Видео

Thank you for your feedback. Visit out website for more tutorials www.ardusimple.com/blog/

@@ardusimple thanks 👍

Dear customer, thank you for your positive feedback! We're glad to hear you're satisfied with our RTK technology's balance of low cost and high accuracy. Could you help us spread the word by sharing your experience? A review on Google would be immensely helpful and allow others to learn about our services through your insights! This is a fast link to write a review maps.app.goo.gl/DFaKn6vjGCiBo2487

@@ardusimpleI did already 😀👍

@@mottilein2010 Thank you!

we understand this comment is not related to this video, but to another ardusimple product. for technical support, thanks for writing a message to my colleagues at info@ardusimple.com, they will reply to you in less than 24h.

Actually we already have a generic one, but is also compatible with simpleRTK3B Budget (Unicore UM980): ruclips.net/video/GzCFpW_kt6Q/видео.html

You can power the board from the iPhone's USB-C, but the actual connection to SW Maps will have to be done over Bluetooth Low Energy.

Yes, this boards can be used as an RTK base as well as a rover. To help to configure it as a vase, we have prepared a guide. Go to 'Configure as a Base'' on www.ardusimple.com/how-to-configure-unicore-um980-um981-um982/

Thank you for your feedback! 6 years ago such a kit was 15'000$... we believe we did an effort in reducing the market price for this technology... maybe in 5 more years it can be even more affordable!

simpleRTK3B Compass doesn't support HDT message, heading is available in UNIHEADING message. HDT feature is currently only available in simpleRTK3B Heading: www.ardusimple.com/product/simplertk3b-heading/

it must charge and read and write from the connected devive ,or it doesnt do charge and otg at same time

@@katiekumcgil if your phone supports OTG while being charged (some old phones don't support this feature), with this cable you will be able to charge your phone and connect your USB device to your mobile phone (headset, USB stick, external GPS, etc) at the same time.

@@ardusimple thankyou very much ,i have actually looked at the manuals today for alot of new phones ,and still there are not many usb c phones that support this samsung appears to be the best supported of all phones

Hello, this depends on how each app does it. Most of the apps will geotag the pictures on the same file as the picture.

Hello, with PointPerfect the accuracy is slightly worse than with regular NTRIP corrections. To improve the vertical accuracy make sure your GNSS antenna is in a location with perfect view of the sky.

​​@@ardusimple Hello, I tried the method in this video and now It works perfectly (1cm horizontal and 2cm vertically). So I guess the problem was using only swmaps without gnss master (I was using the pointperfect ntrip correction the whole time).

Yes, if you have access to RTK correction service (NTRIP), you only need one of these starter kits to achieve centimeter accuracy. if you would like to setup your own base station, sheck this page for Base+Rover kits www.ardusimple.com/rtk-starter-kits/

Sure, you can even bring it with you on a vehicle and move around :)

the kit is powered by your mobile phone, you can travel around with the kit connected to the mobile phone. From our experience any smartphone can stand 8h of work under these conditions.

Yes, it can be used like this but the pins are very small. For manual wiring we recommend simpleRTK2B Budget www.ardusimple.com/product/simplertk2b/ or Pro www.ardusimple.com/product/simplertk2b-pro/. simpleRTK2B Micro is recommended for PCB integration.

@@ardusimple so, i can wire this with a esp32 in a PCB or any other board?

@@DanielEduardoToviasAlani-ef6uw yes, correct

yes, we have tutorials who to connect our board to Raspberry Pi www.ardusimple.com/connect-your-simplertk2b-to-a-raspberry-pi/ and Arduino www.ardusimple.com/how-to-connect-ardusimple-simplertk2b-3b-receivers-to-arduino/ If you have any issues or questions, just write to suport info@ardusimple.com

@@ardusimple thank you so much!!!

@@ardusimple thank you so much!!

Yes, you can use this kit with Pixhawk ardupilot, there is a JST connector to connect to it. In case you have any questions, feel free to write to our support info@ardusimple.com

@@ardusimple where can i get a spesific tutorial rtk gps for pixhawk start mission planner? I need for competition please

@@naufalnajib6843 I invite you to check our tutorials www.ardusimple.com/?s=ardupilot . If you have any questions, write to our support team info@ardusimple.com

Thank you for sharing this issue. We were not reported this issue until your message, and we didn't observe it ourselves. Maybe it has to do with a specific version of u-center combined with a board configuration, but it's just a guess. If you would like to trobleshoot it my colleagues at info@ardusimple.com will be happy to help you. We will keep an eye on this, and update the video if we see this issue reported more. Your message will definitely help other users that might experience the same behavior, thank you.

Not a straightforward task... - If you have a preferred service provider, simply ask them for this information. - If you are looking for service provider, you can use this database to check the options in your country. First look for a base station near you, and then enter in the specification sheet of that base station. It is usually mentioned there: www.ardusimple.com/rtk-correction-services-in-your-country/

As far as we know the technology of Samsung S24 with centimeter accuracy is for distance measurement based on local beacons, for example for navigation in a shopping mall. It's not for outdoor positioning with GPS, in these conditions its precision is of 1-2-3 meters. If you have some different information let us know so we can review it. One example use case of this technology can be to confirm if your neighbor built its fence on your piece of land, by comparing the location of the fence with the maps of the local cadaster

@@ardusimple I am not sure either, anyway I need GPS for outdoor navigation checking the cadastral maps on plots of land. 1-2 m accuracy is just fine...

@@Manolo8949 If 1-2 meters is enough, you can still use the phone. But if at some point you need more accuracy, you know how to find it! you will find more options of professional kits here www.ardusimple.com/professional-sets/

you can choose, there's a checkbox in the app that allows you to choose if you want to store the settings permanently or only until next powerdown.

Seems you are only missing to connect to a local base station that provide RTK corrections. You can check a database of base stations here: www.ardusimple.com/rtk-correction-services-in-your-country/

@@ardusimple Thanks, Please be aware that the link for CENTIPEDE on your above page is not correct.

@@dronetoulouse Thank you for noticing and letting us know. The link is already fixed.

Unfortunately iOS currently doesn't support replacing the internal GPS by an external one. With iPhone what we can propose it to use a separate app that does support external GPS: www.ardusimple.com/how-to-connectrtk-receiver-to-ios-device-iphone-ipad-or-ipod-via-bluetooth/

hello, we don't really understand your question. Right now we support u-blox, Septentrio and Unicorecomm modules with the SBC, but the SBC can also be connected to any other GNSS receiver that has a UART, RS232, CANBus or Ethernet interface.

You do not need a base if you connect your receiver to NTRIP correction service via internet using your PC. You will find tutorial how to do that here: www.ardusimple.com/simplertk2b-performance-in-standalone-mode-and-ntrip-corrections/ If you can not find NTRIP service close to you, you can check this list of services available in specific country www.ardusimple.com/rtk-correction-services-in-your-country/

You can order simpleRTK2B - Basic Starter Kit here: www.ardusimple.com/product/simplertk2b-basic-starter-kit-ip65/

Thank you for your question! You can actually use any of the 2 with a different purpose: - POWER+GPS will give you access to the GPS data from a PC. - POWER+XBEE is useful to power the board via wall adapter, and then have the POWER+GPS free, in case sometimes you want to connect with the PC to check or change parameters. Both can be connected at the same time without problem.

You can enable the translation of subtittles. Just go to the Settings -> Subtittles-> Autotranslate and Choose the language which you prefer

Welcome aboard!

What is approximately cost of it?

Thanks for sharing your experience. The results you mention might be specific to the postprocessing software algorithm being used. Could you share with the community which one are you using? With the integrated realtime rtk engine (u-blox or Septentrio) from our experience the receiver is able to discard these lower elevation satellites automatically, and there is no need for manually adjusting these settings.

We appreciate your feedback! In our personal life we are also techies and we understand it completely. Let us clarify that this is not a product for diy but rather for industrial companies looking into saving development costs. Usually there is a lot of technical support involved in a canbus integration which we also offer for free together with the purchase of the product.

@@ardusimple if you offer the support it makes sense i suppose :) from a industrial customer standpoint working as a planer for bmw i totally get that there is the market for it and you also wanna earn your money. still it needed to be said

That is to say don't use tools as you might break the antenna connector

Thanks!