Products that we use and recommend: ► Panel Removal Set: amzn.to/3YiMADu ► Tool Set: amzn.to/3p5MM6t ► Screwdriver Set: amzn.to/3XRB28Q ► Castrol Oil: amzn.to/3xBc8B9 ► Oil Filter: amzn.to/3w0Ulme ► Torque Wrench: amzn.to/32qyRwg ► Liqui Moly Engine Flush: amzn.to/3IiDBID ► OBD Scanner that we use most often: amzn.to/3I4MQfe ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
Thank you. Was able to figure out problem after watching this. I had moved the seat upwards toward the roof and all the way back so that my daughter could see on our ride. This must have moved wire enough to loosen connection. Returned seat to normal position and light turned off.
Also on Ford, check if your dashboard warning light for 'PASSENGER AIRBAG OFF" has been Disconnected or bulb burned out. If not connected, it will trigger 1-8 yellow flashing airbag lights. ( One - pause - Eight flashes, then 1-8 again).
I test drove a 2016 Explorer XLT a few days ago. It drove and handled great. But, the airbag light was on during the entire test drive. Thanks for the info. I'm going to go ahead and buy it, and then change the fuse as you recommended. Thanks again.
@@jesustm6 Just a follow-up to the Explorer. I actually did not buy the 2016. I went ahead and bought a new 2023. I figured why buy some else😃 headache. This way, I can start new with my own.
Thank you for your video. Isn't it ironic that you're name is the "Auto Repair Guys?...as you used the word "guys" 57 times during your video. Thanks guys!
Ford has an ongoing recall for 2014 escape Restraints Control Module. apparently a short may happen with in the module the Airbag light comes on and well the problems start. If your truck's Airbag light has never come on is still out would replacing the module under recall be worth the chance the idiots that work there may screw something else up while replacing this unit. No Light No worries after 9 years seem right?
I have 2013 ford Fusion SE 2.5L. I have airbag light on. Scanner detected code B0050 Driver side seat belt sensor. Could you please give me indication where is located this sensor? Do I need to replaced entire seat belt retractor assembly?
I have 2013 ford focus hatch, i managed to spill an entire gallon of water on the passenger seat, could water have damaged the sensor? My airbag light is on
So cool and fun idea to help during oBidenBama 2.0 depression: Please offer free scanner to whomever can guess the number of times "GUYS" is said on video!
Products that we use and recommend:
► Panel Removal Set: amzn.to/3YiMADu
► Tool Set: amzn.to/3p5MM6t
► Screwdriver Set: amzn.to/3XRB28Q
► Castrol Oil: amzn.to/3xBc8B9
► Oil Filter: amzn.to/3w0Ulme
► Torque Wrench: amzn.to/32qyRwg
► Liqui Moly Engine Flush: amzn.to/3IiDBID
► OBD Scanner that we use most often: amzn.to/3I4MQfe
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
You have explained very well but you didn't show which wire have you reconnected that might have cause the airbag warning light.
I take a shot of Jack Daniels every time he says guys
@1:05, I’m drunk already
My liver hates you.
*Lahey falling down staircase meme*
I’m inebriated….guys 🤣 your jolly good health ….🍻guys
You trying to kill me? 😂
Bro I love yu. Yu saved me from spending $250 tht the ford dealership. ❤ it was a plug 🔌 and I plugged it back in 🎉 yur the best
Thank you. Was able to figure out problem after watching this. I had moved the seat upwards toward the roof and all the way back so that my daughter could see on our ride. This must have moved wire enough to loosen connection. Returned seat to normal position and light turned off.
Omg ty so much I thought something was wrong you saved me a bundle
I love your videos; they are always clear and straight to the point. Please keep making videos. Thank you.
Fixed the problem !!!! Thanks a million
Great video. Everyone should take their automobile to you.
Nice looking test passenger 🤪
Us guys want to thank youse guys for making this video
Super helpful!
Don't put any thing under your seats guys 😉👍
Also on Ford, check if your dashboard warning light for 'PASSENGER AIRBAG OFF" has been Disconnected or bulb burned out. If not connected, it will trigger 1-8 yellow flashing airbag lights. ( One - pause - Eight flashes, then 1-8 again).
I test drove a 2016 Explorer XLT a few days ago. It drove and handled great. But, the airbag light was on during the entire test drive. Thanks for the info. I'm going to go ahead and buy it, and then change the fuse as you recommended. Thanks again.
he didn't recommend to change the fuse
@@jesustm6 Just a follow-up to the Explorer. I actually did not buy the 2016. I went ahead and bought a new 2023. I figured why buy some else😃 headache. This way, I can start new with my own.
Hi, I have code b0091 left side restraints sensor 1. where is this one located?
Nice one.
Thank you, guys
Thank you for your video. Isn't it ironic that you're name is the "Auto Repair Guys?...as you used the word "guys" 57 times during your video. Thanks guys!
Does it apply for the Ford Ranger 2019?
You just saved me $900. Took 10 seconds and boom fixed.
real easy if you have the 2400$ for the code reader.
Or you can download forscan for free
@@chip1472 forcan? Wym it’s an app ?
What crash status in BCM
Take a shot every time he says ‘guys’....
Did it guys, now I need a liver transplant guys
Broooooo. Fuckin fixed it. Thanks a bunch man . Can't believe it . It just fell off the freaking seat
What fell off the seat?
On a 2011 fusion can I change airbag module with one out of a junk car
My 2001 Ford KA doesn’t have connectors under any of the seats so where would it be on my car???
Is that a mk808 scanner
Guys I guys can't guys believe guys how guys he guys many guys times guys said guys in guys the guys video guys.
He said “guys” 57 times in this video.
Come on you guys 😆
😂
Very very funny
wise guys
Ford has an ongoing recall for 2014 escape Restraints Control Module. apparently a short may happen with in the module the Airbag light comes on and well the problems start. If your truck's Airbag light has never come on is still out would replacing the module under recall be worth the chance the idiots that work there may screw something else up while replacing this unit. No Light No worries after 9 years seem right?
I have 2013 ford Fusion SE 2.5L. I have airbag light on. Scanner detected code B0050 Driver side seat belt sensor. Could you please give me indication where is located this sensor? Do I need to replaced entire seat belt retractor assembly?
how many times can you say "guys" in 8:30 LMAO
I have 2013 ford focus hatch, i managed to spill an entire gallon of water on the passenger seat, could water have damaged the sensor? My airbag light is on
How do you get off the light in a 2006 merc 4x4
You gents are beautiful 👑🫶🏽
Didn't work for me 😞
What ended up happening?
@@MoneyOverFame Nothing, light came right back on.
the machine that reads code is way too slow
Gotta love government warning lights. Airbags, emissions...
That was a boy that got into the passenger seat
4:30
I like jewelry guys
Sounds like he's drowning in Drakkar.
Guys,Guys,Guys,Guys 😀😀😀😀and mor Guys 😂😂😂😂
If Meatwad from ATHF was from Russia
Jar Jar Binks when his tongue gets electrocuted
I just busted out laughing sooooo hard!
thanks guys(56)
I don't understand a word you said.
Exactly
is there anyway possiible for you to speak any faster
I only understand... guyss.. guyss.. guys...
I think you're great with your extensive knowledge. But please please PLEASE stop saying "Guys!" 🤯
Guys. Guys. Guys. You can use other words in the English language. K guys
I wish this video had subtitles it's very difficult to understand what he's saying. 🤬 FK
You need to watch more movies with Russians speaking English.
Can’t understand a word you are saying
What language are you speaking?
English, the same language you’re writing in. Did you mean to ask where his accent is from?
Stop saying guys. WTF?
he speak to fast relax and speak slow
Please Stop saying "guys" every other word!!!!
Look like you are lost, AirBag Diagnostic is not for Every body.
Guys guys guys ,please NO MORE GUYS
what has been done? waste of time.
Nonsence
You talk too fast and don’t enunciate your words clear😩
U1604-81 how to solve this code plz help me
So cool and fun idea to help during oBidenBama 2.0 depression:
Please offer free scanner to whomever can guess the number of times "GUYS" is said on video!