6-32 seems too course to be the correct size for the TTI COMBAT and RMR holes. Several things I have read said it should be M3. Is there a definitive answer as the correct screws to use for the TTI COMBAT with the RMR plate?
@@joshandmanuela the TTI Combat RMR is supposed to be 6/32. We contacted century arms and this is what we were told. Previously the Mete on the outer holes (didn’t meet the specs for true RMR footprint) were M3. We have had about 8-10 customers that were having issues getting 6/32 screws in the TTI. Could be a machining error, but the intent was to be 6/32.
I was trying to install the HS 507-C x2 to my Canik TTI with the included plates, but the screws will not seat properly. The screws seem to be to short because of the screw heads are rounded instead of being concaved resist screws. Am I doing something wrong or do I need a longer?
@@ericpryor9483 we have 6-32 x 11.3mm. Little bit longer for better thread engagement. www.calculatedkinetics.us/collections/gun-accessories/products/optic-hardware?variant=48387549135142
Hello, I installed it by using blue loctite screws without mo3 interface. It tightens very well and there is no movement after shooting. Do you think there is a problem? Thank you 🙏
@@muratgunova1901 we had a few people try this on the TP9 SC with an EPS or EPS Carry and because the mounting surface and the bottom of the optic is smooth, even with 2 screws it would get knocked off zero. Doesn’t take much to get them off zero. Are you just trying to co witness? If so we have sights we just put on our website today- www.calculatedkinetics.us/collections/sights/products/canik-mete-and-tti-optics-ready-stealth-iron-sights-by-night-fision
What threads are supposed to be used to mount a 507comp to the tti combat? The screws that came with mine wont engage the threads of the canik tti combat
@@HazardousRob you need to use 6-32 screws. We have some that are 11.3mm long and provides great engagement. We haven’t experienced any thread issues with the RMR screw holes but have had a handful of customers who have had problems with machining on the slides.
@@calculatedkinetics4026 i used the 6-32 screws like you said and they worked great, thank you. I used the m4 screws that came with the Canik because it said to do so and couldnt get any engagement.
@@simpleflipR6 as I replied preciously the optic manufacturers are responsible for making sure their aftermarket optic is able to mount to a multitude of hosts. In fact in this instance holosun did. They included screws that work perfectly, and even provide a 2nd set of screws that match.
I was trying to put an olight osight on my tti ?? But seems the screws are to short have u heard any problem with this an if so do yall sell any screws that would fit ?? I have used yall before bought a plate for my elite sc an still use it its great ...thanks for ur time!!
@@jordansuarez7556 it is a problem with that setup. The screws that they use have a custom head. We have some that are close but not the same head angle.
100% agree. It's so annoying. Even a small footprint if designed half decently would work just fine for a larger optic. 4 recoil lugs and 2 bolts should be more than enough even for a larger optic on a footprint that may be ~60% the size of the optic deck size.
I wonder if you can run an optic, and still use the iron sights?? Just in case the red dot does not work - would you still be able to use zhe iron sights while the red dot is attached? Thank you!
Yes you can definitely co witness depending on the optic you get. I bought the MeCanik MO3 which in my opinion is their attempt at an SRO. I'm barely able to cowitness with it but i don't plan on carrying it ever. I bought the Mete SFT so i put a light on ut and carry that instead! I actually traded in my TP9SF to make room for the TTI but them figured i would never probably even be able to see one in person for at least a year so i ordered the Pro... Then a week and a half later one of my local dealers called me on the way tho work saying they had one and i was first on their list! So within 2.5 weeks i purchased the pro and TTI! LoL oh well right 😂. Also i personally prefer the MO3 over the SRO and you can also find it you had for a half to a this
@@St.Louis_81 technically you could but if you ever bumped the optic, you could knock it off zero as you have 2 flat surfaces and no front and back bumpers to keep it centered. You need the recoil lugs from plate to gun and gun to optic to keep it straight and zeroed.
@@St.Louis_81 the EPS is the only option currently with the included sights on the gun. There is some new night fision sights coming out if you want to run the larger optics that will allow co witness.
Piece of junk can’t even get the mounting plate right. No 507C, 507K, vortex doesn’t fit on it. Yet manual says it does. I would take any of my SRO off knowing none of your screws work it’s not long enough. Who engineered this junk? CZ p10 competition, sig Icarus, zev hypercomp, zev long pistol, cz shadow 2 are all better choice than this in terms or quality and reliability build.
@@calculatedkinetics4026 I sent the trash back already something else is wrong with it. I have other pistols that I can use. My hypercomp and long zev shoots better. The cz s2 and p10 competition is better than this. Slow pistol. Made a mistake of bringing this to shoot along with my scheckmate and erebus 😂
@@calculatedkinetics4026your idea is actually better than Caniks engineers. You need w holes there or any other optic with the plastic lock in the back. Their adapters wouldn’t work on 3 optics. I’ve come across this problem before with CZ and other pieces that’s not easy to get
@@calculatedkinetics4026 Canik confirmed that the 507, 407, vortex optics does not fit because they only have screws provided that doesn’t fit so you have to buy a separate t10 screw and different length t20 just in case. If your gun wiggles it’s because you need rear studs flushed on there or the screws are not long enough. Too long night cause your gun to malfunction. Shadow system also had that problem the screws had to be of perfect length. .02 cents on your video if you sell the footprints. I will grind their adapters down and drill another hole to make it fit lol
@@simpleflipR6 what exact optic (407c, 407k, 507c, 507k, RMR, ETC) and what exact model of gun canik mete or TTI are you trying to run? We may have a plate for that so you don’t have to drill your gun.
![NLE Choppa - Or What ft. 41 (Orchestra Mix) [Official Music Video]](http://i.ytimg.com/vi/biOFASEgSOM/mqdefault.jpg)
6-32 seems too course to be the correct size for the TTI COMBAT and RMR holes. Several things I have read said it should be M3. Is there a definitive answer as the correct screws to use for the TTI COMBAT with the RMR plate?
@@joshandmanuela the TTI Combat RMR is supposed to be 6/32. We contacted century arms and this is what we were told. Previously the Mete on the outer holes (didn’t meet the specs for true RMR footprint) were M3. We have had about 8-10 customers that were having issues getting 6/32 screws in the TTI. Could be a machining error, but the intent was to be 6/32.
I was trying to install the HS 507-C x2 to my Canik TTI with the included plates, but the screws will not seat properly. The screws seem to be to short because of the screw heads are rounded instead of being concaved resist screws. Am I doing something wrong or do I need a longer?
@@ericpryor9483 we have 6-32 x 11.3mm. Little bit longer for better thread engagement.
www.calculatedkinetics.us/collections/gun-accessories/products/optic-hardware?variant=48387549135142
Hello, I installed it by using blue loctite screws without mo3 interface. It tightens very well and there is no movement after shooting. Do you think there is a problem? Thank you 🙏
@@muratgunova1901 we had a few people try this on the TP9 SC with an EPS or EPS Carry and because the mounting surface and the bottom of the optic is smooth, even with 2 screws it would get knocked off zero. Doesn’t take much to get them off zero. Are you just trying to co witness? If so we have sights we just put on our website today-
www.calculatedkinetics.us/collections/sights/products/canik-mete-and-tti-optics-ready-stealth-iron-sights-by-night-fision
Geez, i was really considering buying a optic/plate/screws from yall but I read your return policy and a 20% restocking fee to cover shipping?
@@marlboroman71818 that’s for an optic plate only. We’re not going to charge you 20% if it’s an optic, that’s way too high.
@@calculatedkinetics4026 Thank you for clarifying that
What threads are supposed to be used to mount a 507comp to the tti combat? The screws that came with mine wont engage the threads of the canik tti combat
@@HazardousRob you need to use 6-32 screws. We have some that are 11.3mm long and provides great engagement. We haven’t experienced any thread issues with the RMR screw holes but have had a handful of customers who have had problems with machining on the slides.
@@calculatedkinetics4026 i used the 6-32 screws like you said and they worked great, thank you. I used the m4 screws that came with the Canik because it said to do so and couldnt get any engagement.
@@HazardousRob they’re engineers aren’t so bright they didn’t think. That pistol doesn’t deserve a 500+ buck optic lol
@@HazardousRob the 507comp comes with screws that work perfectly with the canik rmr plate, I know because I just mounted one to mine.
@@simpleflipR6 as I replied preciously the optic manufacturers are responsible for making sure their aftermarket optic is able to mount to a multitude of hosts. In fact in this instance holosun did. They included screws that work perfectly, and even provide a 2nd set of screws that match.
I was trying to put an olight osight on my tti ?? But seems the screws are to short have u heard any problem with this an if so do yall sell any screws that would fit ?? I have used yall before bought a plate for my elite sc an still use it its great ...thanks for ur time!!
@@jordansuarez7556 it is a problem with that setup. The screws that they use have a custom head. We have some that are close but not the same head angle.
@@jordansuarez7556 and thanks for the order!
@calculatedkinetics4026 the screws yall have will they work tho?? If so I'll order them?
@@jordansuarez7556 yes! You want 6-32 x 11.3mm under our hardware selection.
@@jordansuarez7556 yes they work!
www.calculatedkinetics.us/collections/gun-accessories/products/optic-hardware?variant=48387549135142
I am disgusted with the vast footprint standards.
This industry should have elected to have two standards, SMALL and LARGE.
That’s it.
So stupid.
100% agree. It's so annoying. Even a small footprint if designed half decently would work just fine for a larger optic. 4 recoil lugs and 2 bolts should be more than enough even for a larger optic on a footprint that may be ~60% the size of the optic deck size.
If you use the MeCanik sight, you don't need to use a plate, and it co-witnesses.
Has anyone else had issues mounting the MO3 to the slide? My screws won’t seat.
I wonder if you can run an optic, and still use the iron sights??
Just in case the red dot does not work - would you still be able to use zhe iron sights while the red dot is attached?
Thank you!
Yes you can definitely co witness depending on the optic you get. I bought the MeCanik MO3 which in my opinion is their attempt at an SRO. I'm barely able to cowitness with it but i don't plan on carrying it ever. I bought the Mete SFT so i put a light on ut and carry that instead! I actually traded in my TP9SF to make room for the TTI but them figured i would never probably even be able to see one in person for at least a year so i ordered the Pro... Then a week and a half later one of my local dealers called me on the way tho work saying they had one and i was first on their list! So within 2.5 weeks i purchased the pro and TTI! LoL oh well right 😂. Also i personally prefer the MO3 over the SRO and you can also find it you had for a half to a this
@@danielbrunner7730 Thanks for the info
Am guessing you’re planning to carry and compete with it. You need the higher sights to do that
I want to know who makes those co-witness sites? 👀
Night Fision. These are prototypes, we are working with them to make them just a hair shorter for the best co witness.
@calculatedkinetics4026 thank you!! I'll br on the lookout for them!
Does the tti work with the 508t without a plate
@@St.Louis_81 technically you could but if you ever bumped the optic, you could knock it off zero as you have 2 flat surfaces and no front and back bumpers to keep it centered. You need the recoil lugs from plate to gun and gun to optic to keep it straight and zeroed.
@calculatedkinetics4026 what optic can I run that I'm able to co witness with
@@St.Louis_81 the EPS is the only option currently with the included sights on the gun. There is some new night fision sights coming out if you want to run the larger optics that will allow co witness.
@@calculatedkinetics4026 thx buddy
@@calculatedkinetics4026 will the 507 comp co witness?
Delta Point Pro for M&P?
In the lineup! Probably mid July sir.
Piece of junk can’t even get the mounting plate right. No 507C, 507K, vortex doesn’t fit on it. Yet manual says it does. I would take any of my SRO off knowing none of your screws work it’s not long enough. Who engineered this junk? CZ p10 competition, sig Icarus, zev hypercomp, zev long pistol, cz shadow 2 are all better choice than this in terms or quality and reliability build.
@@simpleflipR6 you sound frustrated. Shoot us an email so we can help you resolve this. calculatedkinetics@gmail.com
@@calculatedkinetics4026 I sent the trash back already something else is wrong with it. I have other pistols that I can use. My hypercomp and long zev shoots better. The cz s2 and p10 competition is better than this. Slow pistol. Made a mistake of bringing this to shoot along with my scheckmate and erebus 😂
@@calculatedkinetics4026your idea is actually better than Caniks engineers. You need w holes there or any other optic with the plastic lock in the back. Their adapters wouldn’t work on 3 optics. I’ve come across this problem before with CZ and other pieces that’s not easy to get
@@calculatedkinetics4026 Canik confirmed that the 507, 407, vortex optics does not fit because they only have screws provided that doesn’t fit so you have to buy a separate t10 screw and different length t20 just in case. If your gun wiggles it’s because you need rear studs flushed on there or the screws are not long enough. Too long night cause your gun to malfunction. Shadow system also had that problem the screws had to be of perfect length. .02 cents on your video if you sell the footprints. I will grind their adapters down and drill another hole to make it fit lol
@@simpleflipR6 what exact optic (407c, 407k, 507c, 507k, RMR, ETC) and what exact model of gun canik mete or TTI are you trying to run? We may have a plate for that so you don’t have to drill your gun.