I got a idea coming for the box blade again. I think 🤔 you and Ross are going to like it. This will be my first winter 🥶 with a box blade. Have a great night 😁👍🚜💨💡
I think I'm going to make some garden beds next year. And use my box blade. You are correct about the peddle torque comment. Well done my friend. I tend to just blip the loader stick to settle the load instead of the breaks.
That will be interesting to see Ross. Ok thanks for letting me know. It is neat how the more seat time you get the less you have to think 🤔 about what you are doing 😂 This video was 28mins when I started. I just saved 10 minutes of your life 🤣👍🚜💨🍻
I'll keep following. I'm in South east British Columbia Canada. Already had a snow and 0 degrees Celsius most of the time now. I've given in to winter, my outdoor activities are on hold until next April. Thanks for another interesting video.
Thanks 👍 Yep people just think it is ok to trespass. Maybe if they offered to pay my taxes then I would give permission😂 but that’s not going to happen. Have a great night 😁👍🚜💨💡
Good day eh!!! The pad is sure looking good. You did a nice job breaking up the frost lumps in the covering. The compacting did a nice job too. That should be good come next spring eh!!! Take care!!!
Thanks 👍 We put it there so it can not be seen by anyone from the road😁The sand was free too 😂 thanks for checking out the video have a great Sunday 😁👍🚜💨💡
Thanks 😁👍 I agree and it will make the edge of the bucket stronger too I get a lot of flex with this light Material bucket. Thanks for checking out the video 😁👍🚜💨🍳
Looking good Mitch! Funny how fast things freeze as soon as the days get so short! It's good you got as much done as you did. By spring after a freeze thaw cycle, you'll be good putting some rock down. Great job editing! Cheers!
Thanks Mike👍 I was not ready for it to be frozen🥶 and the short day did not help wanted to go over it with the compactor one more time. Oh well 😂 have a great week😁👍🚜💨💡
Thanks 👍 we like the spot because it is close to the power and you can’t see it from the driveway. I have to say it is nice to have the tamper available when I need it. Have a great week 😁👍🚜💨💡
I can’t believe you don’t have 500k subscribers! You always either invent or improve your tools or your tractor implements, and somehow you make me laugh. Stay safe and warm and enjoy your holidays.
Thank you very much I appreciate your comment and support. I am having fun sharing my ideas. Plus joking 🙃 around helps keep it on the sunny side 😂👍you stay safe and have a Merry Christmas and a Happy New Year 🚜💨💡
Turned out really good I think, in the future make it easier on yourself dump the dirt in a pile and use the back side of the box blade to level out like a dozer. But awesome video.
Nice job Mitch. So you're towing the tractor with the RV? That's a great combo! For the record, seems to me that the only people we should expect to spread stone like professionals is....well...professionals! I could certainly be better at it than I am!!!
Thanks Chris 👍 We just sold our travel trailer. Got tired towing both the tractor and camper twice to stay at the property. Yep I am definitely not a pro but I can dream! Have a great evening.😂👍🚜💨💡
Thanks Ed👍 We will be just go with crushed stone for now. The future building site is up the hill behind the shipping container. The tamper is pretty useful I have lots of future projects for it. Thanks for leaving a comment. Have a great evening😁👍🚜💨💡
QUESTION: Did the jacks on the rear of your trailer comes stock or did you add them? Welded or bolted on? If you added them, do you have a product link and/or install video? I'm looking for some. Thanks Mitch! 👍🙂
The trailer came with the rear jack I can make a Quick close up video so you can see the jacks and how they are mounted if you want. It would be easy to have your neighbor weld on. Have a great Sunday😁👍🚜💨💡
Thanks 👍 I made a video on how I made it. The title is B2601 tractor front tie down point. Hope that helps. Have a good evening. Thanks for checking out the video 😁👍🚜💨💡
Nice job, Mitch & Jamie! Yep, that topsoil looks great. I wish we had soil like that here. So you mentioned clean rock as a surface. Why not minus? Just curious. Thanks for sharing! :)
Thanks David 👍 I am thinking 2”inches of 1/2”inch clean rock so we won’t drag the fines or sand and slurry into the RV. Thanks for checking out the video. Have a great weekend 😁👍🚜💨💡
Afternoon Mitch, very nice work you did there. Looked like the top of the dirt pile was pretty frozen. I've probably asked you this but how long is your trailer? I'm looking at getting one a little longer. Mine is only a 16 foot. Keep up the awesome work. This was an excellent video. Take care buddy. ✌
It surprised me how frozen the pile of rocks/dirt was - I thought the rocks in the soil would make it easier to break apart. Also what is the size of your trailer and the estimated total weight with the b2601 on it (to get an range of towing weight needed for a tow vehicle).
Thanks for checking out the video. Roughly the B2601 with the box blade and loader with bucket is just under 3K. The trailer is a 20’foot 10K rated and is about 2700lbs empty total with B2601 and attachments is 5700lbs roughly estimated of course. Have a great weekend 😁👍🚜💨💡
@@MJADoingStuff Thanks. I have a TRD Sport Tacoma (towing rated up to 6800 lbs). Wished I got the Tundra. If I got a tractor it would be the B2601 and just tow less than 10 miles.
Thanks👍 I lucked out that it was not worse and it warned up a little. In spring I will put some 1/2 clean rock on top. Should help from tracking sand into the RV Thanks for checking out the video👨🏭🚜💨💡
Please like and Subscribe and help us Win the RUclips Lotto!!! 🤪👍🚜💨💡
I aways love see the 🚜 box blade at work, it is still my favorite all purpose tool. 👍👍
I got a idea coming for the box blade again. I think 🤔 you and Ross are going to like it. This will be my first winter 🥶 with a box blade. Have a great night 😁👍🚜💨💡
Another quality video Mitch. Thanks and stay safe.
Thanks 👍also thanks for checking out the video and leaving a comment. You have a great holiday season!!!😁👍🚜💨💡
I think I'm going to make some garden beds next year. And use my box blade. You are correct about the peddle torque comment. Well done my friend. I tend to just blip the loader stick to settle the load instead of the breaks.
That will be interesting to see Ross. Ok thanks for letting me know. It is neat how the more seat time you get the less you have to think 🤔 about what you are doing 😂 This video was 28mins when I started. I just saved 10 minutes of your life 🤣👍🚜💨🍻
Awesome video again mitch! 👏 you keep that tractor so clean! Have a good day guys.
Thanks Pete👍Stays pretty clean when you rub it on tree's🤪You have a go one too.
You’re a great multitasker Mitch, you did a great job 👍🏻👍🏻. Have a great week 🙋🏼♂️🙂👍🏻
Thanks Luc👍I think I need more seat time😂 you have a great week too😁👍🚜💨💡🙋🏻♂️
I'll keep following. I'm in South east British Columbia Canada. Already had a snow and 0 degrees Celsius most of the time now. I've given in to winter, my outdoor activities are on hold until next April. Thanks for another interesting video.
Your welcome 👍 Thank you for leaving a comment. I am ready for the snow but don’t want it to start yet 😂 Have a great Sunday 😁👍🚜💨💡
This is borderline tractor therapy. Simple, straightforward, eye-pleasing results. Good job!
Thanks Logan👍 It took along time to edit 😂 thanks for the support man have a great evening 😁👍🚜💨💡
💥 Looking good Mitch and Jamie! Thanks for the tractor time. I needed it! 👍 great closing shot!
*Keep on tractoring!*
Thanks Jon 👍 I needed it too already getting cabin fever 🤒😂Thanks I was surprised that it was so clean under there. Have a great Sunday! 😁👍🚜💨💡
That looked like a fun project with lots of seat time. Great video, I loved the tractor action
Thanks 👍 seat time is the best thanks for checking out the video have a great day 😁👍🚜💨💡
Great video Mitch very entertaining. Seems we all challenges with trespassers, when we have a bit of land.
Thanks 👍 Yep people just think it is ok to trespass. Maybe if they offered to pay my taxes then I would give permission😂 but that’s not going to happen. Have a great night 😁👍🚜💨💡
The jack on the back of trailer...great idea
Yeah I learned that from a viewer😁👍 thanks for checking out the video 😁👍🚜💨💡
Good day eh!!! The pad is sure looking good. You did a nice job breaking up the frost lumps in the covering. The compacting did a nice job too. That should be good come next spring eh!!! Take care!!!
Thanks Mike 👍 I hope so already can’t wait till next season 😂 I ran out of time to do another pass with the compactor. Have a great night 😁👍🚜💨💡
Looks like it’ll be a nice spot for your RV. Good job on the compacting. Using the sand was a good idea.
Thanks 👍 We put it there so it can not be seen by anyone from the road😁The sand was free too 😂 thanks for checking out the video have a great Sunday 😁👍🚜💨💡
Great job so far a piranha toothbar for your loader bucket will make digging soo much easier. 👍
Thanks 😁👍 I agree and it will make the edge of the bucket stronger too I get a lot of flex with this light Material bucket. Thanks for checking out the video 😁👍🚜💨🍳
Looking good Mitch! Funny how fast things freeze as soon as the days get so short! It's good you got as much done as you did. By spring after a freeze thaw cycle, you'll be good putting some rock down. Great job editing! Cheers!
Thanks Mike👍 I was not ready for it to be frozen🥶 and the short day did not help wanted to go over it with the compactor one more time. Oh well 😂 have a great week😁👍🚜💨💡
Nice work! I’ve really been considering purchasing a plate compactor. I think I could find some great uses for one. That made a really nice RV site!
Thanks 👍 we like the spot because it is close to the power and you can’t see it from the driveway. I have to say it is nice to have the tamper available when I need it. Have a great week 😁👍🚜💨💡
I can’t believe you don’t have 500k subscribers! You always either invent or improve your tools or your tractor implements, and somehow you make me laugh. Stay safe and warm and enjoy your holidays.
Thank you very much I appreciate your comment and support. I am having fun sharing my ideas. Plus joking 🙃 around helps keep it on the sunny side 😂👍you stay safe and have a Merry Christmas and a Happy New Year 🚜💨💡
Turned out really good I think, in the future make it easier on yourself dump the dirt in a pile and use the back side of the box blade to level out like a dozer. But awesome video.
Thanks Andy👍 I knew I was doing it the hard way. Now I want to go practice 😂have a good day 😁👍🚜💨💡
Nice job Mitch. So you're towing the tractor with the RV? That's a great combo!
For the record, seems to me that the only people we should expect to spread stone like professionals is....well...professionals! I could certainly be better at it than I am!!!
Thanks Chris 👍 We just sold our travel trailer. Got tired towing both the tractor and camper twice to stay at the property. Yep I am definitely not a pro but I can dream! Have a great evening.😂👍🚜💨💡
Looking good, Mitch and Jamie! Will you pour a pad eventually, or just keep crushed stone? How cool to have your own tamper!
Thanks Ed👍 We will be just go with crushed stone for now. The future building site is up the hill behind the shipping container. The tamper is pretty useful I have lots of future projects for it. Thanks for leaving a comment. Have a great evening😁👍🚜💨💡
I wish I had a pile of sand like that
It does come in handy. Thanks for watching 😁👍🚜💨☀️
QUESTION: Did the jacks on the rear of your trailer comes stock or did you add them? Welded or bolted on? If you added them, do you have a product link and/or install video? I'm looking for some. Thanks Mitch! 👍🙂
The trailer came with the rear jack I can make a Quick close up video so you can see the jacks and how they are mounted if you want. It would be easy to have your neighbor weld on. Have a great Sunday😁👍🚜💨💡
I like that nose ring you use for tie down on the front, mind sharing the source?
Thanks 👍 I made a video on how I made it. The title is B2601 tractor front tie down point. Hope that helps. Have a good evening. Thanks for checking out the video 😁👍🚜💨💡
Awesome
Thanks Jose😁👍Have a great weekend 🚜💨🍳
I hope you raised your scarafiers before grading using box blade on stone over the fabric?
Yep 👍 I did. Forgot to show that part 😂 thanks for calling that out. Have a great Sunday!!😁👍🚜💨💡
Nice job, Mitch & Jamie! Yep, that topsoil looks great. I wish we had soil like that here. So you mentioned clean rock as a surface. Why not minus? Just curious. Thanks for sharing! :)
Thanks David 👍 I am thinking 2”inches of 1/2”inch clean rock so we won’t drag the fines or sand and slurry into the RV. Thanks for checking out the video. Have a great weekend 😁👍🚜💨💡
Afternoon Mitch, very nice work you did there. Looked like the top of the dirt pile was pretty frozen. I've probably asked you this but how long is your trailer? I'm looking at getting one a little longer. Mine is only a 16 foot. Keep up the awesome work. This was an excellent video. Take care buddy. ✌
Thanks 👍 Kyle the trailer is 20’ foot long and it is 10K rated. Thanks for checking out the video. Have a great week😁👍🚜💨💡
It surprised me how frozen the pile of rocks/dirt was - I thought the rocks in the soil would make it easier to break apart.
Also what is the size of your trailer and the estimated total weight with the b2601 on it (to get an range of towing weight needed for a tow vehicle).
Thanks for checking out the video. Roughly the B2601 with the box blade and loader with bucket is just under 3K. The trailer is a 20’foot 10K rated and is about 2700lbs empty total with B2601 and attachments is 5700lbs roughly estimated of course. Have a great weekend 😁👍🚜💨💡
@@MJADoingStuff Thanks. I have a TRD Sport Tacoma (towing rated up to 6800 lbs). Wished I got the Tundra. If I got a tractor it would be the B2601 and just tow less than 10 miles.
I think you did a fine job considering your material was half Frozen
Thanks👍 I lucked out that it was not worse and it warned up a little. In spring I will put some 1/2 clean rock on top. Should help from tracking sand into the RV Thanks for checking out the video👨🏭🚜💨💡
@@MJADoingStuff there you go the half inch clean Rock will work great
Wisconsin huh? I live in the SE corner….
Sweet👍 we plan to retire there one day have a great weekend 😁👍🚜💨🥶
Would love to come and help you out.
We’re out in Minnesota how far are you?