I always though locks were there to convince the halfway shady character that he's better off trying to be an honest man than having the whole neighborhood see him busting the locks off somebody's shed to steal their lawnmower
Pro Tip: 18" Hydraulic Nut Splitter , Set of large open box wrenches, Ram gun with 27cal blanks, Industrial grade magnets, Coat hanger and a empty beer can. Can fit all in a laptop bag.
lmao the slight disappointment in his voice when he was expecting the lock to break but it broke his fence instead. "Damnit now I have to replace that"
I've been recommending these as a budget padlock for about 35 years, I have one on my shed (the shed you could open with a tin opener so security is a moot point) it gets used only in the summer and has been in use for over a decade with zero maintenance and is still as good today as the day it was installed.
I'm not sure how the algorithm directed me to these videos as I am a Chemical Engineer with not even a passing hobbyist interest in locks. But then I got hooked on these videos and have to admit I am close to ordering the lock pick kit just to have fun. One conclusion I have drawn from the various defeats of the broad range of locks included in the series is that no lock is able to withstand a determined attack. What they do is keep honest people honest. I've always thought about the merit of increased security doors on homes when a rock through the window is a faster way in anyway, which is exactly what happened at my work when they climbed through and then took the conference TV off the wall.
I'm actually more impressed by the mounting hardware used on the fence. The fact that the welded hasp broke before the fence, bolts/screws, or lock did is pretty surprising.
Hey Billy, How'd you get that big welt on the side of your head? I was playing Dodgeball with my dad and couldn't get out of the way of the wrench. Aren't you supposed to use a ball when you play dodgeball? Naw, dad says that doesn't offer enough motivation to get out of the way.
I also like this series. Most burglars don't pick locks. They use Brute Force, or bypass the lock completely, like jumping over the wooden fence... LPL is just showing us some of the more realistic attacks against locks by criminals. Looking at some of the gun locks he worked on, I would have to say the locks on his property are for your protection. 😂 Spoiler alert..... Oh no! The Super Hasp finally breaks 😨.
I read about the guys that go into an apartment building with a hockey bag containing a few sections of 4x4 and a hydraulic jack. An admittedly ballsy technique, ripe with risk of discovery during the minute or two it takes them to almost silently force a door open, but if they make it inside, they're golden. No skills required.
True. 99cent hammer, 99 cent miniature pry bar and 99 cents worth of wire can get u in just about anything. I used to do foreclosure renovations for a local credit unions mortgage dept. Never came across something "inaccessible". A Pipe wrench could've been useful a few times.
ahh another souloutin a mat...under that mat a plank..with a number of nails put through it..some one jumps.and well figure the rest...and yes have found a blood trail going back over fence
@@miguelcastaneda7236 That’s how i used to protect my lumber pile when I was building houses out in the desert drive nails through three eights plywood and lay it in front of the lumber and spread dirt on top of the plywood to hide it and let them back their truck over it
I’m at work currently and the company I work for wanted the lock cut off a unit, this trick just saved me having to drag my air lines and grinder out. So thank you sir!
I used to repair wheel magazines for an explosives company. There were two locks on the doors of these mags and you had to reach up and inside the bottom of a bottomless boxes welded to the door to get at the padlocks. The boxes prevented you from using a pipe wrench or a pry bar on the locks. Another very good method of preventing someone from using force of this kind is to put the lock and the hasp inside the door. You cut a hole about six inches in diameter through the door so that you can reach in to unlock the padlock but the placement of the hole precludes the use of a lever tool since you cannot move your arm to operate it. The hole is covered with a tear drop shaped cover that gravity holds in place to keep the rain out. Most hasps can be defeated with a file or battery powered grinder, a pin punch, and a small hammer. Simply remove the riveted over edge on the top or bottom of the hinge pin with the file or grinder and drive the pin out. Hasp falls apart an in you go. Exposed hinges are much the same.
When nothing breaks and he can't get in with the wrench: "I still don't recommend using this lock because I can easily get in by using this truck to drive through the fence."
@@flyingtentacle7631 the point being that a security system is only as good as its weakest link. Kind like morons who buy expensive ass locks and chains for motorcycle wheels and then act surprised when someone just lifts the whole thing into the back of a van
@@user-nb8yt2il2r the point is that he won't reccommend the lock even though he couldn't show us any security issues with this one. In this case he wouldn't even reccomend the best lock worldwide with this kind of video. He should've told us about "the weakest link" but not that he can't recommend this lock. (Sorry for bad english. Not a native speaker...)
@@Vukage you are exactly right. I've been on a LPL streak recently and the impression that I got is that he is kind of an autistic prick. He basically doesnt reccomend any lock and shits on all lock companies just because he is an extremely talented lockpicker. Doesnt mean that the local crackhead that wants to steal you bike has the means to actually get past you 10$ chinese bike lock.
Fr though he spent a full minute twisting and the bargain bin chinese padlock was unharmed, if there's no video showing that the lock can get raked by an amateur that lock's a bargain, just put it on a real door.
My son is watching with me today and he said “what if he is using these videos as a cover to break into things”. Like he’s suggesting that’s not your shed. It was funny to think about.
If he sets up a camera first and narrates his breaking and entering, I wonder if passersby would just think he was doing a youtube video and he’s allowed to be there?
the cleverest setup I've seen for the disc padlock is to surround it with a short piece of heavy steel pipe, so that the lock is not susceptible to most types of mechanical attacks.
If it helps you to be really pissed off, as a 12 year old, this lock was the first I was ever able to pick. I used a bent/ flattened paperclip and a regular screwdriver lol
@@udonnomi6958 I bought a discus padlock made by Dekton from Yorkshire Trading Company for £3.99 and I picked it open within seconds of opening the packaging
Thank you. Cunning enough, these types of training videos for thieves really gives them a broader understanding of they’re craft without the need of a stay in the pen.
Yeah I am picturing a pipe under the sink starting to leak and the guy who breaks into precision locks on the daily is like. Nope too complicated for me gotta call a plumber.
guy told class, he went to someone$$$$ house and the guy simply said, "screwdrivers dont fit my hand".... other guy was fix it guy, brought son into the fold... 6 months later son was out on his own making tax free money. i shd have gone out with him, but... good way to get sued so cant have nothing in our name... old van that no one wud want, work van, rent apt, keep dinero in... so they cant find it if sometjhing goes badly.
This man wears many hats, is known by many titles. Some call him Hasprendir. Some, Lockpicker the Wise. Whether his tales be spun in song or verse, his legend shall live on longer than that of Smaug the Golden who merely smote the door of Erebor in a fit of rage.
Have been waiting these type of test and proves my point ... why waste hundred on a huge padlock and then only spend 10 to buy a cheap chinese hasp that falls apart when you sneeze on them. Would like to see Abus 135/200 hasp in similar test ... is is worth over hundred dollar or not .
Interesting. I while in maintenance used to work around coworkers who would drill out bolt locks on entry doors. Seemed to take forever. I figured out to dimple the top and bottom of the lock casing with two sharp hammer blows, then id apply my pipe wrench and give it a firm turn ... Thelocks mounting bolts would snap and the lock turning would either unbolt the door or just disintegrate the plunger. Either way open within 20 seconds with hardly any noise. Occasionally on cheaper doors there may be some damage. But in a emergency it became my goto. Thank God now ive got you. Thanks for the help.
I've been doing the same thing! Just a tip though: pay extra close attention to where you bury your bike. Happened one too many times that I couldn't find it again after a night to the club
im 14 and this was very helpful , i used to see a round lock and think i couldnt get past it , my dad has a big wrench like that in the garage that i can use and he wont miss it .... thanks man , the stuff im going to get will be worth more cause thats why they use those expensive locks .... cool cool cool!!!!
Oh wow oh wow oh wow!!! I'm feeling so stupid right now. I used to think of those type of secondary weaknesses but I must be letting my guard down. Thank you for waking me up even if it's a little it's better to start somewhere.
I love this channel, I wonder how many crooks have received a better education from this channel😂. It's amazing to see that the stronger the lock, the weaker the next fail point becomes.
This points out the obvious: People often pay serious green for a "secure" hardened lock, then use a normal cheap hasp. Those things are mild steel, akin to a grade 2 bolt. The lock might be hard to cut, but offer no resistance to cheap Chinese bolt cutters or a $2 hack saw.
Thanks to you I now spend 30+ minutes in the lock aisle at home depot. Yes I've searched your channel for the ones I wanted to buy before I did. Pretty sad for a birdcage lock lol
I really enjoy and appreciate this test, I have a similar disk lock on a storage container box. I intend to beef up the box with a bar and recessed lock where implements can not reach it.
I use those on storage units. Basically you have to pick or destroy the door. Glad to see some validation of my choice. Only as secure as the hardware youre attached to
Mine storage with this lock was nearly broken into with crow bar they bent the metal so much I couldn't open the door when I removed the lock. Manybof the units near mine same thing. To me it looked like they could of gotten it ope. Of they pulled harder or had two people and two crow bars at once. But I don't think they got mine opne unless the facility pushed it closed. They are telling .e they didnt
In all fairness to the hasp, you have stressed that thing so much twisting all of those other locks that eventually it had to break at some point. Just a suggestion, but replace that hasp/gate lock and then give it another try with the same lock.
Yes, because everyone replaces a hasp each year or more often to make sure they aren't already stressed out. You aren't being very creative with your trolling if that's what your aiming for
Dosen't matter you can put a pipe on end of the wrench for unlimited amount of stress on the hasp and lock any way. It's a common thing to do with wrenches for bolts etc.
I was working for a fiber optics installation company. I ran the warehouse and did basic care on their fleet of vehicles. We had a man quit and he left locks on a bucket truck's tool bins. This had happened before and normally I took care of the problem with a pair of bolt cutters. However he had used Masterlock disc locks and with how they fit I couldn't get to the locks hasp to cut it. I broke the locks off with a hammer. It was harder than opening a normal padlock with a hammer and it totally destroyed the locks (often you can reuse a normal padlock after popping it with a hammer). I broke the hasps out the sides of the case. I didn't hurt the bins. On the other hand most Masterlocks are garbage, so other disc locks might have been much more of a challenge.
Seeing that the hasp broke and the padlock was unharmed "doesn't give much confidence that a disc padlock will provide significant additional protection" is an odd conclusion. For a door with a stronger hasp, he has no evidence that this disc lock is vulnerable to a twisting attack. Would need to test that first to draw any conclusions at all.
ROFLMFAO well now you've gone and done it. Nobody realized that the padlock is hardened but the things it goes through isn't.... now what? Lol love the work man
Great...just bought one of those locks as added security for my storage unit...now I won't sleep a wink. Excellent teaching video clip though, I sure learned something different.
Something isWrong Here. "Chinese Lock Did the Job" Wooden Door and Cheap Hardware Did Not Matched. Next Time Try to Do it On an Iron Door and Better Hardware . I'll recommended You to Use a Pipe-Tube on the Pipe-wrench handle for Bigger Lever. Or Bring a Can of SPINACH.
I’m not a regular to this channel, I just clicked on this video, but I LOVE it when people put huge locks on weak little hasps. Or even better, when the hinges of some doors can be taken off with a screw driver-ignoring the lock altogether.
LPL pulling bypasses like that is my favorite. When he's showing a cheap padlock and the video is barely 2 minutes, my first thought is "they didn't shield the keyway, he's gonna run a shim straight past the whole locking mechanism and just press the spot to open the shackle directly".
I have several Brinks Disc padlocks. One on my shed where I store my motorcycle, lawn mower, weed eater and leaf blower. and my tool box on wheels. I also keep my propane grill in the shed as well. I also made a motor powered dead bolt to secure the door to the other door I use large nails to secure the door to the floor and door frame.
If only you had a computer and access to all of the world's knowledge so that you could just type a word in and have the definition pop up on your screen... too bad nothing like that exists.
What does it take to please this man?? I watched him twist apart 5 prior locks, one breaks his welded staple, "not significantly better protection" compared to what? Fastening your doors shut with 3 inch drywall screws? Great vids.
Excellent videos. Any padlock need to buried inside a steel shroud cover / steel box which provide protection against physical force and access and also makes it very much more difficult for professional pickers. Such a great channel.
I had one of those locks on a storage unit once. I brought my friend with to help me move some stuff. I misplaced the key and when I went to go look for it in my car, he had already opened that lock before i could walk the 15 feet to my car to look for the key. I was in shock at how fast he got that open. It was just as fast as using a key. He said some of those disk locks are the easiest to pick and all he used was a blow dart with a bent tip. Ill never use one of those again.
A mechanics tool set is 150 bucks or so, a cordless drill or impact driver is another 100 or so. 24 inch pipe wrench~ $25. Even taking these to a shady pawnshop would pay for the wrench 3 fold on the first use.
If you saw someone walking down the street pushing a mower, would you assume theft and stop them? If you don't spot them taking it from your shed and no one sees them doing any obvious lockbreaking shenanigans, all they have to do is act casual and they've already won. Thief skills are only about 10% breaking and picking. The other 90% is manipulating the expectations of the honest. You will never be as good at predicting criminal behavior as they are at predicting yours because you probably have an honest job, whereas their job is to spend all day every day coming up with ways to get away with stuff that isn't theirs.
Many years ago I was working on a building site. When we came down from the scaffolding to get changed and go home, we found one of these circular padlocks on our lockup. It took us nearly an hour to cut it off with a lump hammer and chisel! (the only tools readily available) The incredible thing was, that nobody called the police! There we were in the street (this was in London) taking it in turns with the hammer. When we finally got in, we found that somebody had nicked half our tools.
![[760] The REAL Double Wrench Method Tested](http://i.ytimg.com/vi/oOSWXo9fpTI/mqdefault.jpg)
![[760] The REAL Double Wrench Method Tested](/img/tr.png)
![[150] Various Disc Padlocks Picked (Abus, Master, and More)](http://i.ytimg.com/vi/cm8p4CmeOfk/mqdefault.jpg)
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
![[1376] A Locksmith Couldn’t Open This - Find Out Why](/img/1.gif)
Hunny, our crazy lawyer neighbor is breaking into his shed again...
Lol not crazy. Just very serious about lock security
@@MatthieuAmherst so serious his lawnmower and chainsaw are now missing for some strange reason
"I wonder how he keeps losing his keys..."
BabyBenz
I need to remember not to read comments at night, i just woke up my wife with my laughter.
"This is the HaspBreakingLawyer and today I'll be using this disc padlock to attack this hasp."
Thanks for the laugh
About sums it up lol
Accurate
🤣😂🤣
No shit. Attack the hasp or carpentry first
My dad always said locks are only there to keep the honest man honest. If someone wants to get in bad enough they will
Barry Fields And he is right
Barry Fields My dad used to say the same thing
I always though locks were there to convince the halfway shady character that he's better off trying to be an honest man than having the whole neighborhood see him busting the locks off somebody's shed to steal their lawnmower
I see your dad and mine went to the same Dad School lol
Awesome
24" Pipe wrench? My burglary bag is so full at this point, I barely have room for any valuables.
For the valuables bring a sport Bag and put the tools ön your body. For me it works all the time.
replace the valuables with the wrench, buy a new wrench later after disposing of the valuables....
Pro Tip: 18" Hydraulic Nut Splitter , Set of large open box wrenches, Ram gun with 27cal blanks, Industrial grade magnets, Coat hanger and a empty beer can. Can fit all in a laptop bag.
Maybe the real larceny was the friends we made along the way.
@@b.arborio2404 you forgot the juice bottle
Glad to see the lock win for once!
Bill Gross what did it win hasp was no longer secured
I’ve cut these locks easily with a $5 saw the best thing to defeat a lock is with a common hand saw and four minutes
There is no post open gutting of the lock
Agreed. This time the lock won.
yeah but it's chinese why can't America build it ??
As he didn't do that twice, I cannot be sure this was not a fluke.
Underrated comment
😁
You are very wrong. He first did it with the bottom half of the shackle, then with the top part ;)
I love how LPL seem surprised the actual lock part held up.
lmao the slight disappointment in his voice when he was expecting the lock to break but it broke his fence instead. "Damnit now I have to replace that"
Surprised the wood didn't split first
Daniel Nicholson no the wood won't split as easy as you think you have eight screws with 4 of them giving a significant mechanical advantage
Dan Nicholson
I was expecting the wood screws to tear out, shear or crack the fence, myself!
Weakest link first.
@@kellybullock559 The wood was not Chinese....
LPL: “I broke the hasp on the gate in the yard.”
Mrs. LPL: “That’s nice, dear.”
guess who is going to fix it ... DEAR!!!!! u broke it.. u fix it. maybe u wont be so anxious to break things in the future
Yep, he broke the latching hinge, and not the lock. :) Lock 1, LPL 0
We're going to need a bigger hasp.
+LockPickingLawyer ABUS 130 hasp is darn near indestructible
Abus Granit Plus solid iron padbar hasp www.nothingbutlocks.com/Abus-135-200-Granit-Hasp-and-Staple-p/abu135200.htm
those hasps are riveted and are pretty much JUNK they slide the plate on it put it down it a press and done
it's you're.
mujhe ye tala kaha melega
I've been recommending these as a budget padlock for about 35 years, I have one on my shed (the shed you could open with a tin opener so security is a moot point) it gets used only in the summer and has been in use for over a decade with zero maintenance and is still as good today as the day it was installed.
I'm not sure how the algorithm directed me to these videos as I am a Chemical Engineer with not even a passing hobbyist interest in locks. But then I got hooked on these videos and have to admit I am close to ordering the lock pick kit just to have fun. One conclusion I have drawn from the various defeats of the broad range of locks included in the series is that no lock is able to withstand a determined attack. What they do is keep honest people honest. I've always thought about the merit of increased security doors on homes when a rock through the window is a faster way in anyway, which is exactly what happened at my work when they climbed through and then took the conference TV off the wall.
I'm actually more impressed by the mounting hardware used on the fence. The fact that the welded hasp broke before the fence, bolts/screws, or lock did is pretty surprising.
Do this again, but on a shipping container. Would like to see the results.
Yeah me too! 🙄
Yes good idea!
I would like to see that as well.
@@jwalker7567 that's why we're asking, that bloody thing Is hard to get past 🙄😅🤣
You have to torch the lock first on c can will make life little easier
My dad always said that if you can dodge a wrench you can dodge a ball
Dude so did my dad! Whaaaaaat???!!?!
If you can dodge traffic, you can dodge a ball
You guys must have some of those really sadistic gym teachers for dads.
Hey Billy, How'd you get that big welt on the side of your head?
I was playing Dodgeball with my dad and couldn't get out of the way of the wrench.
Aren't you supposed to use a ball when you play dodgeball?
Naw, dad says that doesn't offer enough motivation to get out of the way.
Dodge, dip, duck, dive, and dodge!
I also like this series. Most burglars don't pick locks. They use Brute Force, or bypass the lock completely, like jumping over the wooden fence... LPL is just showing us some of the more realistic attacks against locks by criminals. Looking at some of the gun locks he worked on, I would have to say the locks on his property are for your protection. 😂
Spoiler alert.....
Oh no! The Super Hasp finally breaks 😨.
I read about the guys that go into an apartment building with a hockey bag containing a few sections of 4x4 and a hydraulic jack. An admittedly ballsy technique, ripe with risk of discovery during the minute or two it takes them to almost silently force a door open, but if they make it inside, they're golden. No skills required.
True. 99cent hammer, 99 cent miniature pry bar and 99 cents worth of wire can get u in just about anything. I used to do foreclosure renovations for a local credit unions mortgage dept. Never came across something "inaccessible". A Pipe wrench could've been useful a few times.
ahh another souloutin a mat...under that mat a plank..with a number of nails put through it..some one jumps.and well figure the rest...and yes have found a blood trail going back over fence
For wooden stockcade fence I tap in inch& a half wire nails cut off the heads and bless them with dog poo ...
@@miguelcastaneda7236 That’s how i used to protect my lumber pile when I was building houses out in the desert drive nails through three eights plywood and lay it in front of the lumber and spread dirt on top of the plywood to hide it and let them back their truck over it
I’m at work currently and the company I work for wanted the lock cut off a unit, this trick just saved me having to drag my air lines and grinder out. So thank you sir!
I used to repair wheel magazines for an explosives company. There were two locks on the doors of these mags and you had to reach up and inside the bottom of a bottomless boxes welded to the door to get at the padlocks. The boxes prevented you from using a pipe wrench or a pry bar on the locks.
Another very good method of preventing someone from using force of this kind is to put the lock and the hasp inside the door. You cut a hole about six inches in diameter through the door so that you can reach in to unlock the padlock but the placement of the hole precludes the use of a lever tool since you cannot move your arm to operate it. The hole is covered with a tear drop shaped cover that gravity holds in place to keep the rain out.
Most hasps can be defeated with a file or battery powered grinder, a pin punch, and a small hammer. Simply remove the riveted over edge on the top or bottom of the hinge pin with the file or grinder and drive the pin out. Hasp falls apart an in you go. Exposed hinges are much the same.
LPL: Even when locks do work, they're still worthless because of what they're attached to.
When nothing breaks and he can't get in with the wrench: "I still don't recommend using this lock because I can easily get in by using this truck to drive through the fence."
@@flyingtentacle7631 the point being that a security system is only as good as its weakest link. Kind like morons who buy expensive ass locks and chains for motorcycle wheels and then act surprised when someone just lifts the whole thing into the back of a van
@@user-nb8yt2il2r the point is that he won't reccommend the lock even though he couldn't show us any security issues with this one. In this case he wouldn't even reccomend the best lock worldwide with this kind of video. He should've told us about "the weakest link" but not that he can't recommend this lock. (Sorry for bad english. Not a native speaker...)
@@Vukage you are exactly right.
I've been on a LPL streak recently and the impression that I got is that he is kind of an autistic prick. He basically doesnt reccomend any lock and shits on all lock companies just because he is an extremely talented lockpicker. Doesnt mean that the local crackhead that wants to steal you bike has the means to actually get past you 10$ chinese bike lock.
Fr though he spent a full minute twisting and the bargain bin chinese padlock was unharmed, if there's no video showing that the lock can get raked by an amateur that lock's a bargain, just put it on a real door.
My son is watching with me today and he said “what if he is using these videos as a cover to break into things”. Like he’s suggesting that’s not your shed. It was funny to think about.
I hope you put very good locks on your son's door then...although it won't really matter if the lockpickinglawyer chooses him for his next video
If he sets up a camera first and narrates his breaking and entering, I wonder if passersby would just think he was doing a youtube video and he’s allowed to be there?
That's only funny to THINK about
The mind of a future convict at work.... LOL... kids will say the strangest things...
the cleverest setup I've seen for the disc padlock is to surround it with a short piece of heavy steel pipe, so that the lock is not susceptible to most types of mechanical attacks.
This one is a classic on padlocks in Europe ! Work like a charm, the lock can only be picked (not many people know how to) or drilled (extremely loud)
*starts video*
*sees video is 2 minutes long*
Oh this is gonna be good...
It's why I clicked lol. I loved the Ramset video
I rely on these locks and I thought I was about to be really pissed off but instead I was pissed on, and it was more soothing.
If it helps you to be really pissed off, as a 12 year old, this lock was the first I was ever able to pick. I used a bent/ flattened paperclip and a regular screwdriver lol
Luckily there arent anyone near my locks that have wanted to cut or grind or pick them.
@@udonnomi6958 I bought a discus padlock made by Dekton from Yorkshire Trading Company for £3.99 and I picked it open within seconds of opening the packaging
Thank you. Cunning enough, these types of training videos for thieves really gives them a broader understanding of they’re craft without the need of a stay in the pen.
And it also educates the average person that a simple lock alone is not adequate protection.
This is how firefighters are taught to get locked doors open, but they use a Halligan tool.
That’s probably how all lawyer’s pipe wrenches look: never used.
😂
Hahaha
Yeah I am picturing a pipe under the sink starting to leak and the guy who breaks into precision locks on the daily is like. Nope too complicated for me gotta call a plumber.
Sharp teeth on that new wrench/stilson! A 36" wrench would have been less effort on the arms! 😂
guy told class, he went to someone$$$$ house and the guy simply said, "screwdrivers dont fit my hand".... other guy was fix it guy, brought son into the fold... 6 months later son was out on his own making tax free money. i shd have gone out with him, but... good way to get sued so cant have nothing in our name... old van that no one wud want, work van, rent apt, keep dinero in... so they cant find it if sometjhing goes badly.
Doesn’t this make him the “ hasp destroying lawyer “ now ?
This man wears many hats, is known by many titles. Some call him Hasprendir. Some, Lockpicker the Wise.
Whether his tales be spun in song or verse, his legend shall live on longer than that of Smaug the Golden who merely smote the door of Erebor in a fit of rage.
I like to refer to this as "hasp picking," but "HaspPickingLawyer" doesn't have a good ring to it.
A story about chains and their weakest link...
what chain
"You are the weakest link, Goodbye"
Disk lock, Best cheap lock in the market place today!! Have been for decades!!!!!💪👍🇬🇧
Finally a lock winner - hip hip hurrah :-)
Have been waiting these type of test and proves my point ... why waste hundred on a huge padlock and then only spend 10 to buy a cheap chinese hasp that falls apart when you sneeze on them.
Would like to see Abus 135/200 hasp in similar test ... is is worth over hundred dollar or not .
Interesting. I while in maintenance used to work around coworkers who would drill out bolt locks on entry doors. Seemed to take forever. I figured out to dimple the top and bottom of the lock casing with two sharp hammer blows, then id apply my pipe wrench and give it a firm turn ... Thelocks mounting bolts would snap and the lock turning would either unbolt the door or just disintegrate the plunger. Either way open within 20 seconds with hardly any noise. Occasionally on cheaper doors there may be some damage. But in a emergency it became my goto. Thank God now ive got you. Thanks for the help.
At this point, I’ve given up on locks to secure my stuff, just gonna bury my stuff and hope for the best
I've been doing the same thing! Just a tip though: pay extra close attention to where you bury your bike. Happened one too many times that I couldn't find it again after a night to the club
@@kobaltskii Next: The Yard Digging Lawyer.
out of sight, out of mind !
The lock, vault and big turndial on the wall are decoys in place to distract you. The valuables are buried under the welcome mat 👍
Pro tip: after covering up with dirt, draw a big X on the ground so you can write it on a map!
im 14 and this was very helpful , i used to see a round lock and think i couldnt get past it , my dad has a big wrench like that in the garage that i can use and he wont miss it .... thanks man , the stuff im going to get will be worth more cause thats why they use those expensive locks .... cool cool cool!!!!
I like how he went out and bought a pipe wrench specifically for breaking pad locks
IDK if he did, most people I know (at least most older people) have one.
Tax deductible expense.
Oh wow oh wow oh wow!!!
I'm feeling so stupid right now. I used to think of those type of secondary weaknesses but I must be letting my guard down. Thank you for waking me up even if it's a little it's better to start somewhere.
Was the lock still functional? Did it open?
+nks nks It opened with some effort, but couldn't be closed again. ☹️
nks nks 57
@james cowboy imagine the lock he's got to lock himself in then.
Hwackin' in ma tewl shed
@@lockpickinglawyer .sir please provide the buying link
Man that disk lock is a beast when dealing with Torque power
Those type locks are really good and strong,thats what I used on my locker thru high school until I graduated!!!! One of the best!!! That was 1979!!!
I love this channel, I wonder how many crooks have received a better education from this channel😂.
It's amazing to see that the stronger the lock, the weaker the next fail point becomes.
It’s even worse to find your stuff missing and the lock still intact 😂
Yep, and some insurance policies won't cover theft when the lock isn't cut or torched. My storage facility's policy is like that.
This points out the obvious: People often pay serious green for a "secure" hardened lock, then use a normal cheap hasp. Those things are mild steel, akin to a grade 2 bolt. The lock might be hard to cut, but offer no resistance to cheap Chinese bolt cutters or a $2 hack saw.
This man just robbing houses on the low, and getting money from documenting it on RUclips. Legend.
Nah, if he was a real criminal he'd be showing his face, his girlfried, his car, and his home in every video.
Cryptonymicus you know it’s a joke man
@@jakel.1724 and he was definitely, completely, 100% serious, I can verify.
Thanks to you I now spend 30+ minutes in the lock aisle at home depot. Yes I've searched your channel for the ones I wanted to buy before I did. Pretty sad for a birdcage lock lol
I really enjoy and appreciate this test, I have a similar disk lock on a storage container box. I intend to beef up the box with a bar and recessed lock where implements can not reach it.
Put the disk lock on a container and see if you can break the lock like that. Love your content mate.
Did you have to become a lawyer because you got caught lock picking?
Well yes but no.
He became a lockpicker cause he got caught being a lawyer!
Danny Flo His name is Saul.
@@HankHill757 Better call him!
Jimmy McGill
I use those on storage units. Basically you have to pick or destroy the door. Glad to see some validation of my choice. Only as secure as the hardware youre attached to
Mine storage with this lock was nearly broken into with crow bar they bent the metal so much I couldn't open the door when I removed the lock. Manybof the units near mine same thing. To me it looked like they could of gotten it ope. Of they pulled harder or had two people and two crow bars at once. But I don't think they got mine opne unless the facility pushed it closed. They are telling .e they didnt
In all fairness to the hasp, you have stressed that thing so much twisting all of those other locks that eventually it had to break at some point. Just a suggestion, but replace that hasp/gate lock and then give it another try with the same lock.
He uses a new hasp every test.
Yes, because everyone replaces a hasp each year or more often to make sure they aren't already stressed out. You aren't being very creative with your trolling if that's what your aiming for
Dosen't matter you can put a pipe on end of the wrench for unlimited amount of stress on the hasp and lock any way. It's a common thing to do with wrenches for bolts etc.
That’s not how metal fatigue works.
@@telanis9 You never bent a spoon out of shape, then back again, and notice how it will literally fall apart if you keep doing that? Magicians have
I was working for a fiber optics installation company. I ran the warehouse and did basic care on their fleet of vehicles. We had a man quit and he left locks on a bucket truck's tool bins. This had happened before and normally I took care of the problem with a pair of bolt cutters. However he had used Masterlock disc locks and with how they fit I couldn't get to the locks hasp to cut it. I broke the locks off with a hammer. It was harder than opening a normal padlock with a hammer and it totally destroyed the locks (often you can reuse a normal padlock after popping it with a hammer). I broke the hasps out the sides of the case. I didn't hurt the bins. On the other hand most Masterlocks are garbage, so other disc locks might have been much more of a challenge.
Bosnian Bill called... He says quit breaking into my sheds with twist attacks.
Wow, even gasping his voice sounds perfect ! Incredible !
This is the funny thing about locking things. Sometimes the thing you're locking on to is weaker.
I'm so happy you showing people how to break a locks to get in the steel people stuff
Additional testing required on the padlock rather than the hasp choice.
That thumbnail has me in stitches, seriously. "Here we see a wrench in its natural habitat, preying on its natural adversary, the common padlock..."
Let's go out to Jim Fowler in the field, and see if the guy with the wrench brains him.
Neighbours not knowing the LPL: Gosh! He lost the keys of his shed yet again 😂
Thanks for the information, love your short but well done videos. Good stuff.
This channel is great if your a thief you can learn so much :D
Brendin Cummings so true sir.
Is that why you're here?😂
It’s really nice that you have these informative videos on how to break in to peoples things😜
Now I can finally get into those Walmart storage containers in the back
Not sure about Walmart's but some containers have a shield around the lock making this attack harder than on an open hasp.
Don't for get the cameras...
I dig this guys style.. Shows people how to break into locked places then he can represent them when they go to court!!
Seeing that the hasp broke and the padlock was unharmed "doesn't give much confidence that a disc padlock will provide significant additional protection" is an odd conclusion.
For a door with a stronger hasp, he has no evidence that this disc lock is vulnerable to a twisting attack. Would need to test that first to draw any conclusions at all.
Exactly! I love LPL's stuff but this video really bothered me.
I looked up the word "professional" in a circa 1935 dictionary, and got a link to your channel. Amazing, simply amazing.
A rail spike puller would defeat most locking devices. Locks keep out lazy thieves and honest people
so would a crowbar and I suspect those are more common than rail spike pullers unless you been working on the railroad.
ROFLMFAO well now you've gone and done it. Nobody realized that the padlock is hardened but the things it goes through isn't.... now what? Lol love the work man
0:46 0:46 0:46 . Dat feeling when you finally get the lock open
Great...just bought one of those locks as added security for my storage unit...now I won't sleep a wink. Excellent teaching video clip though, I sure learned something different.
Something isWrong Here.
"Chinese Lock Did the Job"
Wooden Door and Cheap Hardware Did Not Matched.
Next Time Try to Do it On an Iron Door and Better Hardware . I'll recommended You to Use a Pipe-Tube on the Pipe-wrench handle for Bigger Lever.
Or Bring a Can of SPINACH.
So satisfying. I love it. That certainly butters my parsnip. A compilation video of these pls.
I've been waiting on this one wow great job
I’m not a regular to this channel, I just clicked on this video, but I LOVE it when people put huge locks on weak little hasps. Or even better, when the hinges of some doors can be taken off with a screw driver-ignoring the lock altogether.
LPL pulling bypasses like that is my favorite. When he's showing a cheap padlock and the video is barely 2 minutes, my first thought is "they didn't shield the keyway, he's gonna run a shim straight past the whole locking mechanism and just press the spot to open the shackle directly".
"we've broken the hasp" he just wrecked his door lmao
When LPL gets drunk: "To hell with these lockpicks! Wife, bring me wrench!"
I've watched several of your videos about failed locks. Do you have recommendations for locks to buy?
No The Lock Picking Lawyer doesn't make recomendations. He only shows people how he picks locks and points out design flaws in locks.
I have several Brinks Disc padlocks. One on my shed where I store my motorcycle, lawn mower, weed eater and leaf blower. and my tool box on wheels. I also keep my propane grill in the shed as well. I also made a motor powered dead bolt to secure the door to the other door I use large nails to secure the door to the floor and door frame.
Me, knowing nothing about what a "hasp" is:
"Oh he broke the hasp, interesting. Very good."
The hasp is what the lock locks into.
If only you had a computer and access to all of the world's knowledge so that you could just type a word in and have the definition pop up on your screen... too bad nothing like that exists.
@@hobbified You must be fun at parties
Torque always wins... Start thinking outside the box. Oh, love the video...short and to the point.
IF that Lock picking lawyer would just buy things with a key-fob, his life would be so much easier. I mean, he can never seem to find them darn keys.
Tha LPL is actually none other than the Hooded Claw. Run Penelope run !!
Should imagine that method will work with most padlocks!
Great channel!… I’m intrigued by what you can do!
What does it take to please this man?? I watched him twist apart 5 prior locks, one breaks his welded staple, "not significantly better protection" compared to what? Fastening your doors shut with 3 inch drywall screws? Great vids.
Excellent videos. Any padlock need to buried inside a steel shroud cover / steel box which provide protection against physical force and access and also makes it very much more difficult for professional pickers. Such a great channel.
Doesn’t tell me about the lock though.
I work in security and would like to know how this fares when locked on, let’s say, a sliding bar of a gate
I had one of those locks on a storage unit once. I brought my friend with to help me move some stuff. I misplaced the key and when I went to go look for it in my car, he had already opened that lock before i could walk the 15 feet to my car to look for the key.
I was in shock at how fast he got that open. It was just as fast as using a key. He said some of those disk locks are the easiest to pick and all he used was a blow dart with a bent tip.
Ill never use one of those again.
What type of serial killer just has blow darts laying around by his storage locker????
@@bfknapp Is this a stupid question or are you accusing me of being a serial killer?
I like this series
MR B
MR B
the thieves has subscribed to this channel, and they thank you for managing to break into houses because of you.
The wrench is more valuable than anything inside, you're not gonna walk away with a lawnmower
A mechanics tool set is 150 bucks or so, a cordless drill or impact driver is another 100 or so. 24 inch pipe wrench~ $25. Even taking these to a shady pawnshop would pay for the wrench 3 fold on the first use.
If you saw someone walking down the street pushing a mower, would you assume theft and stop them? If you don't spot them taking it from your shed and no one sees them doing any obvious lockbreaking shenanigans, all they have to do is act casual and they've already won. Thief skills are only about 10% breaking and picking. The other 90% is manipulating the expectations of the honest. You will never be as good at predicting criminal behavior as they are at predicting yours because you probably have an honest job, whereas their job is to spend all day every day coming up with ways to get away with stuff that isn't theirs.
Sweet now i can get into my neighbors shed. Thanks again!
Many years ago I was working on a building site.
When we came down from the scaffolding to get changed and go home, we found one of these circular padlocks on our lockup.
It took us nearly an hour to cut it off with a lump hammer and chisel! (the only tools readily available)
The incredible thing was, that nobody called the police!
There we were in the street (this was in London) taking it in turns with the hammer.
When we finally got in, we found that somebody had nicked half our tools.
Great vid. I was locked out of my storage unit , non payment of fees, and used
this method to get in and get my stuff. Great tip, thanks.
"Cadia broke before the guard did."
Rofl, such a niche reference for this channel.
Also,
-Hydra Dominatus
Was not expecting a Cadia reference in a LPL video but there it is.
"Grab his disc and twist it!"
First time I have heard him say "Hmph" while trying to open a lock - 00:46.
I've seen this type of locks on trailers. You should try the twist attack on something tougher then a backyard gate.
He’s not the lock spinning lawyer, he’s the lock picking lawyer.
We used to cut locks off unpaid units with large bolt cutters at public storage. These circular locks are the best for that application.
I’d like to see you have another go at it after installing a much stronger hasp. Very curious to see if that padlock will break.
You have the cleanest tools I've ever seen