I have a pitbike, My first one. I am unsure if it needs oil, The stick is only wet at the tip. Any pointers on what to get, Im running a 125cc lifan chinese 4stroke pitbike
No when you have put the oil an check it and it’s ready. You need too Seattle it and wait 10-15 minutes because after it can be lower because it’s Seattle in to the engine so put a little bit more oil in it 😉 and remember to warm it up before oil change your bike going to hold longer time
01:44 DO NOT REMOWE THIS SCREW. its the cam chain tensioner. im about to teardown the engine, to find the rubber tip of the tensioner that fell of. OMFG!!!!
Another one that cant get it right, DO NOT screw in the oil cap to get a reading, correct reading of oil level is with the bike standup straight, not on side stand and but resting the dipstick on top of the thread, dont screw it in to get a reading!!!
The thing I just want a plain answer too is when the bike comes in the crate do u run it at all with that oil in the engine or just drop it straight away I want to know if the oil they put in is the oil that should be used to run it in for a few rides or is it best to get rid of it n put some quality stuff in straight away answers please???
SHOP HERE 👇👇👇 🚚 Delivery to 32 EU Countries
minibikes.store/dirt-bikes/pit-bikes-110cc/
Please SUBSCRIBE to get latest videos about Mini Bikes
ruclips.net/channel/UCjmGnctv7sAks8Dx4cNB4hQ
Oil adetiv mos 2 ???
You also need to clean the bolt on the bottom of oil to avoid dirt sticking to it
I have a pitbike, My first one. I am unsure if it needs oil, The stick is only wet at the tip. Any pointers on what to get, Im running a 125cc lifan chinese 4stroke pitbike
No when you have put the oil an check it and it’s ready. You need too Seattle it and wait 10-15 minutes because after it can be lower because it’s Seattle in to the engine so put a little bit more oil in it 😉 and remember to warm it up before oil change your bike going to hold longer time
Cool
GooD
If the bike is not starting after you changed the ignition and the ignition coil may I or may I not need an oil change???
01:44 DO NOT REMOWE THIS SCREW. its the cam chain tensioner. im about to teardown the engine, to find the rubber tip of the tensioner that fell of. OMFG!!!!
La cât timp se face schimbul de ulei la motocros 125
Another one that cant get it right, DO NOT screw in the oil cap to get a reading, correct reading of oil level is with the bike standup straight, not on side stand and but resting the dipstick on top of the thread, dont screw it in to get a reading!!!
The thing I just want a plain answer too is when the bike comes in the crate do u run it at all with that oil in the engine or just drop it straight away I want to know if the oil they put in is the oil that should be used to run it in for a few rides or is it best to get rid of it n put some quality stuff in straight away answers please???
I ran my bike with it for about 5 hours and found no problems. Dropping it now.
Depends where u bought it I'd drop the factory oil first as it's usually trash and only there really for transport and break in
What would happen if you didnt clean that strainer?
Fully synthetic oil or no??
No
You should do a video on 50cc oil change
it is very simular on 50cc 4 stroke engines
850ml?
How much it 900ml not even a full bottle right
right
9/10ths lol