WORLD'S LARGEST Foam P-40 Warhawk 2000mm (Sky Flight Hobby) | MAIDEN | (English/Français) 4K 60fps
HTML-код
- Опубликовано: 9 июл 2024
- Hi folks 👋🏻🤠
- A huge thanks to you my friends for being subscribed 🙏🏻♥️ you’re now more than 1000 and that means a lot to me !
- Salut les gars 👋🏻🤠 un énorme merci à vous mes amis d'être abonnés 🙏🏻♥️ vous êtes maintenant plus de 1000 et ça me touche beaucoup, merci !
- Thanks a lot for watching this video, please subscribe to support the channel and never miss a new video 🙏🏻🥰
- Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour soutenir la chaîne et ne jamais rien manquer 🙏🏻🥰
Follow me on Instagram : / arthuraerorc
🎮 Jeti radio ➡️ www.opale-paramodels.com/fr/6...
- REX7 Assist ➡️ www.opale-paramodels.com/fr/r...
- Muli6S ➡️ www.opale-paramodels.com/fr/c...
🪖🦅 BUY your Sky Flight Hobby P-40E Warhawk 2000mm PNP (green) ➡️ www.turbines-rc.com/fr/warbir...
🪖🦅 Sky Flight Hobby P-40E Warhawk 2000mm PNP (green) the WORLD’S largest & most scale Foam P-40 😍
⚠️ Upgrades compared with Lanxiang’s 10 years old P-40:
- ESC, motor and servos are upgraded.
- Metal landing gear, changed the materials of the landing gear, to make it more tough!
Wingspan 2000mm, Length 1711mm, weight without LiPo 4000gr (with Admiral 5000 50C : 4700gr )
Wing area : 67.25 d㎡
Wing load : 59.47 g/d㎡
Propeller diameter : 18×8in
Thrust : ≥5600g
ESC : Hobbywing 60A
7×Digital metal 17g servo
Brushless motor : 5060 290KV
- CG 36mm in front of the trailing edge of « gear’s cover » plane upside down gear up ! BUT it’s easier to measure 115mm from leading edge of the wing just next to the gear : Admiral 5000mAh 50C (705gr) or CNHL 4000mAh 70C (690gr) all the way forward (we don’t have the choice for the LiPo placement…)
My rates Low/Mid/High AFTER MAIDEN:
- Ailerons : 80% (25mm) / 90% (28mm) / 100% (31mm)
- Elevator : 50% (20mm) / 60% (25mm) / 80% (32mm)
- Rudder : 30% (21mm) / 70% (45mm) / 100% (60mm)
- Flaps : No flaps for takeoff but 20 degrees (30mm) for windy landing flaps and 45 degrees (65mm) for no wind landing flaps, with 5mm down elevator compensation (10%)
- Throttle to right 10mm rudder mix (20%)
⚠️ Add a few clicks of throttle trim before the take-off to keep the plane straight on the runway axis after touchdown !
🚨🛠 Build tips:
- Reinforce fuselage junction with carbon rods 4mm diameter because glue isn’t enough (renfort avec 2 joncs carbone 4mm entre les deux parties du fuselage)
- I added 4 magnets to be sure the huge cockpit won’t fly away (j’ai ajouté 4 aimants pour sécurisé le cockpit)
Flights with LiPo & timings :
-1st CG 115mm from leading edge, gear up, upside down // Admiral 5000 : 4m38 (4m29 motor) 3.85v
-2nd : CNHL 4000 70C : 4m40 (4m21 motor) : 3.86v
-3rd (around 60-70% throttle) : Admiral 5000 : 5m05 (4m50 motor) : 3.86v
0:00 Intro
0:20 Presentation (CG, Rates which are too low!), upgrades, mixing...!
5:26 Takeoff
5:55 Trimming (almost nothing)
6:08 @PetrincicBrosRC "Gentle Giant at 60% throttle"
6:19 Full flaps test (5mm down elevator)
6:42 Full throttle (scale, not fast) Roll
7:00 Bomb dropping 💣
7:10 Cruising
7:32 CG Test inverted (slightly nose heavy)
7:46 RATES reminder!
8:13 Slow Low Flyby 1/2 throttle
9:10 Almost TOO LOW 😳🙈
9:24 Barrel Roll
9:33 LANDING (not bad for a maiden)
10:00 Taxiing (struts 😍)
10:22 Voltage check : 4m38 flight for 3,84v !
10:53 My final RATES ! Mes DEBATTEMENTS !
11:12 THANKS 🙏🏻🥰
11:37 Photos
11:56 Video : Reinforced fuselage (4mm carbon rods) MERCI YANN 🥰
12:58 Flat carbon parts 5x1mm
13:30 Pilot from Weymuller.fr
13:55 Cleaning all wires
14:38 Added 4 mMagnets to secure the Hatch!
15:36 60A ESC placement (velcro)
16:59 Flaps deflection (half 30mm, full 65mm)
#p40 #warbird #rcplane #lanxiang #avgeek #fighter #flightline #eflite #unboxing #warhawk #assembly #skyflight #ww2 #fms #radiocontrol #flight 
Спорт
très beau! That is a big foamy!!! 🇨🇦
Oh yeah big baby for sure !
Looks real 👌
Yes that’s awesome !!! So scale 🥰
The FMS P51 flys like that. Has nothing up at the top but the torque keeps it planted . If this bird is still available, id buy it
Yes it is 👌🏻The camo is available www.turbines-rc.com/fr/warbirds/2627-sky-flight-hobby-p-40e-warhawk-2000mm-pnp-camo.html?aff=4
The green needs to be ordered www.turbines-rc.com/fr/warbirds/2626-sky-flight-hobby-p-40e-warhawk-2000mm-pnp-vert.html?aff=4
I love how your runway looks line rangoon. Makes that plane look right at home.
Haha that’s right 😆👍🏻👍🏻
Yes it might be a gentle giant but it's still a warbird and will stall if flown too slow!
Well...the stall speed is very low though but yes of course...like all the planes : too slow = stall
Mine is Old School Balsa and Monocote.
That’s better than mine for sure 🥰🥰🥰
This is so much fun! Beautifull scaled airplanes.
Yes that’s a big bird for sure, very scale flyer !
Hi Arthur!
wow wow wow!! I really wanted to see the maiden flight of the P-40!!!
Absolutely spectacular!!! Authentic scale appearance!
A very satisfying video!
All the best!
Thanks my friend thanks 🙏🏻🙏🏻🙏🏻🤩 I love that giant 🥰
Wow! That's huge!
Oh yeaaaaah
I appreciate your intelligent videos- good info, no unnecessary filler nonsense. I had this plane years ago. Sold it due to disappointments with sluggish power and retracts. I had same issues others have reported; fragile mains and tail wheel jamming. Would like to order another but very hesitant due to issues. Can you offer any guidance/detailed solutions that you may offer? Best regards!
Thanks a lot Scott for your kind words but unfortunately I can’t help you more on this one because I crashed it…I wouldn’t recommend it now…😕
Superbe modèle, bravo à Robert pour les belles images 👏👏👏
Oui bravooooo à lui 🥰🥰🥰🙏🏻
For the price, there should be no room for improvement. Great video ! Thx
Yes I agree 😔😏
Thanks mate appreciate 🙏🏻
Je l'ai eu y a pas mal d'années via LANXIANG; Une grosse bouse... Train de mauvaise facture, se tord au moindre choc, ailes trop molles, se tordent à la moindre ressource... Donc uniquement pour des vols pépères.
Le train a été revu sur celui la il est bien mieux mais je l’ai crashé parce que les vis d’hélice ont cassées…du coup tout le moteur est parti en désintégrant tout l’avant donc forcément ça a fait des copeaux…donc ouais pas ouf ce gros pépère
Wow!!!
Haha that’s a beast !
Joli vol et superbe machine, congrats 👏🍾
Merci beaucoup 🙏🏻🙏🏻🙏🏻🙏🏻🥰
Yes! What a beautiful P40. I hadn't known about this one, thanks for the vid and tips! Like everyone, I like big planes. I have a P40 but I think I want this one as well!
Oh yeah you should get one 🥰🥰🤓
This is fabulous man!! Great job on the mods!! Love it ;)
Thanks a lot my friend 🙏🏻🙏🏻🙏🏻🥰
Hello, une fois réglé, le vol doit être magnifique !!!
4,7kg avec accu et train rentrant, c'est une plume vu la surface d'aile. 😊
Yes c’est dingue, charge alaire 59.47 g/d㎡
"not that fast but really really scale" screw scale! Put an E-flite Power 60 470kv in there and swing a 16x8 prop. You'll go faster than the full scale P-40 lol
Nice work buddy!
Hello Arthur .. Trop beau comme d'hab ....
Merci beaucoup Steph 🙏🏻🙏🏻🙏🏻🥰
Super nice I want one now, thanks.
So glad 🥰🥰🙏🏻🙏🏻 thanks a lot
Encore une mission réussie bravo Arthur
C'est vrai plus un modele est gros plus il vole realiste Intéressant les tips
Merci beaucoup Dom 🙏🏻🙏🏻🤩 oui et c’est un avion que tu voles tranquille avec de la voltige maquette souple c’est top
w00t
Have to give some advise though: Trimming takeoff torque makes little sense. The amount of rudder input required is totally different with tail wheel down vs up, and that transition has to be managed manually. It is simply a basic part of taildragger skill set, and exactly the same for full size too.
Second tip: Never skimp on rudder throws. Most warbirds require as much as physically possible - regardless of going low on ail/ele.
+1
Yeeeees but don’t worry master I have some rudder input for t/o it’s just a little help 🤓
Hi Arthur. How have you found the Jetti system… particularly signal reliability. I’m a lifelong Futaba guy, who most recently moved to Spektrum. I’ve lost a handful of planes due to signal loss. Would you recommend Jetti? My other consideration is Powerbox core. Cheers from Sydney. Rich
Great Review! Ive had my eye on this plane for some time now. The main problem with this model is the landing gear. Are you using the stock retracts?
It would be interesting to see what you did to beef up the retracts and struts.
Thanks a lot mate! I didn’t do anything to the retracts and they have been upgraded by Sky Flight Hobby, with Metal, changed the materials of the landing gear, to make it more tough!
What a beautiful beast... :D
Will you add some weathering?
Thanks bud and yes I have to weather it 🥰🥰🥰
@Arthur-RC 👍👍👍
It's light aircraft :D - fly with realistic speed :D. I'm waiting for 2.0 m Spitfire :D
Yes you’re right my friend ! Oh yeaaaah i really hope too for a 2m Spit
Great videos, Im awaiting delivery of my Green LX P40 monster. Great information. Is your right rudder progressive up to full throttle or just at full.
Progressive…according to the throttle…it’s a free mixing throttle to rudder
Hi, I read some further messages and replies and saw that your P40 had a mishap due to a prop failure. Was this the blade or the hub. I ask as I have just received the spare blades and hub I ordered with the model and discovered that one of the pegs in the hub has already broken off! Im thinking of just fitting a 4Max 5065 360kv motor and 16x10 MAS prop that I already have.
In a reply you also mentioned that you now wouldnt recommend the model..
Keep up the great reviews and tips.
@@bearsyandweeyes one blade just flew off….that’s not serious on a plane like that
I think the motor that's in the Carbon Z T-28 would fly this better. The kv on it now is too low for 6s. Might do better on 8s
I once lost my cockpit during a flight. Magnets are not reliable. Then I spent half an hour looking for a cabin in the field. (BF 109)
@@teamkaorin7355 ha yes….thats why I added magnets on mine 😇
@@ArthurRC 👍
@@teamkaorin7355 🥳
Bonsoir Arthur, je viens de commander le P40 sur turbines RC en précisant que tu m'avais conseiller ce site. Je suis toujours preneur pour le pilote. A plus et merci encore de ce que tu fais.👍
Oh merci beaucoup mais si tu veux que ça se voit il faut utiliser les liens affiliés que je met en description 😇🙏🏻 c’est ce lien www.turbines-rc.com/fr/?aff=4
Merci beaucoup ❤
Désolé, mais j'ai remise un petit message avec la commande. Tu as toujours le pilote ? Si oui je suis intéressé...@@ArthurRC
@@benoitpotrel1911 oui je l’ai encore…écris moi par e-mail arthuraerorc@gmail.com
Bonjour Arthur, pourrais tu me donner la référence du buste de pilote de chez Weymuller, car il y a plusieurs taille et je ne sais pas laquelle prendre...
Par avance Merci😜
Je peux te vendre le mien si tu veux, écris moi sur Instagram ou Facebook 🤓
Hi, You replied to me re throttle - rudder setting. I forgot to ask if this was just a take off mode/setting or also during flight.
At All time buddy
It arrived and as Arthur says its HUGE. Despite watching numerous videos it not until the parts are on the bench you realize.@@ArthurRC
@@bearsyandwee yeees that’s huge 🤣
Hello, tu nous referais pas un pti vol de plus avec ce gros pépère, maintenant qu'il est réglé ?
Un truc maquette tout en douceur😍😍😍
Il n’est malheureusement plus de ce monde…j’ai perdu une pâle en pleine remise de gaz…RIP le P-40 😔😭
@@ArthurRC c'est pas cool, désolé.....😔
@@patou3375 je suis tellement deg’ 😔
@@ArthurRC avec les vibrations que ca produit, il doit y avoir eu un max de dégâts immédiatement....
Les copains a qui c'est arrivé y ont laissé soit le moteur parti de suite, doit tout le devant.
Quelle galère....
@@patou3375 tout l’avant a explosé en vol oui…et du coup centré arrière et posé comme j’ai pu mais beaucoup trop de pièces éclatées pour revoler…y a zéro spare parts ! Donc je revendrai ce que j’ai pu sauver
I want to see it NOW 🙂
Unfortunately it’s in 13 hours 😇🥰🤓
Where can this be bought at in the US? I love it. This is my favorite old war plane.
At Banana hobby www.bananahobby.com/8-ch-blitzrcworks-green-super-p-40e-warhawk-rc-warbird-airplane-arf.html
Hi Wonderful video. Iam a new pilot and been waiting along time for what rates I should use on my P40 !I will be doing my maiden this weekThankyou
You’ll love it but don’t expect a racer plane 🤓 it’s a scale plane 🥰🥰
@@ArthurRC I used the two plastic T anchors that came with the plane to secure the canopy with two screws!I installed a spectrum 120 amp esc I was thinking of going 8 cells its the same motor thats in the FMS corsair uses RC informer said the factory told him it will handle the 8S.But I will try that later after a few flights.I sprayed mine with clear coat this foam is so delicate but its very light.Thankyou
Yeah well done that should be perfect with the T anchors! And yes clear coat is a nice improvement too! 🤙🏻🤙🏻🤙🏻🥰
@@ArthurRC Thankyou Authur. We flew ours today 7 times my ten year old son flew it also,your rates are perfect we stayed on high rates.We love it. I tipstall on last landing I was to slow I think was using flaps.Broke the prop,spinner & wing tube but we are already flying again, I always buy extra parts this plane is really tough.Iam worried about the motor not getting enough air flow to cool it when the spinner broke off I check it was really hot.I have a temperature sensor but I have no idea what desirable degrees would be?I really enjoy your channel very good information thanks again for all your details!! Its nice to be link with a great R/C pilot!!
@@edwinmclean2591 oh noooooo what a sad news…yes you always have to keep throttle until touch down🙏🏻
But that’s cool if it’s already repaired 👍🏻👍🏻
Thank you so much for your kind words mate 🥰🙏🏻
What pilot figure did you use?
It comes from Weymuller.fr and its « Buste de pilote WWII. Hauteur 101mm. Poids 65g » réf 0520425
You need to put a sound system in it!
Yes I agree but I don’t have it anymore 😔
@@ArthurRC oh no!!! Crash?
Yes sir! Lost one blade during a full throttle go around…motor and nose exploded….dive into the ground
@@ArthurRC oh man, that sucks.
@@lmramos44 totally…but I have many spare parts for sale
Ces sur, je regrette le miens 🔧😭
Aïe aïe aïe 😔
Banana Hobby sells it in the states too
Yes but I’m in france 🤓
@@ArthurRC I mentioned it for all of your fans in the states :)
Yeeaaaah 🇺🇸