Added to the list. lol. Just got the Highline front bumper for my 2020 TRD Pro and going with a Red winch as well. You guys have been shipping super fast so far with all my orders. Big thanks.
Tacoma Beast, you need to do a video on moving your rear shock lower mount so it doesn't hang below your axle housing and do a U-Bolt Flip kit! You don't want to catch anything like rocks and branches on them. It's a cheap and easy Mod.
Great video, question I have a durobumps u bolt flip kit on my 2017 Tacoma. Will this work as the spring plate is on top and has a hole for the. Urgent bumP stop. If this comes with a plate to just screw on top of the hole I would buy this right now. Thanks
This kit actually comes with everything you need! 😎If you have any more questions please feel free to reach out to our team support@tacomabeast.com we are ready to help!
I see many people going to these recently. Do they provide any benefit to other far less expensive bump stops, besides just being adjustable? They do look really cool though!
It's KILLING me watching him use a Wood chisel on steel. SMH! Primer is designed to stick to bare metal and paint is designed to stick to primer. NEVER use paint on bare metal without using primer first!
what was the point of drilling the rivets after grinding the heads off? Just punch them out with a punch and hammer. You already ground the head off that's what was holding it in there.
@@anthonymercuri1115 At the 5:00 mark the rivet was free spinning and was punched out. The drilling did not cause this. At the 5:10 mark he touched the step bit to the rivet and it fell out, he didnt even drill.
@@mattzamaites I saw the whole video, they did show a quick clip, but should have shown the completed product with the wheels on just to give the viewers a look at how it is. Still a good video that is pretty detailed.
That guy is a 10/10 when it comes to explaining and walking through an installation. Give this guy an install channel.
Added to the list. lol. Just got the Highline front bumper for my 2020 TRD Pro and going with a Red winch as well. You guys have been shipping super fast so far with all my orders. Big thanks.
Great video love the fact that you guys showed two diffrent ways to do it 👌
Does Locked Off-road have a strike plate for a U-Bolt flip kit?
Can you use this with a U-Bolt flip kit?
Think I would opt for a sumo spring setup .
Him: Preaches safety
Also him: Uses grinder without guard
Great install video. There you go again giving me something else to switch out from my truck. 🤦🏼♂️
Tacoma Beast, you need to do a video on moving your rear shock lower mount so it doesn't hang below your axle housing and do a U-Bolt Flip kit! You don't want to catch anything like rocks and branches on them. It's a cheap and easy Mod.
What do we torque the bolts on the bracket???
I'm extremely interested in this. My question is what is the lifespan of this bumpstop and what are the service options?
Spartan call them up or message them on Instagram they answer really fast. They’re fully rebuildable. I love mine
Great video, question I have a durobumps u bolt flip kit on my 2017 Tacoma. Will this work as the spring plate is on top and has a hole for the. Urgent bumP stop. If this comes with a plate to just screw on top of the hole I would buy this right now. Thanks
This kit actually comes with everything you need! 😎If you have any more questions please feel free to reach out to our team support@tacomabeast.com we are ready to help!
When you gonna do the year review on the eibach set up?
I see many people going to these recently. Do they provide any benefit to other far less expensive bump stops, besides just being adjustable? They do look really cool though!
They are much better, but not for everyone though. Do some research and see if this option is right for you. It was right for me so I went this route.
Only as strong as the frame. Thats not much! Save your money and go with Timbren.
@@rudedogii how would the timbrens be any better?
@@freethinkingamerican80 Not better just less expensive, no maintenance, and they do the same thing.
It's KILLING me watching him use a Wood chisel on steel. SMH! Primer is designed to stick to bare metal and paint is designed to stick to primer. NEVER use paint on bare metal without using primer first!
Shutup granpa
Where can I get just the mounting bracket?
I like option 2👍
what was the point of drilling the rivets after grinding the heads off? Just punch them out with a punch and hammer. You already ground the head off that's what was holding it in there.
Patrick Connor that doesn’t work you have to drill them out
@@anthonymercuri1115
I've hammered hundreds of rivets out on rusted out rear shackles and on bump stops living in the north east. It can be done.
@@anthonymercuri1115 At the 5:00 mark the rivet was free spinning and was punched out. The drilling did not cause this. At the 5:10 mark he touched the step bit to the rivet and it fell out, he didnt even drill.
@@anthonymercuri1115 he didn't need to drill them when he used the air hammer.... Big punch and big hammer has the same effect.
@@patrickconnor5143 I was wondering the same.
Wish these would work on my FJ Cruiser
Wandering Texan Use the Icon ones or the Light Racing ones made for FJ rear
Y’all need to google the definition of “Bolt on” cause this ain’t it😂
lmaooo
Close enough to bolt on once you remove stock bracket.
Awesome
REVIEW THESE BUMP STOPS!
I thought that was Kyle Rittenhouse for a second lol
😂😂😂
You forgot to show the final completed product lol
8 minutes
@@mattzamaites I saw the whole video, they did show a quick clip, but should have shown the completed product with the wheels on just to give the viewers a look at how it is. Still a good video that is pretty detailed.
Am I watching the Verge build a pc again?
Those rivets will rattle around in your frame and drive you crazy!!! LOL
It's not a boxed frame so they just fall to the floor.
@@twotwentyswift Ya i see that now at certain angles it looks like it was..My bad.
@@scottkailey1 I sure wish that was a factory option. Well that and a solid front axle, lol.
Toyota Arctic Trucks do not install Bump Stops. No Use for them, Just a Bling Bling item.
Man you must really love Toyota arctic trucks, you keep trying to promo them on our comments 😂😂😂😂
650 bucks and you didnt make it a flip kit....
Orw temecula
that poor frame
This install was not fun at all. Thank you tacoma beast for your lies
😂