Another very informative video guys. One thing I think you should try is drawing a cross one inch or 2 cm vertically and horizontally on centre of your target with normal pen,this will really help with accuracy as you can line up your crosshairs and even if you shootout the middle you can still aim by having the four points of crosshair over four points of cross.
Just a small point, I have a 2013 version of this gun, which has been a good reliable back garden plinker and target plaything, a thing to watch out for on the safety... if you forget the safety and start to apply the trigger, beware, if you then push the safety home it will fire the gun!, you need to recock the rifle and reset the Safety to the be able to disengage it and use the trigger! this may be due to my gun having the Welsh Willy Trigger two stage mod, but something to be aware of...
All your reviews are great l watch then all and your always impartial , It would be great if you could give the ft / pounds values in the videos Regards David
Thanks for your kind words. We always aim to be as honest as possible with our reviews.. That's a good suggestion and perhaps we will do this in the future. The reason we do not include it at this time is because there are many variables that impact a rifle's power and we do not want potential users to be disappointed if their rifle does not meet the same values.
What's the point in doing accuracy tests if you don't clean the barrel. The guns are made in China and shipped in containers with all the machining oil and other impurities in the barrel, which to some degree act as a protection against sea air corrosion. Cleaning only takes a couple of minutes and removing the stock gives you a chance to check if screws are tight, and look into the spring area for adequate grease. Greetings from Germany.
These rifles look lovely but I’ve heard that the triggers are awful. I can see by the way your trying to slowly and gradually pull the trigger that there’s acres of creep in it. Shame! I wonder if there’s a way to improve the trigger
Looks aweful to me, maybe test more pellets first to find if any suit and lead it in. Trigger looks terrible which is something budget guns rarely address. If you look at the Record trigger it doesn't look very expensive.
Another very informative video guys. One thing I think you should try is drawing a cross one inch or 2 cm vertically and horizontally on centre of your target with normal pen,this will really help with accuracy as you can line up your crosshairs and even if you shootout the middle you can still aim by having the four points of crosshair over four points of cross.
Just a small point, I have a 2013 version of this gun, which has been a good reliable back garden plinker and target plaything, a thing to watch out for on the safety... if you forget the safety and start to apply the trigger, beware, if you then push the safety home it will fire the gun!, you need to recock the rifle and reset the Safety to the be able to disengage it and use the trigger! this may be due to my gun having the Welsh Willy Trigger two stage mod, but something to be aware of...
All your reviews are great l watch then all and your always impartial , It would be great if you could give the ft / pounds values in the videos Regards David
Thanks for your kind words. We always aim to be as honest as possible with our reviews.. That's a good suggestion and perhaps we will do this in the future. The reason we do not include it at this time is because there are many variables that impact a rifle's power and we do not want potential users to be disappointed if their rifle does not meet the same values.
We also get Nx200 break barrel precihole&sport from india made😊.
Will that trigger take the RC bearing trick ?
Personally I’d be saving me pennies for a Weihrauch HW99.
Bag rested and 25 metres. . .that was pants!!
Excellent package for £200 good enough for vermin control
It definitely is a great little package. We are very impressed with the overall quality for this price point
The big question for me is how quiet it is.
Where is this air rifle made ?
“A big fingernail then” 🤣
What's the point in doing accuracy tests if you don't clean the barrel. The guns are made in China and shipped in containers with all the machining oil and other impurities in the barrel, which to some degree act as a protection against sea air corrosion.
Cleaning only takes a couple of minutes and removing the stock gives you a chance to check if screws are tight, and look into the spring area for adequate grease.
Greetings from Germany.
These rifles look lovely but I’ve heard that the triggers are awful. I can see by the way your trying to slowly and gradually pull the trigger that there’s acres of creep in it. Shame! I wonder if there’s a way to improve the trigger
Yes. There is a RC bearing . Modification. And replace adjustment screw. Look it up on utube . I now have a very nice trigger.
Looks aweful to me, maybe test more pellets first to find if any suit and lead it in. Trigger looks terrible which is something budget guns rarely address. If you look at the Record trigger it doesn't look very expensive.
horrible trigger !!!!! you do not know when its gona shoot
No recoil 😂
buy a wierauch