I experienced something else. When the pool was brand new (25 yrs) we had a great pool opening party. When it got dark, I turned on the light. From a distance it looked great. Sitting next to the pool, every tiny or big flaw in the floor was very visible including a size 15 footprint. Plus, bugs came from miles away.
Hi Steve thank you for the great tips. I have a question. Should I try to reopen a pool that was closed with Holes drilled in the bottom for water drainage at the drain and filled with sand or just replace it with a new one ?
bought this house built in '91 with pool and no light. neighbor has pool with light and bought many of the same parts and has taken a 2nd mortgage trying to keep it working. safety? with the house adjacent with multiple lights? want to swim at night without a light? have someone outside of the pool observe you while you swim
Hi Steve. Any chance you could do a video on pump service factor, relating the nominal horsepower on the pump specification plate (service factor included and not included) back to specified watts, amps and voltage? Is this just one more thing “they” don’t want you to know?
Are you familiar with the new WEF ratings? These help to level the playing field a little versus hhp, hp, thp etc. Amount of water pumped (in thousands of gallons) for 1kW of power consumed over an averaged spread of different RPM values.
the pool i got with the house did burn out frequently. however after i replaced the 500 watts with the cooler 50 to 100 watt led lights they seem to last longer.
That’s interesting.. I don’t live in the USA. However..my pool doesn’t have lights… but I always wanted them… so we put up a floodlight. Problem solved. I can see the bottom as my pool is light blue/aqua and it is fun to watch the bats swoop over it to catch mozzies or other flying beasties at night - either whilst in the pool or from the balcony! Much safer and probably less expensive!m😊
This was my experience right after a 140k pool remodel; They have never worked properly! If it's a safety requirement they should come with excellent warranty & service.
Hey Steve! Is there a reason we don't see pool lights that run along the wall of the pool? It seems like that would be easier to replace and less likely to introduce a leak. I'm not going to be able to get a pool in the near-term, but I appreciate your videos for learning all I can about them ahead-of-time!
That seems like a good idea. A low voltage, low current led strip under the coping would be nice. No leaking and safe. Do you think it would glare off the water?
How about floating lights the project light down into thewater? My lights only lasted two years and the replacement quote is around $1000-$1600. I can’t be spending $1500 every 2 to 3 years on lights. that also includes my transformer that went out.
I use a 120 volt light, after 25 years I had to replace it. It's ground fault protected, so it is safe. I am on my second bulb, but that is a 55 year span.
Big fan of S.P. Steve, but not of the idea of hi-voltage lights in pools, regardless of the code requirements to include these. The potential for electrical issues, especially as these fixtures age or are neglected, adds an unnecessary safety risk. No idea how many, but certainly some people have been electrocuted. Gfci's can fail, rubber gaskets dry-out, and decay, chlorine and salt eats away at metals, and some electricians and pool builders do shoddy work. I'll light my pool using low or high voltage outdoor fixtures mounted on the house or a mast, tree, post, etc, to strategically light the pool basin, with significantly reduced risk of 'electricity/water/swimmer interaction' problems.
Who said anything about high voltage? Pool lights are low voltage. That is why pool builders install the light and an electrician installs the transformer and connects power. Yes some builders do shoddy work and that’s why you don’t want the cheapest you can find. When done right there is no danger, just shitty plastic components that are easily broken.
I experienced something else. When the pool was brand new (25 yrs) we had a great pool opening party. When it got dark, I turned on the light. From a distance it looked great. Sitting next to the pool, every tiny or big flaw in the floor was very visible including a size 15 footprint. Plus, bugs came from miles away.
Thank you. Do you have suggestions for lights in an above ground pool?
Hi Steve thank you for the great tips. I have a question. Should I try to reopen a pool that was closed with
Holes drilled in the bottom for water drainage at the drain and filled with sand or just replace it with a new one ?
bought this house built in '91 with pool and no light. neighbor has pool with light and bought many of the same parts and has taken a 2nd mortgage trying to keep it working. safety? with the house adjacent with multiple lights? want to swim at night without a light? have someone outside of the pool observe you while you swim
Hi Steve. Any chance you could do a video on pump service factor, relating the nominal horsepower on the pump specification plate (service factor included and not included) back to specified watts, amps and voltage? Is this just one more thing “they” don’t want you to know?
Are you familiar with the new WEF ratings? These help to level the playing field a little versus hhp, hp, thp etc. Amount of water pumped (in thousands of gallons) for 1kW of power consumed over an averaged spread of different RPM values.
On traditional style fixtures (replaceable bulbs) do recommend using lube on the lens gasket or to put them on "dry"?
the pool i got with the house did burn out frequently. however after i replaced the 500 watts with the cooler 50 to 100 watt led lights they seem to last longer.
Good to know it is a safety standard, I don't have a pool yet, I'm still in the dreaming of stage.
It looks good 😭
That’s interesting.. I don’t live in the USA. However..my pool doesn’t have lights… but I always wanted them… so we put up a floodlight. Problem solved. I can see the bottom as my pool is light blue/aqua and it is fun to watch the bats swoop over it to catch mozzies or other flying beasties at night - either whilst in the pool or from the balcony! Much safer and probably less expensive!m😊
😂In 55 years, I have replaced my underwater light only once, I guess I'm lucky !!!
This was my experience right after a 140k pool remodel; They have never worked properly! If it's a safety requirement they should come with excellent warranty & service.
Wow they ripped you off sue them
I have the old school Jacuzzi Q500!
Hey Steve! Is there a reason we don't see pool lights that run along the wall of the pool? It seems like that would be easier to replace and less likely to introduce a leak.
I'm not going to be able to get a pool in the near-term, but I appreciate your videos for learning all I can about them ahead-of-time!
That seems like a good idea. A low voltage, low current led strip under the coping would be nice. No leaking and safe. Do you think it would glare off the water?
How about floating lights the project light down into thewater? My lights only lasted two years and the replacement quote is around $1000-$1600. I can’t be spending $1500 every 2 to 3 years on lights. that also includes my transformer that went out.
I use a 120 volt light, after 25 years I had to replace it. It's ground fault protected, so it is safe. I am on my second bulb, but that is a 55 year span.
One of my LED lights is blinking on and off. It's only 2 years old.
that means it's broken. Two of mine did the same before they went out.
Big fan of S.P. Steve, but not of the idea of hi-voltage lights in pools, regardless of the code requirements to include these. The potential for electrical issues, especially as these fixtures age or are neglected, adds an unnecessary safety risk. No idea how many, but certainly some people have been electrocuted. Gfci's can fail, rubber gaskets dry-out, and decay, chlorine and salt eats away at metals, and some electricians and pool builders do shoddy work. I'll light my pool using low or high voltage outdoor fixtures mounted on the house or a mast, tree, post, etc, to strategically light the pool basin, with significantly reduced risk of 'electricity/water/swimmer interaction' problems.
Who said anything about high voltage? Pool lights are low voltage. That is why pool builders install the light and an electrician installs the transformer and connects power. Yes some builders do shoddy work and that’s why you don’t want the cheapest you can find. When done right there is no danger, just shitty plastic components that are easily broken.
Pentair Aqualuminator's for above ground pools are junk.
this video was fairly useless