Making a Tig torch. I tried to build in my home work shop?
HTML-код
- Опубликовано: 21 сен 2024
- Hi, welcome to Ambros custom. In this video, I am showing how you can build your custom Tig torch. This torch I have made from copper rod having dia 20mm x Lenght 36mm copper rod and Refrigeration copper pipe with 5/8" OD tube and Length 6". I used silver solder to connect both my rod and tube. For gas, I used a 1/8" OD tube with a Lenght 7".
The whole copper body of Tig torch I covered with glass fiber. I have found that glass fiber can resist the highest temperature.
I have made my Tig torch in such a way that you can disconnect the tig torch with wire and gas pipe.
For gas, I used an 8 mm OD pneumatic polyurethane pipe and a brass fitting to connect the PU pipe to the argon cylinder.
At the end whole body, I have painted with golden paint.
Overall I could make my design slicker. It looks like a jet car. But I am happy with the work I did. I tried to build that stuff which I can buy on the price which I spend for making and material. But the most important thing I learned a lot from my stuff. I got many ideas which I use in my upcoming build.
This is the coolest thing I've seen in a while, and I basically live at a makerspace with about 600 members.
You really put your heart into making this item Sir. Well done fella for sure.
Thanks man:)
That's Osm.Just love the Golden finish..only Mech Men can feel it.
very nice very good
Great job
This project is very good!
Thank you sir:)
Nice work! That's awesome!
Thank you sir.🙏
Inventara la rueda ota vez?
Awesome!
Grate idea 🤓
Tried? Looks like you succeeded! How does it handle heat? can you run it for a while without the hot glue getting soft? That's really, really cool and I feel inspired.
👍👍👍👍👍👍👍👍
That's call efforts
I manufacture it in original fiber
Amazing💥💥💥💥
You can glow hot and put it on oil to carbonate it and to make it high temp durable
Goood
From the thumbnail it almost looked like a tobacco pipe.
Hahaha.......yeah it's actually looks like that
What is the role of the spark?
A Dam good effort there Bro , well impressed 😁😁😁🤘🤘🤘
Thanks pal,😇
印度的能工巧匠。
👌👌
هل يعمل بالهواء دون اكسجين
👍
Which material you used MS or any other
It's copper.not MS
It takes so much time and work just to make the 1 hole and tap it... People that don't do this themselves have no idea.
Thank you buddy. After a long time I finally able to see you on YT
The maker is absolutely blessed by God of Artisans & creators Bhagwan Vishvakarma...!??
Thanks for the words brother 🙏
La verdad es que eres un soquete por 200€ que Bale una antorcha refrigerada te pones a perder el tiempo
VOZ lo perdez sin hacer nada!
Fake
Where'd you get that idea😂? Tig torches have been around for ages and they are pretty simple in design. This absolutely would work. You obviously know nothing about welding. Go back to your basement dwelling and sit in the corner to think about your bad attitude.
👍