+Revegelance You realize that is a movie. That relatively would not be possible I mean Roberty Downy Jr (Tony Stark) is not precisely a genius in real life.
That would look a hell of a lot better if you weren't so damn reliant on hot glue. It's got its uses, but it's messy AF. You'd have been better off using superglue or epoxy resin.
did you try to turn it off then on again..?:: ok did you try playing card games with someone?.:: will that usually works.... hmmm.....did youuuu..did you try to call a someone to fix it?.::: will fuck it and get a new one god damn it
But you can get those in stores. It would be cool if he did but I think he's focussing on iconic props which you can't see in stores. But good suggestion.
you could wire a relay in by itself to rapidly blink and then you add some glow in the dark in a couple of areas so it could look like some areas to looks like it dimming when other parts just go dark
When I made my latest arc rectors, for the light ring I took clear 1/4 in Plexiglas and took a circular drill bit and cut out a hole, then went a couple bit sizes bigger and cut out the ring, then I used my dremel to sand it down and make it opaque and murky, my latest arc reactor, I drilled in 1/2 way into the ring in several areas and inserted 3mm LEDs and wired them all in parallel
for the tube.. if you want to bend easier use a heat gun and warm it up a little until i gets pliable. instead of hot glue use CA glue, its super thin and drys in 20 sec. Ive used CA glue as a coating because you can polish it up and make a glossy hard to scratch finish.
I Loved This.. I Have Seem Some Others Before.. But Your Idea Was The Best.. I Will Be Making My Own In 2016.. {After My PaceMaker Upgrade}.. I Have Always Said.. I'm Like (IRONMAN) Just On A Smaller Budget.. This Is Awesomeness.. Thank You Very Much..
if you want to avoid all the hot glue over the place (a lot of people commented that it decreased the projects value) you could use another foggy tubing that is more pliable, or you could use super glue instead of hot glue, or you could use a hot glue stick, shave it down a bit to be thinner, then put it in some warm water to make it more pliable, then glue it to the arc reactor (just some ideas)
Depends: Special editions of games? Not at all. Plastic of something of the hardware store? Depends (again): If you haven't stuffed your house full of it, so your house basically won't be "lifeable" anymore, then nope.
This was rather fantastic. I have to say, though, I was hoping you'd make it so we could wear it under a shirt or something. I guess that's what imagination and work is about! Call me inspired!
"Tony Stark was able to build this in a cave! With a box of scraps!" "Dustin was able to build this in his living room! With a bag of parts from the hardware store!"
hey thanks for the help I already have the whole alien suit and he flies but all I need is that look like it has a plug inside of a few typos that and have to fly
Looks great! Can you tell me what size tubing you used for the perimeter? I seem to be having a hard time getting it the same diameter as the strainer and thg tubing kinks.. Thoughts? Thanks so much!!!
Hey Dustin, I am gonna make a replica of the broken component in S5-17 of Agents of shield. And I have to make a light source that is in front of that component. I seems pretty the seem light source of the arc reactor. What is your insight?
his kid's holloween costumes are probably dope af
Yea he makes his kids fly
The problem he had with the plastic tube at 5:10 Could be solved by dipping the tube into warm water until it soften.
Gabriel Abreu Lugão Ooh that's a good idea!
You've watched way too many soft tubing water cooling videos 😜
Or using a heat gun
james while , this is an easy tip that iv found in Cosplays forums/reddit.
too much hot glue; Iooks cool either way, but it's a shame you can also see the hot glue.
Behemothokun It's part of the DIY charm!
Behemothokun couldnt he use apoxy or super glue instead? I think it would be more secure in place and there wouldnt be alot of visible glue
+Dustin McLean thanx! now the flux capacitor!
Beef, just tried it with epoxy, it gets really messy.
***** I've done it many times..
Now let's cut a whole in our chest so the reactor will tightly fit
Luke Schwartz Yeah
*hole
I'm going to use a dremal but you don't have one you can use a hacksaw, just be a little more careful
Gavyn
Luke Schwartz oof
I built an arc-Reaktor like this, too.
It looks very nice. Without this video I never had built it. Thank you.
Great!
"Tony Stark was able to build this in a cave! With a box of scraps!"
+Diego Valenzuela well he is not tony stark
+Hrishikesh Siv and stark made a better one once he was home
i dont think missles are scrap
+Hrishikesh Siv its a joke dude, just understand
+Hrishikesh Siv its a referance from the iron man movie...
AWE Me shows you how to make Awesome Stuff! ►► brk.cm/1JsMubC
AWE me Make an Assassin's Creed hidden blade that can extend and retract with a flick of the wrist. That would be awesome for AC cosplayers.
AWE me make a assassins creed hiddemblade
You should do something steampunk
AWE me Make the Hylian Shield or Majora's Mask from Legend of Zelda ;)
Make odin's sword
PORTAL GUN!
Do you want to kill the poor guy ???
Lmao
001100AAAEA It's easy
Yes portal gun!
***** yeah easy step one buy it from the valve store
there is no step 2
Write “proof that tony stark has a heart”
R.I.P tony stark
And plus he died In endgame
sonle ik but he’s not dead irl
@Sarah D the character is though
After watching all these DIY videos, every time I go shopping I'm always on the look out for items that might come in handy for my prop builds.
That would be impressive, but Tony Stark was able to built this in a cave! With a box of scraps!
Revegelance Well I'm sorry, Dustin's not Tony Stark lol
Revegelance and parts from military equipment
And the help with some cool dude
+Revegelance You realize that is a movie. That relatively would not be possible I mean Roberty Downy Jr (Tony Stark) is not precisely a genius in real life.
+Sir FusionMiner How dare you .-.
I want to know how you made that Flux Capacitor in the background :)
Fred Banionis
Same here. I'd put that up in my office.
He made a video on how to make it
That would look a hell of a lot better if you weren't so damn reliant on hot glue. It's got its uses, but it's messy AF. You'd have been better off using superglue or epoxy resin.
Omicron9999 that can be expensive tho. Hot glue is cheap, cools quickly and is easy to use
Now the next step is to carve a circle in your chest and put it in
You should put a blue film over it so it looks more true.
HELP something went wrong, the reactor isnt powering my iron man suit!
Leonard Greenpaw Did you add enough Palladium?
Dustin McLean
That wasnt shown in the video!
Did you turn it off and on again?
Ce Tee
yes! Several times! I even unplugged the modem and router too!
did you try to turn it off then on again..?::
ok did you try playing card games with someone?.::
will that usually works....
hmmm.....did youuuu..did you try to call a someone to fix it?.:::
will fuck it and get a new one god damn it
why am I even watching this I'm a clumsy fourteen year old
oh my god same
B
Me too
Me three
hey another clumsy 14 year old!😂😂😂😂
You should specify that its the MK I, "Proof that Tony stark has a heart"
WarMachine216 That's true, I forgot to mention that.
DO IT NOW PLWWWWEEEAAE...
im weird now
Dustin McLean Can you try to make a FLUO future weapon like Lucas Bishop in the film X-Men: Days of a Future Past?
Francesco Cocchiara
apkd
Dustin Mclean was able to build this in his house, with a box of junk and some stuff he got at the hardware store
I thought this was a hacksmith video for some reason.
Same
Don't worry ME TOOOOOOOOOO!!!!!
me too xD
XD
still waiting for him to fly like a mf...
Make the Doctor who's Sonic Screwdriver
Yes
11th doctor please
But you can get those in stores. It would be cool if he did but I think he's focussing on iconic props which you can't see in stores. But good suggestion.
Yes very good idea
MrAltje I'd prefer 10th
Make a Pip Boy from Fallout! That would be awesome.
Not working, tried to power up my pc with it. Totally waste of 30 bucks -.-
+Pan Severus XD
+Pan Severus you realy made my day bro :D
=]]
that would destroy ur PC, when you book your next flight tell them to power the plane with it
Mine is powering my entire house right now, you must have a wire crossed.
I don't watch to make these things (that would be impossible), but I am fascinated by the talent.
infinity orb from guardians of the galaxy
did youtube just update?
Pipdockan Their video player, yeah.
Pipdockan looks the same to me
Behemothokun Yeah it did
1:04 just like where Tony went in iron man 3
That's great, needs a bit of an ice blue glow though.
kdk
you could wire a relay in by itself to rapidly blink and then you add some glow in the dark in a couple of areas so it could look like some areas to looks like it dimming when other parts just go dark
When I made my latest arc rectors, for the light ring I took clear 1/4 in Plexiglas and took a circular drill bit and cut out a hole, then went a couple bit sizes bigger and cut out the ring, then I used my dremel to sand it down and make it opaque and murky, my latest arc reactor, I drilled in 1/2 way into the ring in several areas and inserted 3mm LEDs and wired them all in parallel
Would be great if you could list all the items needed in the description. Could you do that, on this episode and the rest, please?
There's too much glue.
Yah I thought the same thing
I'm following your instructions so closely that I'm aware that the parts can be found at Home Depot!
for the tube.. if you want to bend easier use a heat gun and warm it up a little until i gets pliable. instead of hot glue use CA glue, its super thin and drys in 20 sec. Ive used CA glue as a coating because you can polish it up and make a glossy hard to scratch finish.
"TONY STARK WAS ABLE TO BUILD THIS IN A CAVE WITH A BOX OF SCRAPS!"
great video! can you make a batarange from arkham asylum/city/knight?
Please. Make a Corvo's Mask from Dishonored...
You should make John Hammond's cane from Jurassic Park
Omg this man used to do homemade movies 🥺
I used to watch only if Dustin was the one crafting. This is soooo goood
Make the Pip-Boy 3000
guys you are playing with Tony Stark's heart😷
sagar kella
he you fool that's not his heart it is used to control the electro magnetic force to stop peaces of the boom
Make a PipBoy 3000 from fallout game please (fallout new vegas, fallout 3 and 4)
I Loved This.. I Have Seem Some Others Before.. But Your Idea Was The Best.. I Will Be Making My Own In 2016.. {After My PaceMaker Upgrade}.. I Have Always Said.. I'm Like (IRONMAN) Just On A Smaller Budget.. This Is Awesomeness.. Thank You Very Much..
Now this is the best kind of DIY
LOL THE NEW RUclips
I've been Dustin so now my room is Mclean (say it outloud
WolfieVids NerfMods & More
Ben 10 omnitrix or Capitan America shield
if you want to avoid all the hot glue over the place (a lot of people commented that it decreased the projects value) you could use another foggy tubing that is more pliable, or you could use super glue instead of hot glue, or you could use a hot glue stick, shave it down a bit to be thinner, then put it in some warm water to make it more pliable, then glue it to the arc reactor (just some ideas)
Really like the effect at 7:06, nice one!
Ok you got the end product but you didn't exactly show us very well hit to make it
Iron man is the movie about harry potter having to fly in The enterprise to blow up the death star to defete saroman right?
Yep, 100%
to destory the evil Ewoks created under the evil lord SubZero and his minions Superman and Batman 😂
I always keep all packaging.
Hoarder?
Depends:
Special editions of games? Not at all.
Plastic of something of the hardware store? Depends (again):
If you haven't stuffed your house full of it, so your house basically won't be "lifeable" anymore, then nope.
Tactical Ultimatum Not if he has an actual use for it
_Savantis _ I meant for light fittings and such
SuperSMT That's what all hoarders say :)
Tactical Ultimatum Notice I said _actual_ use...
Who still remembers the circular arc reactor? I'm so used to the triangular one now :)
TONY BUILT THIS! IN A CAVE! WITH A BOX OF SCRAPS!
Dead Scientist of the year: Well I'm not Tony Stark
Under the 310 club
Smh
310 club doesn't exist mate.
Do the spy's arsenal from tf2
Yah do that
C'mon give him a break he tried to make it really good. I say he is the real life tony
Nice work DUSTin mClean....future Tony Stark for sure .
it looks so real😲
built a ironman suit
*make a mark 1 arc reactor
Not make an arc reactor
KiKi 😅
Carmen Garcia ??
Halo halo halo halo
please make a web shooter
Joshua Williams ???
can u make a Ben 10 whach
This was pretty awesome. Also the TMNT Ooze canister was absolutely BOSS!!!!! #NeedIt
Awesome Did you make the thor hammer yet
webshooter
Make a cyclops goggles
"Goggles"...I take it you don't read the X-men comics.
google translate kullandım
is your girlfriend Australian???
Tim Jakub Haha no but she does sound like it now that you mention it!
Dustin McLean really good job.
+Dustin McLean will nyou ever at least geust star on homemade movies? please. please, after all, you started it all
I guest starred as Indiana Jones! And reprised my roles as Tony Stark and Haymitch. I'd love to be in more, just waiting to be invited :)
Dustin McLean well yeah, but we miss you man!
Woah awesome vid and God Bless!
This was rather fantastic. I have to say, though, I was hoping you'd make it so we could wear it under a shirt or something. I guess that's what imagination and work is about! Call me inspired!
that looks terrible.
+kaarl m lets see you make one buddy
Proof that Tony Stark has a heart.
the funniest part 7:17
JK i hypnotized you, now you will like this comment
Your videos inspire me love them👍
Amazing diy bro 😊
You should give that to Tony Stark, bring him back to life!
That is awesome! Just found this an thought it was great! Cheers for that!
Dustin the ground,dustin the desk, dustin everythin i can find.
Nice! I am also making Iron Man 3D models and finished mark 1 arc reactor
"Tony Stark was able to build this in a cave! With a box of scraps!"
"Dustin was able to build this in his living room! With a bag of parts from the hardware store!"
good job it looked very nice
If you shot a selfhealing would it heal itself?
Would love to see you make a T-Virus container from Resident Evil, I'm sure you would do a great job.
hey thanks for the help I already have the whole alien suit and he flies but all I need is that look like it has a plug inside of a few typos that and have to fly
Proof that Tony Stark has a heart
fantastic work there but it would be very helpful if you could tell me how to make a full Iron Man suit
I've done mine as just a bright white disc built into the armour! 🤖
amazing work dod
AWE WAS ABLE TO BUILD THIS AT HOME! WITH A BOX OF SCRAPS!
You can use a dremel tool to cut metal it just flies sparks out
Looks great! Can you tell me what size tubing you used for the perimeter? I seem to be having a hard time getting it the same diameter as the strainer and thg tubing kinks.. Thoughts? Thanks so much!!!
Hey Dustin, I am gonna make a replica of the broken component in S5-17 of Agents of shield. And I have to make a light source that is in front of that component. I seems pretty the seem light source of the arc reactor. What is your insight?
Heat the tube with a hair dryer and it should mold a little easier. Once it cools it should hold it's new shape.
Dustin where did you get your iPad case ? I want one like it
So how do you install it on your chest? Does surgery have to be required?
Super cool!👍🏼
Dustin, how did you mount the top black grid into the reactor. Was that hot glued as well?
Beautiful
How did you get the 3D blueprint of that arc reactor on your tablet? I'd love that so I can use it to build myself one!
+Kael Zildjian It's an image :D
you can go to any pharmacy and get IV tubing which is similar in size and much more easier to form a circle and it looks actually cooler lol