How to Program a Craftsman Garage Door Opener Remote
HTML-код
- Опубликовано: 17 окт 2013
- www.growsomethinggreen.com/
In this video I teach you how to program or reprogram your Craftsman garage door opener remote. It is fairly simple and you can do it in about a minute. Hope this video helps! 
Хобби
Thanks bro. 7 years later and still helping.
WOW. This is AMAZING. We seriously sit in front of the garage and press the remote 10-50 times before it would finally go up or down. Just followed your guide and up and down it goes! Thank you!
Easy and direct.. thank you! RUclips is definitely the ultimate owners manual! Nicely done!
Thanks....other videos did not show all parts involved in programming and yours did. I"m a visual learner and your video allowed me to do what I needed to do!!
Thank you so much for posting this video!! I lost the manual and was at a loss at how to reprogram my remote when I changed the key code. I didn't realize it was that simple! Thanks again!!!
Your the man after all these years this thing is still kicking! Thank you.
Thank you! Worked like a charm. We've been doing some home remodeling so our garage was full of supplies for that remodel and we parked on the driveway. Haven't used the opener in about a year. Winter is coming so we wanted to start putting the car back in the garage but the garage remote didn't work. It does now!
Thanks so much. Just moved to a new house and needed to change everything. You're my hero.
Thank you for your instructions. I found two extra remotes that I can use in other vehicles and found your video to be just what I was looking for! Great Job!!!
I read the instruction manual that came with the remote and followed it carefully... 5 times. Then I turned to the internet. The manual is completely different to the instructions you gave me. Odd but it's working now 🙌🙌🙌
Yes...success!!! I literally spent two days trying to figure out the buttons and instructions that came with my new remotes. Thanks so much!
I have the same garage door opener and remote. This is NOT how the owner's manual says to do it. It is also NOT how three other RUclips videos (by garage door opener "professionals") say to do it. After struggling with these off and on for months, and finally giving up, today, for the first time in two years, ALL of my garage door opener remotes now work, and they all work on both doors! I can open either door from inside either car, or from inside the house!
It took all of two minutes.
THANK YOU SO MUCH for posting this.
There is nothing worse than having to get out of the car in Michigan when it's -20*F to open the freaking garage door. You just made my winter!
:-)
Thanks for the great comment! I'm glad this finally worked for you!
Yes, I agree, too, I am in Michigan as well.
Hi there I’m home now I’ll call you
I have the same story, but this still didn't work for me....Have two Craftsmans one works one doesn't...both were working fine, then one quit! Pissin me off!
James Salango
1. Have your remote handy.
2. Push the big red button on the back of the opener.
3. Push the button on the remote within a few seconds.
The light on the opener flashes and you're done.
You can synch several remotes to each opener.
Thanks so much for sharing your knowledge! I actually called a garage door company for instructions and they wanted to send out a tec for $119 service charge. All it took was watching your video, which I chose because it was less than a minute and a half. That's about how long it took to get the job done. You're the best!
Thanks so much for a very SIMPLE solution to fixing my remote. I have the same model remote and door opener you have in your video. For some reason my remote suddenly stopped working, and after changing the battery, it still didn't work. Found your video, followed your directions, and it WORKED! Thanks so much!
Thank you so much for this video. I've been at it for three months to make this happen. I've ask the neighbors, my dad and nothing. I saw this video last night. My garage door opener is now working in less then a minute. Thank you again. GOD Bless you!!!
Awesome, glad this helped you!
Thank you thank you thank you! This old lady with bad knees has been trying for 2 days to get mine going again after I changed battery. Got up on step ladder and couldn't read small print. Out of desperation I googled my garage door opener brand and I was lead here. Followed instructions and voila it works. Getting in and out of car with my replaced left knee healing to manually open and close garage door was getting old. So thank you again kind sir!
Glad this helped you, take care!
I cannot thank you enough... Moved into a new house and only one of openers were working.. My wife nagging me to get new ones, went online to buy them and then out of curiosity found this video. You saved me time and money THANK YOU!!!!!!!
Quick, easy AND accurate!! Thanks so much!
Thank you so much for teaching me to program my remote control, it's very easy with your help.
Very simple process as you indicated, however, the part when you mention the green light coming on after pushing the red button on the garage door opener saved me a lot of time, because, it didn't come on the first few times I tried it. After watching your video, I reprogrammed all three of my remotes within issue. Thank you.
Another thank you, incoming! My son changed the light on my garage door opener and inadvertently reset my remotes. I thought the batteries had gone dead and it took a few days for me to track down some replacements. Imagine my surprise when the new batteries didn't bring my remotes back to life. We get pretty spoiled by these things so getting in and out of the car to punch the key pad every time I left or came home was starting to really annoy me. Anyway, I decided to find a video that might help me in case i was putting the new battery in wrong or something. Well, voila! Your video helped me figure out that there was nothing wrong with my remotes that a simple re-programming couldn't cure. Thanks for posting this very helpful video!
Thank you. This was very helpful. Thanks to your help, I took care of the remote right in time, before the winter weather
U are a lifesaver!!! The directions that came with the remote was bunk.. i watched ur clip and on 1:38 minutes my garage door was resurrected from a a deep deep 7 day COMA!! THANKS BRUTHA... CHEERS
You made my mom happy as a clam at high tide. Thank you!
One of buttons didn't work well on my remote so I switched the operation to another one of the three available. Couldn't figure out how to program till I saw this video. Great tutorial, simple to program. Took less than 10 seconds. Thanks.
High 5! Changed the outdoor keyless entry pad and then had to change the car remotes too. I have the same garage door opener so this was great to get this how to video to help me out.
Thank you SO much. Your video made this easy! Both remotes had stopped working when I tried to program a new keypad. Simple and GREAT video!
Thanks! This was a huge help and it saved me a lot of hassle. Thanks for making and sharing it.
Great video. Never thought it would be that easy!
Thank you for posting this. As others have said, the directions included with the product do not work, but these directions worked for me.
This video was soooo easy to follow. The instructions on the opener itself were confusing. Thanks!
Quick , easy and simple. Thank you very much
Perfectly explained fix!
Thank you!
You just saved me $100, I love this. Thank you for the simple instructions.
Make sure when you replace the battery the positive side is down. Great video. It helped a lot!
Thank you for showing this simple procedure.
Thank you times a million. I was ready to chuck it until I listened to your video. Both old and new remotes now work perfectly.
Thanks a lot it worked for me too thanksX10.
Thanks my wife almost killed me ..you're a life saver
great video all these years I didnt know you had to reprogram
Thank you for this helpful video and for keeping it up on the internet.
Thanks for posting the video. Straight and to the point. 👍
My remote just went out this afternoon! Replace the coin battery did nothing. With your directions, it's back working again. I had never needed to use that button in the 17 years we've had the opener. I also replaced one of the two 60w bulbs -- it had burned out. Thanks for the tip! 👍
Thank you so much! You saved me a lot of time and aggravation, trying to figure this damn thing out.
Thanks, it worked !
I bought my first home last month and the instructions on the main unit are useless. Your video helped.
Man, you rock! Saved me time and probably money too! Thanks so much for the post!
Thank you so much for this helpful video! Now that I can finally open my garage door from my car with my new replacement remote, I feel like I’m living in the lap of luxury!
I know the feeling. My remote died and my new was came with vague head scratching instructions and now it's almost as if I walked back into the 21st century.
Thank you!!! You're awesome!!! Can't believe they had a video on how to re-program a 2002 garage door opener!!! Going to try it now. You R a Rock Srar!!!!!
Great, took me less than a minute. It's way better than another video I looked at.
Thanks.
Thanks for your video. It took all of 2 minutes from start to finish!
I love short videos that do the job.
It worked for me. Thanks so much!!! That's truly amazing!!! I did not think it could be that easy and that fast before watching this video. I am so glad that I have searched via Google and did it through the help of this video. You are awesome!!! and this video is truly a god send! You have not only saved us all a lot of time from searching for an unnecessary universal remote control, reading/figuring out to programing the universal remote control, but also saved us from buying it to incurring the unnecessary expense, when the program or reprogram in this video simplify the whole works that any one can do it if one is willing to find the most efficient way for it to work. Thank god for your video!!! Especially the first one I watched that simplify the whole scope of fixing.
Thanks for your awesome comment! I'm glad this helped so you were able to save money from having to call someone or replace it. Take care!
Thank you so much for this information. It was indeed helpful.
Thanks man! Been fighting this for a long time. Found your video and Bingo!
Thank you. I found one in an abandon car at work and have had it in my tool box for years. My wife lost hers and I put in a new battery and it works perfect.
simple and quick. thanks. way different than what's printed on the opener.
Exactly the info we needed. Thank you!
Thank you for sharing!!! the world needs more of you :)
Thanks! After reading and repeating the instructions on the unit multiple times, I turned to RUclips and fixed it in 2 seconds! Thank you thank you!!
Awesome glad it helped!
ya i did the same thing nothing at all what the instructions said..way to easy thanks for uploading this vid lol
Thank you very much for the helpful tips. Saved me a lot of headaches
Thank you, it was perfect!
For a couple of days I went crazy following the directions printed on the side of the red button, but it
said "press and hold" which did not work. Now following your directions it was a simple as 1, 2, 3.
Worked great for me using a new chamberlain remote. Thanks!
Thank you! I could NOT program the thing on my own. It only took a few seconds - thanks to you!!!
THANK YOU SO MUCH!!! I just could not figure it out and this was so simple! Hurrah!!!
Probably the most useful vid on RUclips. Thanks.
Thank you for posting this! So helpful.
It was that easy 😂😂😂 my mom been asking me to program it, I just did it lol. Thanks
Thanks so much. The fix worked perfectly and you saved me from buying a new one off the internet :)
Thanks, I just followed your instructions, it worked!
Thank you. Rather than waiting on the incompetent rental agency to send a guy out to do this (coming into my house while I'm not home in order to do it, which I don't like), I did it myself in two seconds thanks to this.
Thank you for a really great video. It worked perfectly.
It took longer to watch the video than to program the remote.
Well done. Thank you..
Very nice and clear instructions. Thanks
Thank you! Just followed these directions and voila!!
Thank you so much ! Extremely helpful.
Thank you!! This information helped me.
perfect video for when I needed it. thanks.
Thank you so much for your video. The instruction manual made it appear more complicated that it is.
thank you soooooo much it worked like a charm any tips on the range of the remote
OMG!! Was it this easy?? Thanks bro. Now I believe that "Knowledge is power"
Worked great the 1st time. Nice clear instructions.
Tremendously helpful, thank you!!!
Ty for posting this.
thanks for the video. watched yesterday. helped me out!
Thank you for this video. It was direct and the solution was Fast.
Dude, this is so cool - nice job!
Thanks so much! Such a simple fix.
Thanks friend! Really great and useful video! I fixed mine!
Hi, many thanks for the video. Does the garage door have to be open before you start programming?
WOW. thank you, worked perfect on 1st attempt. very easy explanation.
Thank you for sharing.Very helpful.
Thanks so much. It's always easier with directions :)
We inherited this opener and could never figure this out. Thank you!
Simple instructions and right to the point. Great! Thank you.
Dude your the best didn't have a clue and watched you and did the same and I'm back in business, thanks
Thanks for the direct and directions.
That was easy! Thank you!
Thanks!!!! very clear and simply procedure...
Dude, you're the man, thanks for saving me some cash!
Worked great! Thank you!
Thank you! Worked like a charm. Appreciate you putting up this video :)