No Start and no Click - John Deere Mower - My Fix.
HTML-код
- Опубликовано: 11 сен 2021
- One of the options you can try if you are getting the no start along with the no click of the solenoid. It worked for me. I held the key in the crank position while I jiggled with the mower blade engagement. I will pull it out of the dash and try to clean up the contacts.
Хобби
Being jumping mine for 5yrs😂 all the safeties are messed up. Still cuts grass 😊
I took every wire out of my craftsman
Been using a coffee maker switch and push button crank over. Been working for 6 years. Flawless.
I was super frustrated, tried everything. This worked for me. Thank you.
Glad you found the source of the problem.
Very helpful! FYI there's a 20A fuse to the solenoid. It's located right next to the big red wire in this video. I replaced mine and it started right up. Cost me $1.49
Jumping it to get it to start was an awesome trick that helped me learn how to trouble shoot my mower along with a couple other videos
Thank you
Good deal. 😁
Perfect. Replaced my solenoid and starter, then this worked 😀
Rock on! Glad it helped. 😁
@@ArrowItArchery yep, had a loose pto switch connection. Thanks
@@ArrowItArchery what is that switch the blade engage?
@Bryan Mann Yes Sir, it is the PTO switch. If it's engaged (pulled up) the motor won't start. My switch was simulating it being up. Moving it around as I held the key in the start position pinpointed the no start problem.
Just saved me today. Thanks brother.
Working on different model john deere no click no start. It does start jumping the solenoid with a screwdriver. Im just not sure if its the solenoid or the switch. ' edit ' it turned out to be the brake safety switch. I just cut it off & put the two yellow wires together & the other two together eliminating the switch.
Bottom of a beer can across solenoid posts works too 😂😂👍🏻
Just saved the day!!! Thanks
Right on! 😁
Jumping it worked. Thank you!
Thanks it actually worked for me
Play with this while you’re holding that ,sounds logical
I mean, do what you gotta do. Lol
you are a genius ma man... thank you
Glad it helped
Hope this will help me. Thanks for the video. Had a tire go down and killed the mower to get some air. Trying to start it nothing it has a button that is red when you push the left pedal. Dosen't light up
Just hot wire the solenoid with a light switch and ya good
This comment made my day
@@Bobo_endlssstarryskyno worries I got house wire for my cooling fan on jeep same shit right more durable, use to have a quad with house wire and light switch on solenoid turn key hit switch and go 😂 fuck $50 solenoid I ain’t rich
Cool good insight
Why I don't buy green
My meter comes on, no click no crank.
Just wouldn't re-start during a brief break ...
what did you ground the solenoid to.. the frame???
From the positive cable post to the little post beside it.
Interesting.
Can't touch them now,
have to get that 'John Deere technician' out for every damn
thing including changing a tyre.
Did you touch both bolts on the solenoid? Just curious.
Yes Sir, you're just jumping across the two bolts. Make sure your ignitition switch is on if you want it to run when you make the jump.
@@ArrowItArchery Thanks for the reply. I appreciate it. I’ve been trouble shooting my 155c and it’s my ignition switch. Waiting on my new one to get here. Thanks again !
Isnt there a seat safety switch?
Yes Sir, there is. I have a video of a seat safety switch symptom as well.
ruclips.net/video/Omxe0qStuG8/видео.html
u got to press in the clutch slash brake for it to start
Yes. But when you release it, it will die if the seat switch is bad.
@@ArrowItArchery I don't believe we're dealing with seat switch anyways if it's running after messing with the blade raise/lower deal, which side note, what is the name for the lever switch whatever you may have? Because mines bad, still cutting when it shouldn't, trying to figure it out
@Gregory Schulte if it's still cutting when it shouldn't, as if you are disengaging the PTO button and still engaged and blades mowing, I'd be looking into your PTO button. That's not the same problem as this.
Mine has no power whatsoever....mowed with it last night....absolutely nothing now....battery is good...
Does your hour meter come on when you turn on the key switch? If not, and all of your fuses are good, check that the connector plug to the key switch is seated well. Disconnect it, clean the contacts as good as you can, and reconnect it. I try to clean connections like that with contact cleaner spray and scrubbing as well as possible with a toothbrush or something to that effect. See if you get anything after that. 😁
@@ArrowItArchery I tapped on the relays lightly....power came back....gotta figure out which one...
Deck switch
Don't know what that switch below the key is, but on big trucks "No Click No Start" is usually the neutral safety switch.
It's the pto engagement for the mower. Fiddling with it with the key turned as if starting it. It told me that it was that pto switch when it would crank as I fiddled with it. 😁
hmm, so the pto switch?
There’s a fuse solenoid if it’s blown it won’t work and no click just replace it it’s like a 20a fuse then you’ll be good to go
Also is a relay that controls it all. Notorious for going bad
Where’s that relay located… thanks
@lynneakin2737 where the fuse block is. It controls 2 different things. Make sure you have power from seat switch should hear relay click but even then sometimes if the relay is bad it won't start by the key but you can jump it at the starter coil with a screw driver to check to make sure everything else is operational
Damn. Stop shaking
Yep, mower deck was the problem. After trying everything else!
Good deal. Glad it helped.
Problem is it's a Deere😂🤣😂🤣👌
Blown fuse will also cause this issue.
If all fuses are good, this is diagnosing that the PTO switch has an intermittent electrical contact issue by holding the key in the start position while toggling the switch.
So you just touched the starter
I jumped the hot wire to the ground on the solenoid.
That's not a John Deere. That's a Mexican deer
tweeker
Lmao. I was a little angry at this comment, but I can totally see what you gathered from that high speed video. 🤣 It does look like a tweeker video now that you mentioned it. Far from it though. I just jammed all the info into the short to be quick and to the point. 😁