! I would be like that.

[@darknemesis897]

It awesome bro...

[@MovieXplaineRAmith]

Wow❤

[@MEMESRAINTV]

Nice bro love from Kashmir

[@sigmamale7512]

14:30 is my favourite design.

[@sayalikshirsagar3477]

My favourite arc reactor design is mark 1

[@rajeshmakadan8645]

I like the mark 5o

[@lamela76]

For some reason my center light BARELY lights up when it's connected to the ring... but it works by itself.

[@bizzybdj]

fixing to print this. nice stuff. what is battery life

[@jasongradyphstiger6179]

My favorite is the iron man 2/the avengers arc reactor design.

[@tamannatoor4718]

The mark 85 arc reactor is the best

[@danielsun55]

Quick tip: you can get a 9V battery connector from an old 9V battery.

[@kelomaklms5749]

3rd face plate is my favourite…

[@rafystarkpr]

Great video. A friend of my and fan of my geek culture Channel... Is made this project for me by my character on my channel. So, the only things I need to buy, is the circle light and the center light. But I have, two question for ask you. First... What is the liquid spray under the circuit electric and for why? And second, do I can put a better source of energy... Like four battery AA to the leds... For more energy and bright? Thanks

[@thomaslong9061]

Awesome design for guys!!! but I am not sure it would work for women a design more around 2, 4, 9, and 10 would work with a single forway connector in the back would work better and may work out better for both as it might not want to ride up as much

[@shareahack]

That is a really good point Thomas! I will experiment with some willing guinea pigs and hopefully the Thingiverse posting will evolve over time to accommodate all use cases: www.thingiverse.com/thing:4544459

[@celsodeleon4062]

Did you use just white lights? Or did you add a blue?

[@thomaslong9061]

Also do you happen to have a part number for the small center light panel?

[@shareahack]

I got the small center LED arrays from Amazon: amzn.to/3jdNVF8
A full parts list can be found in the Instructable: www.instructables.com/id/Iron-Man-Wearable-Arc-Reactor-Under-Shirt-5-Design/
Thanks again for your input I really appreciate it!

[@seankeilberg5631]

all of them

[@manishasaxena7665]

14:46 my favourite design

[@madebudiarsana5925]

Were i can buy that

[@IWETROBOTICS]

This is amazing. I also built an Ironman suit u might wanna see it 💪🏾😂

[@keunyoungpark3478]

maybe you could make the light powere by a battery

[@berkcan3475]

thats pretty cool, it would be perfect if you just print them smaller just to not get mocking looks ;)

[@ridzwanirawan_]

I think if you use a magnet to stick it on the shirt it will be more portable. and add blue light to make it more realistic. anyway i will try it, thanks for the template

[@totdestroyer7151]

Using a magnet is a bad idea, ive made one and the magnet attached to the shirt pulled the shirt down and shofted to much, the harness is a better option because it keeps the reactor in place

[@sigmamale7512]

Can the size of the reactor be changed

[@off-gridscandinavia4048]

Has there been some DMCA on Thingiverse for this?
I keep getting an error after a few seconds on the page, not matter the browser or country I'm opening it from.
Other makes on Thingiverse work just fine. :/

[@shareahack]

Hey! That's really strange...The Thingiverse listing seems to work fine for me, maybe it's just because it's a new addition? Not sure.
I manually uploaded there files for you here: shareahack.com/link/arc-reactor-download
Just click on the blue "download" button for the zipped package. Let me know if it works for you.

[@off-gridscandinavia4048]

@@shareahack, thanks a lot :D

[@wfrederi67]

I'm getting the same type error.
'WordPress Error 500'

[@rajeshmakadan8645]

My favorite arc reactor is the 3 one which has put on your chest

[@PrestynCreates]

I have a full tutorial on how to make a iron man chest if you’re interested here’s the link m.ruclips.net/video/9n1JqalH6vQ/видео.html

[@mr.creator7725]

You could have just used magnets to stick arc reactor on your vest instead of that long strips

[@XIIITk]

The print files are no longer available?

[@shareahack]

Still available for free! www.thingiverse.com/thing:4544459

[@XIIITk]

@@shareahack Tks, partner. I owe you one

[@macspencehand]

Mark 85

[@nihgtzero]

Yeah iron bra!!

[@mikemclaughlin7498]

Why go through all that hassle and discomfort with a strap? Just use neodinum magnets. Place a magnet on the back of the prop and then place another magnet behind your shirt. The two magnets will connect and hold it in place on your shirt without all those crazy straps.

[@8-bitvibing814]

Can I have this??? For real tho.

[@InfinityWorkshop]

You can make one of the original one.... Mk1 arc reactor.... Without any 3d printer

[@8-bitvibing814]

@@InfinityWorkshop thanks.

[@InfinityWorkshop]

@@8-bitvibing814 welcome

[@Exitz909]

Can you buy this I want to fool my friends!

[@abhaysingh5046]

I think people will notice the strips 👙first before the reactor.🤐