Curious, how is the ergonomics of reaching the windshield and turn signal stalks with the hub + quick release? Or do you think it's much more natural with just the hub?
@@Echizen32kMedia it’s great my only thing is that I’m short and sit close to the wheel and the closer you get the lower the wheel is to your body ..and my current seat setup is a little bit higher than stock . I think a shorty hub and a quick release would be the same length as the standard hub though
@@christianherrero8053 Thank you sir! I will try the 537 first to see how it goes. Are you 5'6 or 5'7? I'm 5'10 so if we are the same height, I was thinking about something similar setup wise.
Hi I bought the works bell kit. I tried to wire the horn using the positive and negative wire from the clock spring but it doesn’t work. The horn only works if I wire the positive wire to the horn and then make a negative wire that grounds to one of the screws on the hub. This drains my battery though. Am I doing something wrong?
I'm curious, with this hub, do you need the extra thickness of the quick release? I have this hub for my 01 Spyder (not installed), but don't have a quick release. Will the steering wheel be too far from you/close to the dash without the quick release or some kind of spacer? Thanks!
There is a pin tool or u can just cut and hardwire it. There is a lock u unclip on the connector as well. It's off color yellow. Not the same as the rest of plug
Please send me the link to where you ordered everything u used? I did a steering wheel change and had to put it all back to oem cause everything went crazy! This video made everything look so easy to do,thanks!!!
im just tryna give an option to people that gives them these benefits without the price tag. why is comment getting deleted 🙃. NRG hub for FRS/BRZ and a dremel around where the clock spring protrudes. you get to keep horn and clock spring and it looks really clean when done.
Авто/Мото
![WORKS BELL QUICK RELEASE & LOCK INSTALL | #OMGMIATA | EP86 | [4K60]](/img/1.gif)
Ah the ancient language of JDM
Looks great! Will consider.
Definitely getting this exact setup
It looks so good
Great work
WOW!
Scotty Kilmer 🤜🤛
Noice
Fudge, I wish i knew this sooner.
lmfao i thought i was having a stroke with that scotty k clip
Staff over at NRG gonna be disliking this LOL. Great video!
2:17 lmao
REV UP YOUR ENGINES
scotty would love the intro to this vid
Couldn’t stop laughing 😂
Curious, how is the ergonomics of reaching the windshield and turn signal stalks with the hub + quick release? Or do you think it's much more natural with just the hub?
What did you do with the airbag loop on the existing plug?
nice i have the standard 537 hub on mine... thinking about getting a quick release to use with the standard hub to bring the wheel in close to me
How did you like this setup? I am thinking about the same thing and currently have the 537 hub.
@@Echizen32kMedia it’s great my only thing is that I’m short and sit close to the wheel and the closer you get the lower the wheel is to your body ..and my current seat setup is a little bit higher than stock . I think a shorty hub and a quick release would be the same length as the standard hub though
@@christianherrero8053 Thank you sir! I will try the 537 first to see how it goes. Are you 5'6 or 5'7? I'm 5'10 so if we are the same height, I was thinking about something similar setup wise.
Hello quick question brother, can I use an nrg quick release with the bellworks hub ?
Hi I bought the works bell kit. I tried to wire the horn using the positive and negative wire from the clock spring but it doesn’t work. The horn only works if I wire the positive wire to the horn and then make a negative wire that grounds to one of the screws on the hub. This drains my battery though. Am I doing something wrong?
350mm in the smol car?
you went from stock wheel diameter to 300 to 350mm. Curious why switching back to larger wheel?
whens that Crooober sponsorship comin in
You forgot to rev up your engines Scotty!
I'm curious, with this hub, do you need the extra thickness of the quick release? I have this hub for my 01 Spyder (not installed), but don't have a quick release. Will the steering wheel be too far from you/close to the dash without the quick release or some kind of spacer? Thanks!
That's subjective so it's up to u. They sell spacers or u can get a dished wheel
@@TougeTime Right, but any idea how close/far away your setup is compared to stock?
how did u depin the yellow connector? having a hard time getting the wires out
There is a pin tool or u can just cut and hardwire it. There is a lock u unclip on the connector as well. It's off color yellow. Not the same as the rest of plug
Instructions in JDM 🤣
moonrunes.
Please send me the link to where you ordered everything u used? I did a steering wheel change and had to put it all back to oem cause everything went crazy! This video made everything look so easy to do,thanks!!!
It is mentioned in the video where I bought everything
uwu
im just tryna give an option to people that gives them these benefits without the price tag. why is comment getting deleted 🙃. NRG hub for FRS/BRZ and a dremel around where the clock spring protrudes. you get to keep horn and clock spring and it looks really clean when done.
So thats why my barebones momo hub was so cheap :|
I believe momo actually has a recall for safety.
😝 Promo'SM.
fukada review says good video however not enough tiktok dings
Great work