Hi i came across your video, my daughter's remote is missing the top. She needs new remotes. There's no alarm , just starts 2017 Hyundai Elantra and opens and locks doors. How would i go about getting the right remotes. I see old remote says prestige on it. And do you know of a good sight to order them from, and oncce in hand i would follow what you said in this video to program new remotes. Thanks if you could help me out, so i dont by the wrong remotes. Not sure where else to look for any type of model number. Thank you
Hi Lessco, I have a 1986 T/A Car with power door locks and Power trunk release button in the cabin they all work. I want to buy the APS25Z ,but my car didn't previously have keyless entry just power lock and trunk option so does this alarm system have all the parts to give my firebird Keyless door locks and keyless Trunk Pop or do I have to buy more parts? I don't want anything else just the basics * ( maybe gps is that an add on to this alarm? ) I guess it don't matter gps can be 3rd party anyway. Sorry haven't had a third-party system since very late 198o's
Good day, great video. I have a prestige car alarm and it does not make a sound when I arm or disarm it. For example, when I unlock and lock the door there is absolutely no alarm sound. However, the alarm still sounds if someone tries to open the door without disarming it. Can you please help? 👍🏿. Thanks
I have a Audiovox Prestige ELVATOD APS2K4 in my 85 Mont Carlo SS. It has went bad and has taken out two batteries and a alternator. I just want to remove it properly. Do you have a link to a video that shows how to remove it?
How so you program the timer. They made to where it only last 45 seconds? I'm the winter time that's not even enough to defrost the windows. I want or to where I can use the remote start and let my car warm up at least
After doing this, I can get the remote to lock both doors when I hit the lock button. But when I hit the unlock button, it only unlocks the driver side door and not the passenger side. Any ideas?
I have a aps25z in my car installed it awhile ago by shop it was working good until one day it stopped alerting me if it was impacted or alarm doesn't Go off anymore unless the door opens can I have. A bad shock sensor ? I have a a really loud sound system In my car reaches to a 158+ dbs daily
I have the basic unit on the right. I just i stalled it in my 1993 Jeep Grand Cherokee. When I hook the car battery back up, the led on the valet thing blinks 1 long blink then a short pause the 2 blinks then a pause, then repeats. I can not find anything online about this or how to "factory reset" it. Im hoping you can help. Happy Holidays to you and thank you for sharing your knowledge!!
Hello thanks for this video I have two questions , I currently have a 1 way remote starter using a single button 151sp remote and I was wondering is I could use 155sp remote that has the lock cl and unlock buttons , and also my kid has and is250 Lexus 2006 and two shops have had trouble adding a remote starter but the last guy said if I get a factory fob to leave in the car it would work because he says that is some type of push button delay ..those that make sense? .. Thanks for your help
What exactly is the Valet button for ? I know programming keys and buttons but if I press the button once what will it do ? How does that valet button work.. why it's called valet ???
If I'm replacing my prestige part 183bp remote because of wear and tear (not the entire alarm system), do I just press the lock button until it starts flashing while the ignition is on? I'm only trying to get a replacement alarm remote and program it to my vehicle without touching any of the wiring underneath the hood. I know if I take back to the shop that originally did it, they're gonna charge me an arm and a leg.
Hi .. I had just installed a Prestige APS 977 Z but doesn’t open the ignitions.. does just for a few seconds.. can do you give me some help with the problem..? Thank you
I would NEVER purchase this system because of the lack of information available as to how you can program the fob. I just purchased a 1994 Suburban with this system already installed and the first day I pushed the button to start the vehicle remotely and it fired right up. Since then I have tried perhaps 15 times and only succeeded twice more by holding it close to the receiver (?) that is suction cupped to the windshield. Does the receiver need a battery or does it run off the vehicle battery? I can't find this out. I have tried for two days to get answers and there isn't anyone providing information. Very frustrating.
Man I'm really confused. I'm installing the prestige aps596z on my 2007 Dodge ram. Theres an orange wire on the supplied harness that goes to the "starter kill/ anti grind relay". Now does that go to the factory harness, or the "starter kill" relay they also provided in the kit. On the diagram the orange wire has output on it, and on the supplied relay they sent, it says starter kill input. But also on my trucks factory harness, it has a yellow/gray wire that says it's the starter kill wire, which I followed and it's the one that goes to my starter. If you could help me out, I'd appreciate it
I have a car amplifier question for you I figured I'd try to ask you through one of your most recent uploaded videos I know this doesn't pertain to this video I have a 4-channel car amplifier channels 1 2 and 4 work great channel 3 is scratchy I'm swamped RCA's and speakers to make sure it wasn't one of them for the head unit it is narrow down to channel 3 only playing with the gain or the crossover switches or anything like that does not make any difference is there any way to test the positive and negative on just that channel to narrow it down some more or does it need to be opened up from here
Bought a used car with the APS-57C. No remotes so I bought one on ebay. I programmed it and Now instead of two remotes programmed its shows it has 3 programmed. How can I erase all remotes to just save 1. This way i dont have to see the led flash a total of 9 times every time i start the car.
Hello . Do I need to press each button on each remote to program its function individually or just doing the lock button is enough and the other functions are automatically learned like unlock, trunk, remote starter , etc ?
Hello, I have lost the lock/unlock feature of my alarm. It will still arm/disarm, but will no longer lock/unlock both my doors. How do I get this feature to work again?
Hello, with the Aps 25z, my car used to make a 3 beep sound when I locked up the car and it doesn't make it any more, how do I get it back? Thank you in advance. Nice videos.
How do i set the sensitivity? mine only goes off if i try to open the driver side door only. If i bump the car or try to open the back doors it dont go off.thank u
Thank you man I was tired of paying to have it reset
This is 100% accurate it actually works the first time I tried it, thanks alot
No problem 👍
Hi i came across your video, my daughter's remote is missing the top. She needs new remotes. There's no alarm , just starts 2017 Hyundai Elantra and opens and locks doors. How would i go about getting the right remotes. I see old remote says prestige on it. And do you know of a good sight to order them from, and oncce in hand i would follow what you said in this video to program new remotes. Thanks if you could help me out, so i dont by the wrong remotes. Not sure where else to look for any type of model number. Thank you
Hi Lessco,
I have a 1986 T/A Car with power door locks and Power trunk release button in the cabin they all work. I want to buy the APS25Z ,but my car didn't previously have keyless entry just power lock and trunk option so does this alarm system have all the parts to give my firebird Keyless door locks and keyless Trunk Pop or do I have to buy more parts? I don't want anything else just the basics
* ( maybe gps is that an add on to this alarm? ) I guess it don't matter gps can be 3rd party anyway. Sorry haven't had a third-party system since very late 198o's
Good day, great video. I have a prestige car alarm and it does not make a sound when I arm or disarm it. For example, when I unlock and lock the door there is absolutely no alarm sound. However, the alarm still sounds if someone tries to open the door without disarming it. Can you please help? 👍🏿. Thanks
call audiovox tech at 631 231 7750
Turn key on then off then press valet 3 times I think. Might be 2 but there's a video on my channel on how to do it
Thanks for the info. Help me a lot. Thanks again.
I have a Audiovox Prestige ELVATOD APS2K4 in my 85 Mont Carlo SS. It has went bad and has taken out two batteries and a alternator. I just want to remove it properly. Do you have a link to a video that shows how to remove it?
It worked but now only the lock pad is functioning as both open and lock ….any suggestions??
I have a prestige alarm from around 2009. Is it possible to just swap out the brain with a newer module?
Same question. Did you ever get an answer
I have a push start ignition... any tips? I don't seem to be able to get it into acc mode
How so you program the timer. They made to where it only last 45 seconds? I'm the winter time that's not even enough to defrost the windows.
I want or to where I can use the remote start and let my car warm up at least
After doing this, I can get the remote to lock both doors when I hit the lock button. But when I hit the unlock button, it only unlocks the driver side door and not the passenger side. Any ideas?
I have a aps25z in my car installed it awhile ago by shop it was working good until one day it stopped alerting me if it was impacted or alarm doesn't Go off anymore unless the door opens can I have. A bad shock sensor ? I have a a really loud sound system In my car reaches to a 158+ dbs daily
I have the basic unit on the right. I just i stalled it in my 1993 Jeep Grand Cherokee. When I hook the car battery back up, the led on the valet thing blinks 1 long blink then a short pause the 2 blinks then a pause, then repeats. I can not find anything online about this or how to "factory reset" it. Im hoping you can help. Happy Holidays to you and thank you for sharing your knowledge!!
Great! We were able to reprogram the remote!
Hello thanks for this video I have two questions , I currently have a 1 way remote starter using a single button 151sp remote and I was wondering is I could use 155sp remote that has the lock cl and unlock buttons , and also my kid has and is250 Lexus 2006 and two shops have had trouble adding a remote starter but the last guy said if I get a factory fob to leave in the car it would work because he says that is some type of push button delay ..those that make sense? ..
Thanks for your help
What exactly is the Valet button for ? I know programming keys and buttons but if I press the button once what will it do ? How does that valet button work.. why it's called valet ???
Do you know if older Code Alarm units (CA6554) can use newer transmitters from Compustar (RF2WT9FM) or Prestige (18LCDSP)?
Does this start the engine also?
If I'm replacing my prestige part 183bp remote because of wear and tear (not the entire alarm system), do I just press the lock button until it starts flashing while the ignition is on? I'm only trying to get a replacement alarm remote and program it to my vehicle without touching any of the wiring underneath the hood. I know if I take back to the shop that originally did it, they're gonna charge me an arm and a leg.
is the aps57z remote work for a 143bp i need new remotes hard to find the 143bp
If this doesn't work, what then?
Excellent worked on the first try
Hi .. I had just installed a Prestige APS 977 Z but doesn’t open the ignitions.. does just for a few seconds.. can do you give me some help with the problem..?
Thank you
call audiovox tech at 631 231 7750
I order a new control since i lost mine, so how can i pair it to my alarm its the 145sp
I would NEVER purchase this system because of the lack of information available as to how you can program the fob. I just purchased a 1994 Suburban with this system already installed and the first day I pushed the button to start the vehicle remotely and it fired right up. Since then I have tried perhaps 15 times and only succeeded twice more by holding it close to the receiver (?) that is suction cupped to the windshield. Does the receiver need a battery or does it run off the vehicle battery? I can't find this out. I have tried for two days to get answers and there isn't anyone providing information. Very frustrating.
Man I'm really confused. I'm installing the prestige aps596z on my 2007 Dodge ram. Theres an orange wire on the supplied harness that goes to the "starter kill/ anti grind relay". Now does that go to the factory harness, or the "starter kill" relay they also provided in the kit. On the diagram the orange wire has output on it, and on the supplied relay they sent, it says starter kill input. But also on my trucks factory harness, it has a yellow/gray wire that says it's the starter kill wire, which I followed and it's the one that goes to my starter. If you could help me out, I'd appreciate it
Thank you it help very with your video..
How do you remove a remote if you lost it?
How do you program the options?
I have a car amplifier question for you I figured I'd try to ask you through one of your most recent uploaded videos I know this doesn't pertain to this video I have a 4-channel car amplifier channels 1 2 and 4 work great channel 3 is scratchy I'm swamped RCA's and speakers to make sure it wasn't one of them for the head unit it is narrow down to channel 3 only playing with the gain or the crossover switches or anything like that does not make any difference is there any way to test the positive and negative on just that channel to narrow it down some more or does it need to be opened up from here
I think it should be bench tested to do it right.
Bought a used car with the APS-57C. No remotes so I bought one on ebay. I programmed it and Now instead of two remotes programmed its shows it has 3 programmed. How can I erase all remotes to just save 1. This way i dont have to see the led flash a total of 9 times every time i start the car.
Hello . Do I need to press each button on each remote to program its function individually or just doing the lock button is enough and the other functions are automatically learned like unlock, trunk, remote starter , etc ?
just the lock should do it
When I press the lock button nothing happens. how long should I hold it
Can you tell me how to reduce the Sensibility on my car alarm , ? please
Hello, I have lost the lock/unlock feature of my alarm. It will still arm/disarm, but will no longer lock/unlock both my doors. How do I get this feature to work again?
Did you figure it out?
@@dann12343 Nope, the alarm works, but not like it’s supposed to.
I have the basic and it was working fine till yesterday. My remote only works when I'm close to my vehicle
You need to change the battery.
How to program the remote to start the car
ruclips.net/video/gCkj_isloBc/видео.html
What to do if my alarm goes off each time a car with loud music / engine loud or airplanes ✈️ pass by 🤦🏻♀️🤦🏻♀️🤦🏻♀️Such of head ache 🤕 with that
turn down the shock sensor with the provided screw on it. easy fix
How do you start if your car uses a START button, no key?
Ew
How to adjust sensibility please ????
To add a replacement transmitter, do I have to follow steps for both the new one and old one?
I always do them all together.
Thanks simple
Hi, this method work with prestige aps-25ch? thanks
Hello, with the Aps 25z, my car used to make a 3 beep sound when I locked up the car and it doesn't make it any more, how do I get it back? Thank you in advance. Nice videos.
turn the key on and flip the valet swich on/off/on/off/on and itll come back
@@Lesscoelectronics thank you so much for your help! I'll try it once I get out of work.
It programmed. But still won’t unlock or lock my doors. Or start my car
Same here mine wont unlock
@@BenKochendorfer mine won’t lock or unlock or start. But the light is lighting up
Can work that with Audi A7
2012
This is a remote start yes?
Yo tried to comment on another video of your but comments are disabled. Its about stero noise. Please get back to me asap thanks
Necesito tu ayuda
How do i set the sensitivity? mine only goes off if i try to open the driver side door only. If i bump the car or try to open the back doors it dont go off.thank u