simpleRTK2B Starter Kit LR from ArduSimple. Set of Base and Rover based on ZED-F9P + ANN-MB antenna
HTML-код
- Опубликовано: 28 сен 2024
- The simpleRTK2B - Starter Kit LR (Long Range, up to 10km) allows simple and fast evaluation of Dual Band GNSS (GPS/Galileo/Glonass/Beidou) RTK technology, based on u-blox ZED-F9P module.
www.ardusimple...
The kit includes all items necessary to setup a base and a rover and to experience centimeter-level precision GNSS. Just power it and use your preferred software to read the RTK positions. If you don't have any preferred software, you can use u-blox u-center, and see how the device is receiving satellite data and displays RTK FIXED.
Check the User Guide: www.ardusimple...
You might be interested in Medium Range (up to 1km) kit www.ardusimple... and Xtra Long Range (up to 50km) kit www.ardusimple...
Plastic Case for this kit: www.ardusimple...
Useful Tutorials: How to Determine Exact Position of your Base www.ardusimple... , how to connect ArduSimple RTK receiver to Arduino
www.ardusimple... , Raspberry Pi www.ardusimple... , NVIDIA Jetson www.ardusimple... , ROS www.ardusimple... and others www.ardusimple...
Are you new to RTK and don't know what products fit your needs? Find your product in a few steps www.ardusimple...
Visit our website www.ardusimple...
Is this still to complex? We are an unusual company, contact us ttps://www.ardusimple.com/contact/ and we clarify your doubts in 24h!
In the video, the base is connected via the POWER+GPS port, but in the User Guide, it says to connect to the POWER+XBEE port. Why is that?
Thank you for your question! You can actually use any of the 2 with a different purpose:
- POWER+GPS will give you access to the GPS data from a PC.
- POWER+XBEE is useful to power the board via wall adapter, and then have the POWER+GPS free, in case sometimes you want to connect with the PC to check or change parameters.
Both can be connected at the same time without problem.
Hi, do you have some documentation by to make the connection with Raspberry pi or Arduino?
yes, we have tutorials who to connect our board to Raspberry Pi www.ardusimple.com/connect-your-simplertk2b-to-a-raspberry-pi/ and Arduino www.ardusimple.com/how-to-connect-ardusimple-simplertk2b-3b-receivers-to-arduino/ If you have any issues or questions, just write to suport info@ardusimple.com
@@ardusimple thank you so much!!!
@@ardusimple thank you so much!!
Hi iam a small farmer looking for precision navigation along with the path recorder or path creator, what are the arudsimple items to buy and what other software to use for farming .... Thanks lot ....
Dear custopmer, we invite you to check our RTK assistant to find RTK products which the best fit for your needs. With a few simple questions we will recommend you a list of products and tutorials. www.ardusimple.com/product/completely-lost/
You want $700 for this?! you are crazy.
What is approximately cost of it?
Holy shit $700+? Hell no! That shit ain’t cost effective
Thank you for your feedback! 6 years ago such a kit was 15'000$... we believe we did an effort in reducing the market price for this technology... maybe in 5 more years it can be even more affordable!
Please demonstrate the rover and base kit afterwards using the new GNSS MASTER application. Thanks.
Thank you for your suggestions! We value your input and will keep it in mind for future youtube videos. Feel free to reach out if you have any more ideas or questions!
does it work with emlid flow?
we don't think so, Emlid flow only works with Emlid receivers, although you have plenty of applications similar to Emlid Flow on the Play Store
muy caro todavia
Actualmente es el equipo base rover con RTK más económico del mercado :)
Seguramente en los próximos años los precios se reduzcan.