C5 Corvette Chin Track Days - VIR Full Session Blue #3

Поделиться
HTML-код
  • Опубликовано: 24 окт 2022
  • Chin Track Days at VIR October 17th, 2022.
    Blue run group. Third Session on Monday.
    Due to weather and black flags, I didn't see much time on track but did get a good 15 minute run in after lunch.
    Car is a 2004 Corvette Z06.
    Engine: Lots of reliability mods. No power mods.
    Suspension: Stock leaf springs, T1 sway bars, Bilstein B8 shocks, delrin control arm bushings, poly shock mounts, SKF Race hubs. -2.6/-1.5 camber
    Brakes: AP Racing CP8350, 325mm rotors front and rear. Ferodo DS1.11 pads.
    Wheels/Tires: CCW C14 18x10, Pirelli P-Zero DH Slicks(scrubs) 285/645/18 front, 305/660/18 rear.

Комментарии • 24

  • @408CIDZ
    @408CIDZ Год назад +8

    Getting the wave by from the ZL1’s was 👍👍👍

  • @fritzmeynejr2983
    @fritzmeynejr2983 8 месяцев назад +3

    Wow, impressive. Great job! Watching your tach and MPH, you are very consistent!

  • @josephgunter2563
    @josephgunter2563 Год назад +5

    Well done .aggressive but respect to others out tracking too!

    • @hnel_on_track
      @hnel_on_track  Год назад +2

      Thanks! Chin as a group has pretty good drivers. I felt comfortable with the other folks on track and pushed pretty hard.
      I would not have been as aggressive if I was out with another group besides Chin.

  • @shawnmatzinger6326
    @shawnmatzinger6326 Год назад +1

    Thanks

  • @jeffsenecal4168
    @jeffsenecal4168 Год назад +2

    Great run!!! This is y I got one of these superb!!

  • @reginaldsmith8197
    @reginaldsmith8197 6 месяцев назад

    Good job

  • @427Nut
    @427Nut Год назад +1

    That's a good time with or without traffic 👍

    • @hnel_on_track
      @hnel_on_track  Год назад +1

      Thanks! Circuit Tools shows 2:05.09 with an optimal of 2:04.05 for that session... dipping into the 2:03s may be possible next time out.

  • @loldhanu1
    @loldhanu1 5 месяцев назад

    Sick dude! What was white golf thinking 😂😂
    Those kinda dudes are left lane hughers

  • @erlegree
    @erlegree 6 месяцев назад

    Solid Run. I'm putting together a 02 Z06. It seems like your mod list will be very close to what I am building. That AP Brake package is amazing
    . Thanks!

  • @thestaginglanes4147
    @thestaginglanes4147 Год назад

    Great driving! You are really moving in that C5Z!

    • @hnel_on_track
      @hnel_on_track  Год назад

      Thanks man. I'm pretty sure you were out at Fall Fest in the same run group as me when I put my C5 in the tire wall in the lower essess.
      Can't wait to get the car fixed and back on track.

    • @thestaginglanes4147
      @thestaginglanes4147 Год назад

      @@hnel_on_track I sure was. I was sorry to see the car off track. I'm glad to see she's almost ready again. I hope we both get out there together again this year 💪👌🏁

  • @shawnmatzinger6326
    @shawnmatzinger6326 Год назад +2

    Are you happy with the ap brakes?

    • @hnel_on_track
      @hnel_on_track  Год назад

      I am happy with the AP brakes.
      I have struggled matching pads/tires but feel good about the Ferodo/Pirelli combo I have now.
      It’s possible to go plenty fast with the stock C5 brakes but you’ll spend a lot of time working on them to get max performance.
      Kits from the big names(AP, StopTech, Wilwood) take that hassle away.

    • @shawnmatzinger6326
      @shawnmatzinger6326 Год назад +1

      Which pads have you landed on? I am putting on the same kit on at this time was going to go with the 3.12 pads and A7 Hoosier tires.

    • @shawnmatzinger6326
      @shawnmatzinger6326 Год назад +1

      I am doing brakes al 4 corners. Any thoughts or ideas let me know.

    • @hnel_on_track
      @hnel_on_track  Год назад

      I ended up with DS1.11. I went this direction as I had a ton of ABS activation with other pads.
      I just recently put a CP8350 kit on the rear too. Ferodo pads in the stock shape are just stupid expensive. Probably wouldn’t have switched to Ferodo if I hadn’t also upgraded the rears.
      I like that the 8350 kit can use stock C5 front rotors and that it uses the same pads front/back. Simplifies the spares setup.

    • @shawnmatzinger6326
      @shawnmatzinger6326 Год назад

      Thanks

  • @tjlarson8150
    @tjlarson8150 Год назад

    what mods you have done?

    • @hnel_on_track
      @hnel_on_track  Год назад

      I've got a short mod list in the description and a more detailed explanation here:
      ruclips.net/video/XGpDVD1E488/видео.html

  • @3SOULENT
    @3SOULENT Месяц назад

    Tf was in that Volkswagen? 😂