Hello Gayle, thanks for sharing your vast knowledge of all things Bernina. I would love your input about using a slippery slider under the small clamp hoop to stop scratching of the throat plate, or is there some other solution you know of. Cheers, Gail from down under.
I hope Bernina puts out a Large clamp hoop ! I love ❤️ 💕 my medium hoop love! A good 12x8 15x8. I have the 770 Kaffe plus and so hopefully in the future Bernina will catch up with larger hoops like Brothers
Hello @Gayle Hoping you might be able to help me. I have a Bernina 770QE Plus and I am getting the following error message Module has an error during movement. Confirm ok to remove hoop or cancel to continue with sequence control. I’ve tried continuing it will do a few stitches then stop again
@@sylviaminter4247 you’re probably missing a rubber foot on either your module or the machine, your table has a sway in it or is uneven, or you haven’t connected the module correctly to your machine.
I found your instructions very helpful and looked at the Bernina website and downloaded the firmware. I am concerned about this part. In general, personal data and settings are automatically transferred during a firmware update. For safety reasons, it is also recommended to save data and settings on a BERNINA USB stick before the firmware update is started. If personal data and settings should be lost during a firmware update, they can be transferred to the machine again afterwards. I don't know how to do that.
Ok. I did call Russel yesterday and he has the small hoop. He said bring my machine in and they'd install. But the 790 weighs a bunch and it's a pain to pack in the car. I'll call him again next week. Looks easy enough to install and I downloaded the firmware.@@BERNINAofNaperville
If you purchase a USB stick from us, and metion in the comments that you want the latest 880 PLUS firmware, we will prep the stick exactly the way you need to load it onto your machine. Here's the link> www.berninaofnaperville.com/products/usb-flash-drive-8g
Thank you so much, I could not make my Bernina 790 plus accept the Medium clamp hoop. Now I know I need a update.
Hello Gayle, thanks for sharing your vast knowledge of all things Bernina. I would love your input about using a slippery slider under the small clamp hoop to stop scratching of the throat plate, or is there some other solution you know of.
Cheers, Gail from down under.
I hope Bernina puts out a Large clamp hoop ! I love ❤️ 💕 my medium hoop love! A good 12x8 15x8. I have the 770 Kaffe plus and so hopefully in the future Bernina will catch up with larger hoops like Brothers
Well the large square that could fit your Kaffe is the medium square regardless.
You are such fabulous Bernina demonstrator Gayle . 💐
I’m so happy to see that you clamp as you called it “across the street”. I do that too😊
Well done Gayle - nicely explained!
Hello @Gayle Hoping you might be able to help me. I have a Bernina 770QE Plus and I am getting the following error message
Module has an error during movement. Confirm ok to remove hoop or cancel to continue with sequence control.
I’ve tried continuing it will do a few stitches then stop again
@@sylviaminter4247 you’re probably missing a rubber foot on either your module or the machine, your table has a sway in it or is uneven, or you haven’t connected the module correctly to your machine.
Thank you 😊
I found your instructions very helpful and looked at the Bernina website and downloaded the firmware. I am concerned about this part.
In general, personal data and settings are automatically transferred during a firmware update. For safety reasons, it is also recommended to save data and settings on a BERNINA USB stick before the firmware update is started. If personal data and settings should be lost during a firmware update, they can be transferred to the machine again afterwards.
I don't know how to do that.
Please visit your local
BERNINA dealer for this very specific question. They are you best resource.
Ok. I did call Russel yesterday and he has the small hoop. He said bring my machine in and they'd install. But the 790 weighs a bunch and it's a pain to pack in the car. I'll call him again next week. Looks easy enough to install and I downloaded the firmware.@@BERNINAofNaperville
I have a Bernina 590. How often should my firmware be updated ?
Whenever there is a new release. Sometimes there are annual
Ones and other times a couple years can paaa
Love this! Do we have to get an update on our machines to use this new hoop?
Yes. I said this in the video. You can purchase a stitch from us and we will put tit on
Thanks for the demo Gayle! Will a firmware update be available for the 830?
At this time there is not a projected date for that release.
do we need firmware for the small clamp hoop if you have the new 790 Pro
No. It should have the correct firmware
Thank you Gail@@BERNINAofNaperville
I don’t see/can’t find, the update for the 880+ to add this hoop. Will Bernina eventually release one for the 880+ ?
If you purchase a USB stick from us, and metion in the comments that you want the latest 880 PLUS firmware, we will prep the stick exactly the way you need to load it onto your machine.
Here's the link> www.berninaofnaperville.com/products/usb-flash-drive-8g
Will this work on the 780, or is that too old too?
There is no firmware available at this time to update the B 780 to accept this hoop
Can I use it on the 630 old?
This new hoop is only for the new BERNINAs
Thank you for the clear explanation!