The full story of our turbocharged Kei Truck (Disrespected Timtam)
HTML-код
- Опубликовано: 2 окт 2024
- We Turbocharged our awesome little JDM Tipper. In this hour long episode we cover in detail how we did it
Watch this episode first: • We turbo’d our truck u...
Get some mad merch to wear and support the show: mightycarmods....
Socials (for Kei Truck Spam)
/ mightycarmods
/ mightycarmods
/ mightycarmods
/ mightycarmods
Cost breakdown:
Turbo $150 (or $300 for the better one)
Steam Pipe $35
Steam Bend $20
Intercooler $164
Intercooler Pipes $209
Oil Feed Line Kit $69
Return Hose $10
Silicone Adaptors $80
Thermofan $149
Turbo Gaskets $35
Stainless Muffler $239
Stainless Bends and Tube $180
Total: $1340
Other stuff needed:
TIG/MIG Gas and Filler Rods
Fencing aluminium
Metal angle and flat bar for brackets
Misc nuts and bolts
🔔 Hit the bell next to Subscribe so you don't miss a video!
Also something to note around Mighty Car Mods: we are normal guys and are not trained mechanics. We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy. Talk to a qualified mechanic if you are in any doubt. Some of the products featured in this video may be supplied by sponsors. For a list of our current sponsors please go to mightycarmods.com
![Disrespected Superturbo 'The Honkfiles' [Part 1]](http://i.ytimg.com/vi/qpfJLeRqSiM/mqdefault.jpg)
![We Bought 4 Land Rover Defenders in Africa... #Landy4x4x4 [EP1]](http://i.ytimg.com/vi/wtELv2iefoU/mqdefault.jpg)
![FendiDa Rappa - Clock Dat ft. Shamar Marco [Official Music Video]](http://i.ytimg.com/vi/3NBU8KHdxYY/mqdefault.jpg)
Hope you enjoyed these Kei Truck videos as much as we enjoyed making BOTH versions.. Want to support the show and get some mad merch? Check out: mightycarmods.com/collections/all
First
Yeah the boiiis
hey moog do you have your own channel for music? would be awesome to record some stuff and put it up behind the scene stuff. and show off your studio i would love it and im sure alot of people watching would love it also
That first version was _amazing_ to see. No talking, wonderful supporting music, and you even skipped the usual MCM intro. And yet, you perfectly presented what was going on with the truck. I'll enjoy this long version as well, I expect.
lol should of tried using the small turbo to feed the bigger turbo
“I like turbos”
- Turbo Yoda
We need more Turbo Yoda!
benny and al's cameo made me miss the good old days. i watch both their channels but i still miss the good old days when they were all in the video
Yup
Hopefully when vackseems are more prevalent and we can hopefully knock stuff down they can all get into videos together again.
BUT HOW MUCH DID IT COST?! Price breakdown in the description... doesn't include tools and electricity and timtam packets but gives you a bit of an idea of the stuff we bought from various places to complete the swap. Tuning it will cost some more for ECU and Dyno time but this is a starting point.
Great vid!, wish i could afford to do this myself, ive got a na impreza. i actually found a supercharger kit for it but it'll have to stay a dream, Stay safe from Perth!
Put in piggyback..haltech standalone is expensive
"How much did it cost?" More then its worth,but if Marty gets to enjoy it and gives us 2 great videos, its priceless.
Toyota Previa, boost from below.
Probably less than buying a timtam on amazon in the u.s.
TurboYoda may not be a man of big words, but he is the true TurboJediMaster.
GAGAGAGAGAGA! I will now count to 3 and then I am still the unprettiest RUclipsr of all time. 1...2...3. GAGAGAGAGAGA!!! Thank you for your attention, dear qha
Whats a bigger word then BOOST!?
@@jahraizer250 nitrous 😂
@@jahraizer250 VTEC 😆
@@jahraizer250 CUBES
Send the boys at bad obsession some mugs, so they get a tea power boost to finish binky 😅
MAKE THE NOISE!
Ah, these two.... =D
"Binky will have no Turbo" - AL spits tee he Drank out og a BOM Mug.
I think the boys are afraid of everyone leaving when the final video is done.
You may be in luck. They posted an update today with a jug of race fuel, seems like they're finally going for a start, video soon 🤞
54:25 thats the second fart i've heard this video. Keep it up
Another man of culture 🙌
when was the first one?
I thought I would be the only one to notice! Glad I'm not! Lol 😆
That was the flutter they were talking about.
Nice Easter egg
Just wanted to say thank you Marty and moog and ALL of MCM/Unicorn Circuit. I reached out for donations as a classroom teacher and they were happy to help. Keep in mind in in the middle of the USA in Indiana. Thanks MCM, I’ll email a pic of the class later!
If you can find us a 2016 S510 KF-VE ECU pin out we'll send you a free shirt
Also m.facebook.com/KelabPenggunaEfrl/posts/diagram-ecu-efdet/971731856335782/
The first video with the artsy shots and music was really well made and looked pretty, but personally I enjoyed this one much more. All personal taste, but to me the build process is much more interesting than the finished product.
something for everyone
@@mightycarmods true, and keep it up, you guys have consistently provided us viewers with some of the best car content on the internet for many years now.
Try drifting it once you're done. I promise it won't roll on you......
Sammit that was the funniest thing I have seen in ages! ✌
LOL - they actually drift , well on dirt ...... remember the one Taku's mate has .... but yeah funny as too see you watching MCM and actually dropping a comment
Sammit.. buy a pair of rwd wheel (1pair wider than the other pair) and put the wider pair up front... It help stabilized the van...
Ive drifted my old work daihatsu hijet kei-truck back then...pretty fun
*Flips it* Rodnock luck dude.
It wont flip if theres wheelspin but why would you
"I just saw the biggest spider", bro, your country has them the size of buckets, lol
I love the disrespected videos, it's like "zen car mods" content. This series has been excellent!
I broke up with my girl and it was like an emo moment lmaooo 😂
just what we needed for this shitty lockdown, an hour of mates having fun with a turbo kei truck.
Still in lockdown?
@@martianweed089 Australia is
if only us leadership hadn't put profits over people, we might be okay, but the us population has become a pool of variants due to the continued nonchalance.
@@sonicmoth8340 jidf moment
@@TemperatureHot thats a strong projection there, wannabe antisemite. if you're gonna it, say it with your chest.
Notwithstanding his modesty, I would say that Marty is a pretty good fabricator!
Producing this in both filming styles offers us viewers a lot of insight on not only what it takes to turbo a kei truck, but also what it takes to document the experience. Thanks for continuing to give the internet some truly excellent content, lads!
I love that after all these years you guys still put so much effort into your videos and builds ✌
I fuckin love when you guys talk about the filming process and camera gear.
I have that 5D4 camera and Samyang 35mm f2.8 lens - it works. Do you notice the judder ? This video was uploaded to youtube at 25fps, and being played back on my 60fps tablet (most phones are a,so 60fps). The 25 to 60fps conversion is causing judder. RUclipsrs should always film and upload in 30 of 60fps.
On desktop all the lower res re-encoded versions do actually play at 25FPS.
I like this format, quick little video of the entire process followed by a longer detailed video I can skip through.
Please please please the tuning part of this guy's would be the icing on the cake!!!!
Boys that last episodes was one of the best I've watched on the tube. Ever. Respect.
Got the perfect turbo sitting im my garage. TD025t0.5m. Designed by mitsubishi for a 1.5 engine. You can have it if you want to come & get itl
Marty, your welds are looking so good! Nice to see the progress over the years.
I really like this new parallel video format! I've been wrenching on cars for years now and knew pretty much everything you were doing without the explanation and voiceover, and it was refreshing to have a chill video with only music. But something was missing. You captured exactly that in this video, kudos!
That informational aspect rather than straight entertainment.
Hey, something relevant; the RHB31 is factory fitted to first gen Cappuccino's! the RHF3 is the same frame size but newer and better designed (RHF vs RHB), and a "big" turbo upgrade is a RHF4 which is the next frame size up.
Nice! I enjoyed the 10 minute version, I'm going to enjoy this even more! Thanks guys!
why not both is the meme of choice here!
When the engine blows up this needs a k swap or pd130
@@mightycarmods why not both turbos?
@@guylishman3209 You spelt Rotary wrong!
Nope definitely said k swap or pd130 correctly, rotarys are good engines and that but only when they work and they go rong a lot and require a lot more maintenance and parts are even more expensive and hard to come by 😂
Ay lads, any chance of making a metal mug? I'd be afraid of using a ceramic mug in the garage in case I break it.
“Like a Honda Civic”…*flapflapflapflapflap* 🤣
Turbo civic owners…
👁👄👁
No such thing as "hard" and "easy" only a matter of time. If you normally think something is hard, just change your mindset and say it takes a lot of time. You get rid of the "hard" aspect and mentally it makes the job easier. Before my injury when I was a mechanic, I wouldn't look at a job based on how hard it was, only the time it took. And usually I would end up completing the job way before the paid time. So if a job paid 6 hours I would get it done in 4 hours, but still get paid 6. All because I kept my mind on the idea that it would take time instead of how hard it was. Some people don't get it, think im crazy, but once you start doing it, things move forward pretty well.
Also, you keep saying your skill level. like you want to apologize. don't. do what you love, do what you want, and enjoy the shit out of it! love the build.
I'm attempting to turbo my AE95 corolla 4x4 wagon , so seeing the process on the kei truck is really interesting! Cheers
@@FixingWithFriends haha thanks for the heads up. Not yet, once I source all parts , I'll be documenting my journey
54:24 human VTEC kicked in
54:24 love the random fart after saying "subaru nerds" hahaha
Yoda is a legend. He's so flippin smart
Love TimTams!
A Friend named David from Adelaide comes to the states on business every once in a while. He introduced me to TimTam's and the TimTam slam with coffee, several years ago. Actually a really good snack. A few years later they started showing up on our grocery store shelf here in Ohio.
Love the truck too btw.
Please do a travel coffee mug for the car, thanks in advance
They do appear to sell one! mightycarmods.com/collections/accessories/products/travel-mug
Awesome, I didnt know there was one, Ill have to get one , plus the new one for home :)
"May the forced induction be with you" Turbo Yoda
Is a visit to barrel bros in order or are the steelies here to stay?
Ok which one of you guys dropped their guts at 54:22? Lol
There was one earlier in the video too
I thought 💭 I herd something
@@M3PH11 oh really bahaha must be all the tofu they be eatin lol
Human blow off valve? Or was that venting the organic waste gate?
BOM is happy about the bracketry
"Quiet and clean chopping". Sounds like a really fast EV.
EVs can go to hell
Nerdy and exciting stuff you mean Martin ✌😁 this makes me want to turbo my 1 litre K11
do it!
Martin, you talk about the RHB31 and the RHF3 being the "Upgrade" for Daihatsu Land but you forgot about the RHB32 that came out on Charade Turbos from factory.
Using the factory parts off a original G11 Turbo i ended up turboing my G200 Charade, the only let down was the mechanical fuel pump couldnt keep up and the carby would begin surging
@@FixingWithFriends i was running the factory G11 Turbo carb instead of the G200 NA carb. Problem was G11 Turbos have an electric fuel pump where as the NA engines use mechanical fuel pumps, the mechanical pump cant keep up with the fuel requirements needed to run the engine properly, sure it would idle and i could slowly accelerate along but if i miss judged how hard i accelerated tbe car would start hunting along and starve for fuel
First 100 comments!!!
Was waiting for this! Missing the bucket on the intake!
The planning and skill to make two videos, and then plan and build a turbo system on top of that. 👍
The hard line from power steering pumps makes great return flanges!!
Good tip, thanks!
You might do engine work from under the seat in a Cab Over truck, if you cut a hole through the floor!
I'm surprised Turbo Yoda didn't laugh at the engine size. He really has seen and heard it all.
As an mechanical engineering major, I am here for the nerdy-ness!
Cant wait till ya make a custom snorkel for more 4wd adventures!
was soooo looking forward to this!!!!!
5:45 Is that the General Lee????
Ive never been to an MCM vid within 15 mins of upload... you usually upload at like 4 am for me haha
That turbo is a knockoff John Deere
New t-shirt from Marty’s commentary ‘for quiet and clean chopping’ and a picture of a bandsaw
Is nobody going to mention the General Lee?
nope no need
I did a turbo conversion on a Ford Spectron. Swapped the F8 engine with an F2T. Write up is on your forums forums.mightycarmods.com/forum/members-section/members-rides/797629-ford-spectron-f2t-turbo-conversion
Daaam Moog flexin L lenses.
I have a seemingly dumb question, I have a 2013 opel astra j 1.4t pushing 158 wheel kw. How do I get my turbo to make those sweet sounds? Love this channel, have been a fan since the Subarute build.
It would be hilarious if they were to get another kei truck and STI swap it, it might just fit in there
I've been looking at my spare VW Type 3 engine and transaxle, then at my Hijet! Hmm!
@@terryjackson4538 There is always BMW's "Flying Brick" 4 cylinder
@@zigenstern thinking the flat air-cooled set so the carbs and dizzy etc are set under the hatch in the tray. Puts the diff at the axle point with a normal vw style IRS and CVs. The diff would need to be flipped to run the right way. Gearbox would then hang out the back. All a bit backward but a dak dak sounding kei truck would be cool.
TimTam's are hands down my favorite cookie and you guys introduced me to them on the Unicorn Circuit. When I can find them here (Oregon, US) I keep a pack in the tool box incase someone needs a morale boost in the shop. Broken new parts or tools, TimTam. Bike or car needs more parts overnight from Japan, TimTam. Job well done, you better believe we celebrate with a TimTam.
"A video Moog did"
Ladies and gentlemen, I think for the first time ever, Martin addressed Moog's nickname
What? That's not the first time mate.
would be more funny, if he would call him blake
hahaha i had one of those moments today Marty! I dropped a nut and found it 3m away how the heck does that happen .Enjoyable video to watch 👍
"I don't think anyone out there can guess what's in my pants" *cuts camera*
A Kookaburra? (What's in Moog's pants) Cause, you know, it sits in the old gum tree. Merry merry king of the bush is he.
57:27 Moogs blow off Impression and Marty's post turbo flutter evil laugh 58:52 haha, Great episode guys and well done!
build an old datsun like a 620!! ill even give you my datsun 210 sunny california wagon
"This is a bung", "that is a hole", "which means that is a bunghole" .......... Heh ... Heh .. hehehe . Hehehehehe!!!
Ow man, where is my tp at?!
Marry likes Timtams. So can we call the K Truck the Tippertam??
When placing things always look at what it takes to repair or remove the thing in 2 years. A good fabrication rule. That battery placement you will need to remove that crossmember to change the battery. There must be a better spot.
Oh that turbo flutter.... I can hear the turbo fins shaking and disbalancing itself.
Pressure relief valve! or blow-off or whatever. It's meant to be used!
I watch a many of RUclips videos from basically all the automotive content creators. But no one does it like MCM. Don’t know what it is. But everything they do is relatable. I have never met these guys. But I almost seems like I work with the guys everyday when they make one of these videos. Freaking awesome love when a new one drops no matter the material, because at the end of the day they have killed it. That being said. I think the guys should do another engine swap. One in a sexy kinda modern Jdm legend. With one of the worlds best engines. Mk4 Supra with a n/a coyote. It would tick off the entire world and I think the guys would be down for it. Plus I don’t think it’s ever been done. Sure it’s difficult and expensive but just imagine it being delivered in this same format. Complete short video at first with the detailed one to follow. I would watch it 10 times. Cheers fellas
Everything's great as of late. But wtf about Marty's gemini???
I might never meet you guys in real life but just so you know , i love guys!
Thanks for the great videos!!!
Been waiting yrs for a good hour odd vid of Moog tracks and driving. Give it a go match up to the songs like drive red lights etc. Something to smoke and chill to. The other kei truck vid was a good start
Very cool that you two get along so well after all these years.
Just friends working on cars.
With the new position of the battery will you be able to lift the tray to get a jump pack on it in the event of a flat battery?
"Like a Honda civic" (repeatedly taps bin with in the bin sticker) 😂
does anybody know what the dimensions of their garage is? it seems perfect for what i want to do.
MCM Law; Given enough time, every car in MCM garage will end up with a Subaru part
54:22 own up, who farted.
Love how Marty get so much pleasure from his JDM projects and I must admit outside of japan not many really nice K trucks like the one Marty has. Love the behind the Scenes extra content it's Just SO GOOD. Thanks Moog for the support to Marty on this. Have another Timtam.
If my suspicions are correct, Marty smokes weed and I swear I can tell the exact point in the video where he comes back on screen after a session lol
And so what? It's legal where I live. Only difference is nobody sells it privately anymore.
Love the content guys! I have literally watched every episode since you started your channel. Just want to add some comedy here: 54:24 Someone thought the mic won't pickup that fart hey HAHAHAHAHA
I laughed so much at the 18:54 bit HAHAHAHAHA
I'm so happy you made a longer video on it too. I was so curious! MAAAAAAAD
Love the fact that flange, in my country at least, is another word for a lady's spam folder 🤣
TIL about a “ladies spam folder” thanks boss
"What would you do without an Al and a Benny? You'd be driving some naturally aspirated rubbish, like a Honda Civic"
Daaaamn shots fired yo!
At me 😭
Compressor surge sounds cool but no plans for a BPV or BOV?
I'm really proud of you guys for tackling this by yourselves, I was a little dissapointed last week that we only got the edited video, now I'm so excited we get the disrepected version now!
Marty's laughs and huge smile on his face is totally worth every hour spent on this Kei truck. It's just so contagious!
you had me at BUNGHOLE!
Zen and the art of turbocharging a Kai truck!
Great for people to see how much time it takes for the different shots for a video. Redoing stuff, setup, lens changes etc rather than just getting on with it. Appreciate all the effort as always.
Nice job guys. Always a pleasure.
is it bad that my eyes lit up and a smile crossed my face when i saw a time mark of 58:55?
Suzuki carry has a lift seat turbo conversion
I'll admit, in the first vid I was wondering why you went with a primary, so much more common for failing on the Legacy's (since it's on boost so much of the time), here in NZ the wrecker prices are over $600 for any, just because supply and demand figures are so skewed. BG's and BH's aren't worth wreckers time anymore, but there's still so so many old ones on the road blowing primary turbo's all the time that the demand outstrips supply quite redily here. The secondary's though, comparitively speaking never fail, and so are a dime a dozzen. I was surprisde to hear how cheap and easy it was for you to track down primary turbo's! That said market place here you can still pick em up for cheap, but they get gobbled up pretty quick at those prices.
Marty, you really shoult fit a small flex pipe on that exhaust... the vibrating forces from the exhaust and the engine movement will be sent to your welds and break them somewhere.
And you didn't fit any BOV, did you? It's not that good for that compressor wheel, releasing the overpressure over it... altough it makes funny noises because of that...
#HeartTheFart @ 54:24 i believe marty makes a little blow off sound of his own. may i have permission to use the fart clip? thank you :D hugs love and bee safe :D keep up the awesome vids :D
Thats some nice over night parts from japan 🇯🇵👌
Fell asleep to the other video, loved the nerd version 🤓
I realize that this video is almost a year old, but I love these older turbo conversion videos. My favorite was the first MX5 turbo conversion video with TurboYoda. What ever happened to that car Mah-tin?
Massive thanks for using a camera gimbal mate !!
Lovely & smooth !
You're not a Bower bird, you're a Maggie !
A Toyota Tarago (Previa/Estima) would be a Turbo conversion under the seat...
Kinda smooth. The 25fps upload is causing judder on my 60fps tablet. Most phones and computer monitors are also 60fps. RUclipsrs should film and upload in 30 or 60fps for to avoid conversion judder on movement.
Marty: This is about the top of my skill
Me: CALL TURBO YODA!
Marty:This is a bit out of my realm of knowledge
Me: CALL TURBO YODA!
13:30 Me into the video: FINALLY!!!