Elegoo Saturn 3 Vs Saturn 3 Ultra - WATCH Before you Buy
HTML-код
- Опубликовано: 9 фев 2025
- Buy the Elegoo Saturn 3 Ultra here: shareasale.com...
Buy the Elegoo Saturn 3 Here: shareasale.com...
All Reviews
• Elegoo Saturn 3 Review...
• Elegoo Saturn 3 Ultra ...
• Elegoo Saturn 3 Vs Sat...
• Saturn 3 & Ultra Vs An...
Saturn 3 Playlist: • Elegoo Saturn 3
Are you looking to Pick up a Saturn 3 but want to know if the Ultra ios worth the Extra? Are you looking at the Ultra but hoping you can save some cash? Well great, that's the whole reason I made this video. So, um, I hope you enjoy watching it!
Saturn 3 12k Review: • Elegoo Saturn 3 Review...
Saturn 3 Ultra Review: • Elegoo Saturn 3 Ultra ...
Get any printer working easily with the Photonsters XP Range Finder - www.thingivers...
(watch my video for full instructions • How to Print Perfect M... )
Join this channel to get access to perks:
/ @fauxhammer
Buy WARGAMER - The best Resin for Miniatures yesthats3dprin...
3D Printer Cleaning Mat: geni.us/3DPrin...
This Video is part of our series looking for the Best 3D printer for Miniatures; www.fauxhammer...
Special thanks to the following Creators who provided models
Creature Caster - www.myminifact...
Tenjin Bust - BlackForgeGames (Patreon Only) - / blackforgegames
Dredge Marines - Mezgike - mezgike.com/co...
Wolverine - Drafnir Studios - cgtrader.sjv.i...
Artis Opus FauxHammer Essentials Set: store.artis-op...
FauxHammer Patreon - / fauxhammerblog
FauxHammer Facebook Group - / painthub
FauxHammer 3D Printing Group - / 3dprintedminiatures
FauxHammer Discord - / discord
Best Airbrush For Miniatures: www.fauxhammer...
Beginner Airbrush: www.fauxhammer...
Affiliate Links to support us.
Element Games - elementgames.c...
Wayland Games - affiliates.way...
Forbidden Planet: forbiddenplane...
Amazon - www.amazon.co....
Website: www.fauxhammer...
Facebook: / fauxhammerblog
Twitter: / fauxhammerblog
Instagram: / fauxhammerblog
Pinterest: www.pinterest....
Video Editing by VidPros: app.vidpros.io...
00:00 - Intro
Buy the Elegoo Saturn 3 Ultra here: shareasale.com/r.cfm?b=2351046&u=3060349&m=104244&urllink=&afftrack=
Buy the Elegoo Saturn 3 Here: shareasale.com/r.cfm?b=2351044&u=3060349&m=104244&urllink=&afftrack=
Get any printer working easily with the Photonsters XP Range Finder - www.thingiverse.com/thing:6023738
(watch my video for full instructions ruclips.net/video/Gm0-z971tgY/видео.html)
Join this channel to get access to perks:
ruclips.net/channel/UC_9Jsf3SP8aMJgn0xv5jHjAjoin
Buy WARGAMER - The best Resin for Miniatures yesthats3dprinted.com/pages/wargamer?ref=FauxHammer
You've answered all my questions about this printer!
I was actually going to get the Creality Mage S 14K printer, but after having to navigate for ages just to find the correct website and very little info about my more "newbie" questions I have changed my mind and will be getting the Elegoo Saturn 3 Ultra.
The only thing I now would love to see (if it doesn't already exist) is a highly detailed step by step guide/tutorial on everything you need to do and absolutely should do when unboxing your very first resin printer! Thanks for all your informative work, I'll continue researching to make sure I make the best choice for me and my printing needs!
VERY helpful video. Literally one of THE MOST comprehensive and straightforward printer comparison videos I've ever seen & I've been in this hobby for over half a decade now. Definitely earned my like & subscribe.
Just got my Saturn 3 Ultra, was on my third calibration print and a part failure on the print head caused the print to fail and damaged the ACF. One of the little black rubber plugs in the hex screws that connect the mount to the print head came off and got crushed into the ACF by the print head. Highly recommend removing these. Their only purpose seems to be to discourage the user from undoing these screws instead of the leveling screws.
There is no print head on the Saturn. Do you mean the build plate?
Yes, my bad.
Man had to ego check you 🤦🏻♂️ it’s obvious you meant the build plate no further explanation necessary mans just got a tiny pee pee and a big ego
I'm returning my saturn 3 and getting an ultra based on this video. Thanks for the info dump, it was really helpful!
so happy i sent my m5 back and bought the ultra!
bought an additional vat with normal fep too but before seeing your review on the ultra. now i keep it as an extra one and eager to test out what the printer is capable of!
You’ll be happier when I release my M5 Vs M5s video
Just bought the Saturn 3 ultra based on your reviews. Thanks ❤
I opted for the non Ultra version, which is $299 on Amazon, whereas the Ultra is still $480. For that extra $180, I didn't find the extras to be worth it for me. I'm looking forward to getting it in a few days and testing it out but I'm really grateful for your review!
I'm eyeing one rn lol had to convince my girl that this is my new fond hobby 😅
Let me know how is it. Buying a printer next paycheck, but still watching a bunch of videos before I bite the bullet
Acf replacement sheets are also $40 more than pfa on Amazon, so price gap is really more like $220
Thanks!
Good to know that the vats are compatible between these printers because the release films not only have different qualities, they are different sizes & prices. I plan to buy an Ultra soon & want to purchase the PFA based vat as a spare/alternative.
Incredible review. Thank you so much! I've been wanting an Ultra for a while - I just don't have room to place it and a wash+cure station yet.
Just ordered my Ultra today with a $10 off coupon - this will be a nice upgrade from my orginal Saturn - thanks for the great comparison!!
$100 for a better buld plate fixture, ball screw, capacitive touchscreen and wireless file transfer seems like a great deal.
Thanks for this comparison. I'm replacing a Saturn S with a dead screen that is glued in place and wish to upgrade. The Ultra seems like a natural progression for a reasonable price.
I must say that I’ve been thinking a lot about which one to choose, this video helped me to decide, so thanks for doing the comparison 👍🏻🔥
Oooh which one and why?
I value detail, reliability, and build size for my printers. There are a lot of projects I want to do right now, but sadly don't own a big printer.
I would buy the Saturn 3 Ultra, but cannot justify purchasing it, nor do I have room for it. So I'm stuck with a Mars 2 Pro for the time being. I have loved my time with the Mars 2 Pro, but man, I cannot seem to get rid of egregious voxel lines on that mofo.
Based on this comparison video I choose the Ultra, thank you for such an indepth video!
I've been looking into getting into Resin printing for some time now. I am in the middle of building a Voron and want a resin printer to compliment it. You've made a comprehensive video for me to choose the Ultra to be my first Resin printer. Thank you.
How are you finding the Saturn 3 ? I am also thinking about taking the plunge and getting the Saturn 3 as my first printer
My Ultra literally just arrived this morning, so I'm delighted! Shall be interested to see how my ACF compares to yours with the Dredge prints as I have the STLs myself
If you wanna do them at 75mm, just scale the parts up 234%
How did it turn out
I found a Saturn 3 ultra available in good price. Thank you for the reviews. I almost got m5s but changed my mind and insisted on looking for the Saturn. It will take a couple months but I think it will be worth it and a great upgrade for my mono X. Thanks again, Ross
Glad I could help - and good call!
Hail Reaper! Just saw you were listening to morning star in the background!
Hail Libertas! Good spot!
We bought the ultra on presale. So far it has been a great printer. We wanted a larger printer but I liked that this printer has a Linux os and premium features.
Yeah it really hits a sweet spot
I did not know about the Linux OS, I believe the Creality Halot range uses Linux (at least the first Halot did).
Thanks for another great review. I am going to be getting rid of the original Mars and Saturn printers for a Saturn 3 Ultra. Thanks for all of the time you spend giving real world examples and solutions to possible issues.
Good choice! i am happy to help
I got the ultra and did exactly as he said having 2 print beds with different films. Using my ACF film for printing miniatures of dnd and such with lower speed settings. While using the print beds with PFA film for terrain and such where I’m not as concerned with quality for higher print speed.
I bought the Saturn 3 Ultra 12k based on your review👍🏻
Hope you enjoy it!
I’m actually just watching this video because I think your content it great. I have and love my Uniformation GKtwo.
Thanks so much for helping out
New at this channel. Thank you so much for these amazing reviews.
Do you consider the 3 ultra is still wort it right now in 2025? The 4 and 4 ultra are beyond my budget.
I aim to print action/anime figures.
I managed to spend some 4-5 hours reviewing 50% of your videos about 3D resin printers because I need to make up my mind and get my hands on one. After some ups and downs in each model, I believe I will choose the Saturn 3 Ultra for its accuracy. I will replace the ACF with PFA to get better details as you last hinted out. Thanks for your videos as I appreciate your efforts made to clarify our minds. I was about to get the Anycubic Mono M5S for the budget, but then after your review, I changed my mind in favor of Elegoo Saturn 3 Ultra. I hope my choice is worth this decision.
Good decision, I completely agree with your deduction, however, please consider the Saturn 4 for a similar price. My saturn 4 review is not our yet. but like the saturn 3 differences it;s basically the ultra with a much sippler UI.
I am not sure if this is still a thing but as I bought my Anycubic Photon Mono it was said that the lifespan of the lightsource would be around 2,000 hours. But Fresnel-lenses have a lifespan of 20,000 hours. For me this was always one of the main arguments for the Elegoo Saturn. I don`t know if is still a thing because nowadays I can`t find any information about the lifespan of the LCDs but for me it is still the best argument against the Anycubic M5s.
Maybe I am mixing things up with the LCD screen.
That's a mix up. So LCDs will havecablifespannif 2,000 hours. DLPprinters last 20,000 hours
Hello, I'm new to printing and have loads of questions. 1) What is the air filters for? 2) Do you fill the tank to print, and if so, how do you keep it off the build plate, or does it pump resin in automatically to maintain a certain level? 3) Will the printer stop / pause if it runs low on resin? Any information would be helpful.
Thanks for your work here!
I will do an upgrade. My old Photon Mono (2k) has to go. (Bye bye voxels).The print quality seems to be identical between 3 and Ultra. I think I‘ll go with the 3 because I don‘t care about wifi and speed.
It's a little better on the Saturn 2 out if the box. Good call
The 3 non Ultra will get you along nicely as the print quality is comparable. Let‘s be honest (i can only speak for myself), nobody can tell you what ist coming around the corner in maybe 2 years. Then the upgrading-game starts all over again. Just don‘t go crazy about it.
I can’t paint fast enough to make speed worth it. Even on mass produced models.
Same
I agree, speed really isnt an issue for me on resin printing.
Fdm printers on the other hand greatly benefit from speed
I have the 3 sitting in my print closet right now. At the speed I am painting miniatures, print speed is of absolutely no concern. The other differences are also not really important to me. The air filters seem unimportant as the main problem I have with fumes is coming when washing the prints in alcohol.
I hear you. If you’re happy with the 3 then that is the best for you. And you saved $100
@@FauxHammer Well the 100 just turned into more resin 😅
Penso eu que a velocidade influencia sim no seu bolso. Pois se ela imprime mais veloz, teoricamente teria mais impressões devido a vida útil do LCD
Amazing video. I really wanted to use your affiliated link to purchase mine - but since I'm in the EU, once I changed the location, it seems that reference link was lost since I was redirected to another website and had to choose the product again. So maybe in the future have two separate links, one for US and the other for EU?
Which link did you click? they should all work? onl;y reason you are directed to a different site is VON stuff
New to this but about to buy.
Is it possible to print in black?
Going to be very interesting when you do change to a new ACF sheet.
Yeah, I'm genuinely scared. I've seen reports from people echoing my results and some others saying they have lines. I suppose it's good to know that you can just replace ACF with NFEP.
11:05 the one on the right looks significantly better to me. I have a roll of nfep from mcmaster carr, I may just buy a 2nd vat and test it out. Of course I still have to finish the video and then watch your other video about ACF, but that point in time I reference is a huge win for nfep to me. I may come back and edit this after the videos.
Thanks for the information!Which one is the best just for jewelry with high quality?
And do i need to swap the PFA?
Both are the same when you swap to PFA
I will take the ultra, because I can take as you said a spare, I will buy it now, thanks
Instant like. I really appreciate your content!
Thanks so much
I got a package with the ultra and the Mercury X wash and cure station for $620. Even if I don't use all the features I'll use the wireless and I'm willing to pay extra for the metal over the plastic.
Great video! When will the Wargamer resin be available in the US?
Sorry we are working on this. Trying to do it ASAP
I got the saturn 3 non ultra, happy with my choice. Only thing i wish i had was wifi, usb stick is a minor pita. My bed stays perfectly level with the ball screw. I can print so fast i could nwver hope to keep up with painting my minis. Also acf costs 3-4x more than pfa, so factor that into price gap since it will inevitably need to be changed
Acf is super fast!! I ues ultra for 1 month. And now lift 2/1mm lift speed 500/2000 mm/m .especially Hardsurface model printing is really good quality and fast. Acf also reduces the Effects of Vacuum.
I’m not sure you can get 500mm/m out of either? I know that 600mm/m was no faster than 400mm/m when I set it…
thanks for your videos! I am planning to buy one elegoo printer, but after seeing your mars 4 utltra and this video, I do not know if keep my choice or buy the saturn 3 ultra. I need the better detail possible, what do you suggest? In other reviews you did, I think you try to mention that the saturn 3 ultra is better than the mars 4 ultra. Thanks for your attention.
Thanks for this review. I currently have a Saturn 2 8K and have been satisfied with it but would be nice to have even better quality prints. Is it worth upgrading to the Ultra 3 at this point? I know there's always something new waiting around the corner so it has me wondering if I should wait. Btwn this and the Anycubic M5, do you favor one over the other? I'll watch your video on that next.
I've been thinking about getting into 3D printing my own dragon figures for a while now, but I'm still confused on what I should be looking for in a printer, I don't really want tiny tiny prints more or less 1/12th to 1/8th scale figures. I'm still really new to this and haven't bought a printer before, I'm not gonna be getting the printer for a while and I'll definitely wait until the dragons are modeled, but should I go with the ultra? Or wait until the saturn 4 comes out?
A great review and thank you!
Thanks so much
Have you tried with a different ACF from Elegoo yet, or are you still using the same one? Interested if it was truly just luck or what
I never did, but I’ve seen enough comments saying they had the lines and others saying they didn’t that I have inferred it was luck
I know I am a bit late to this video, but do you think the rectangular pixels in the printers have anything to do with the better quality you are seeing from the acf
Nope, none at all. I have tested several printers with this same screen and they all expose differently
Hello, I still have doubts about which model to buy. In my case the priority is the quality of the print rather than the speed, it would be to print small pieces of jewelry. Which of the two models do you recommend?
Does that actually work correctly, change the ACF for a PFA sheet on the vat?
I am thinking about buying my first 3d printer, so I am completely new.
I didn't know that the sheets were separated from the vat, I thought it was all one unit.
Can you then buy an extra vat and have both, working with the same settings, or do you have to adjust it?
I really do not care much about speed, but I like all the other features of the saturn 3 ultra, so I was thinking about just getting the clear PFA, if that gives me the same quality as the saturn 3 12k.
yeah it works. and yeah the Release film is a consumable, you will need to change them semi-frequently. A lot of people do buy the extra vat and have one for fast prints and one for detailed prints. but you need to relevel each time.
@@FauxHammer Fantastic to know. I thought that maybe the light collimation or something was different to take into account the frosty effect, and that would render the other type irrelevant.
I think I have made up my mind and I will expend the extra cash for the saturn 3 ultra, since it seems to be both more flexible and has more future proof features.
any update on the ACF? can you just change it and let us know? or change it on a different vat so we can see if you were lucky or if the ACF from Elegoo is actually working
Got one of these ultras coming for Christmas! .can u guys recommend both a best resin and affordable /budget resin for printing miniatures? This will be my first resin printer also do I need curing and rinsing equipment ?
I have my own resin Wargamer, Links in the description.
I haven't tested enough resins to confirm the best among all of them, so I made my own
is that linked resin in the description the one with the crazy flex at 14:47? @@FauxHammer
I'm literally about to pull the trigger on the ultra with your link. Thanks for all the hard work with these reviews. I'm excited to upgrade from an OG anycubic photon with a 2k display
man, those Dredge models, im blown away every time i see them. Thank you again for another Vs review, i really need to get off my rear and raise some funds, anyone have any advice for selling 40k bits? ive got LOADS, and have been tempted to either sell just, one Giant tub, or divide into gallon bags or...i dont even know
So would it be worthwhile upgrading to the Saturn 3 Ultra if you were considering buying the Mars 4 Ultra?
There is no Fresnel lens and the light doesn't get collimated in the Ultra.
Without Fresnel lens, prints near screen edges will expand slightly (little to no difference near the center) but unnoticeable in most case.
They probably meant "Reflective" light source since they used a mirror to reduce light spread but would still be better if they put Fresnel lens too.
Well the prints are no t noticeable different from it, so whatever they did works.
I’ve learned more about the collimating source and it seems more evenly spread.
Almost like a blank DLP projector in a way.
Good review, just a pity that Elegoo customer service was so poor.
ACF the size of the peeks and valleys are critical, and the design to get the proper texture is going to very from manufacture to manufacture. Also lot to lot may have been run on a difrent machine or tooling, not sure how much quality control is looking at when a new tool is commissioned into a machine! So looking for a quality ACF provider will be difficult!
Final question and thank you for responding to the others I've had over the last few days. Decided this is the one for me and am curious about resin. Do I need the rapid resin for this to work faster or does it deliver faster speed regardless of which resin you choose? I'd like to use plant based for smell purposes but I might not have to since this has the filters built in. What would you choose?
Well that’s the million dollar question. Which resin?!
Well….
No, this won’t print faster regardless. You will need to understand how these work to know what makes a faster print. Things like layer height abd lift speed are the main ones. Fast resins sometimes means faster curing, sometimes it means faster lift speed, sometimes both. Sometimes neither and the brand just wanted to call it “fast”. You’d be best speaking to people in a community group for resin advice
Plant based is typically crap to work with and causes more issues as it can be finicky. Just like most water wash Ames
Cheap resins can stink a bit more. But so can some expensive ones. but the carbon filters deal with most smells from smelly resins.
So sorry. Welcome to “what is the best resin for me?”
You’ll need to ask around and play with some yourself. It’s why I wanted my own so at least then I know what it does and I can recommend it around
Do you plan to change or use a different ACF to test your theory? I got screwed over by Elegoo on the original Sat and returned an S2 for poor print quality but this one (Ultra) really has my interest.
One more question - I'm curious about your resin. Any plans for a flesh tone or US distribution?
I’ll only change it when it needs changing. But I have asked Elegoo directly, what the difference is.
As fir resin. No plans to do any other colours, but we are looking to bring it to the US asap
Did Elegoo get back to you?@@FauxHammer
I have been thinking about getting one of these since I first saw the spec sheets on them. Most of what I will probably print will not need to be super detailed but what I am interested in is the GOO format being open source and the Ultra having a linux motherboard. I know the GOO format is not perfect yet but i'm sure that will improve with time and my hope is that this will make it's way into something like PrusaSlicer so I don't have to deal with Chitubox licensing.
I print mostly large scale, presupported models from Wicked and Nom Nom studios, would you recommend this or the gktwo?
in terms of print quality, it probably doesn't matter, go with the feature you want
Hi, thanks for the great review! I have a question: when you compare both printers with the FEP screens installed in each, the Saturn 3 seems to have more fine lines on the bottom of the test print, while the Ultra seems to have more print depth (hence perhaps higher contrast?), is that an accurate observation? Which of the two would you give the crown purely in terms of better contrast and resolution printing with fep screens?
Those line sare so thin that once I put these tests through a cleaner, sometimes they tear off sometimes they are ok, usually if I've left it in a bit long or if other parts knock into them mid clean. Don't read too much into it, but I understand I''ve not shown it as best as I could have
With FEP, there's no discernible difference
So far my decision was the M5S just for the autoleveling... considering the same specs on the screen and just quality print... now i don´t know which one... a tip?
Ultra, Easily. I have a comparison video coming out. I don;t like to persuade people in reviews as I prefer they make their own mind up as tto what is best for thgem. But the spec alone and the print quality and build quality along with actually useful features is so much more on the Ultra vs the M5s it;s an easy win
@@FauxHammer Thanks for the tip!
Greetings from Chile
To add another point, autolevelling is a complete gimmick anyway in my opinion - it takes maybe 20 minutes max to level a resin printer if it's your first time doing it, and once you set it correctly you don't need to level it again unless you really knock the build plate somehow. Plus, it's more parts that can go wrong on the printer, which is never a good thing!
@@NikkiAnnMarie I agree the autoleveling is of only initial benefit. The ques for me in terms of long term usefulness, is the failure detection capability. That could really add up over time.
@@AutoPhoenix-r8q Yeah I agree - force detection IS really useful, but its implementation is poor by Anycubic imo. The Athena sensor is really leading the way with that technology.
I planned to buy Saturn 3 Ultra this morning after your previous video, and then I saw this video incoming. I will wait until it is published but I wonder if you are still ok with its ACF?
I am ok with this ACF but I'm still saying that trioeciously becasue I have seen others report similar results to all other ACF films. I;ve trioed this resin with ACF on another printer and All I can assume here is that I got lucky. Elegoo have confirmed that the same ACF was used in the Mars 4 and Saturn 3
My mistake was buying a fast printer for my 1st one. I was so use to 10 minute Cones of Calibration that when I switched to a different resin I couldn't believe it was going to take over an hour each to dial it in. 🤦♂
I can't find any videos or reviews anywhere specifically comparing the different light source technologies. The printers with the COB collimating fresnel lenses and the refractive setups seem to infer they are better than the matrix arrays. This would also be indicated by the fact that they switch to it on the "Ultra" or premium printers. But most printers, including the consistent #1 favorite on just about anyone's top ten list, the GK Two, use the matrix panels. Is there really a difference? In quality or lifespan? Can this be measured? I would really like some in depth investigation of this. Thx.
This is my first experience with Collimating, and when I did this and the review video, I didn't fully understand what it was. I'm still trying to understand the technology, but this video will show you the result difference.
@FauxHammer from your last Saturn 3 demo, does the ultra address the 4Gb file size issue and truncated file issues and failed prints? TIA
No. and I'm about to talk about this on my Saturn 4 review.
@@FauxHammermany thanks, look forward to seeing it
Where can i find a PFA screen for the Saturn 3 Ultra?
Or does a PFA film for the Saturn work on the Saturn 3 Ultra?
i've got a mars 3 and love it , just the issue that some armor models don't fit on the plate unless you put them in some real cirque de solei poses , so thinking of upgrading to a saturn 3
Now after 4 years printing with resin, I discover there are 3 films: ACF, PFA and FEP. ACF is on the ultra models, interesting.
Yeah ACF is unloved and the new ultra killed it.
Just to confuse you more , some companies call PFA “NFEP” And Creality call their SCF film Picta or somma stupid. Because they know if they say act, people will hate it.
for me the 4-point mount is worth getting it over the ball mount.
How fast has you pushed your Saturn 3 ultra in term of printing speed with the ACF film and normal resin? Is it faster than the normal Saturn 3?
Well, the resin itself could be your bottleneck. So as I explained. If however fast your “normal” resin prints. Add 30%
If you are able to max out the speed of your current printer with that “normal” resin. Then you may be able to get much more with a Saturn 3 ultra.
The Saturn 3 ultra itself is more than twice as fast as the Saturn 3z
But that doesn’t mean all resins will print that fast.
Ultra wins hands down ✋😎🤚
#SpoilerAlert
I thought that when you level the build plate you do it WITHOUT the vat in place?
You are meant to based on the guides. But considering the point of the paper is to simulate the gap of the release film. Why not just use the release film.
This works.
I need ur help guys. I wanna to buy my first 3d printer. Should i buy the 3 ultra or 3 12k?
Whichever you can afford, one is better than the other but is WiFi worth the extra hundred to you?
So if i understand correct if i dont care about wifi or metal case on the printer i can buy the Saturn 3 and use acf to have quick prints right?
pretty much yeah. the Z-rail onthe ultra is a bit smoother due to the Lead screw,
i'm looking to buy the ultra for jewellery business soon
nice!
So, was your AFC screen a fluke, or is the Ultra AFC legit?
So Elegoo Saturn 3 Ultra or Uniformation GKTwo? Where does this rank on your list? What printer do you recommend for someone starting out, one of these or a different one? Thanks.
www.fauxhammer.com/top-10/the-best-3d-printer-for-miniatures-models/
Any printer is a good beginner printer, the more expensive ones are often Easier. but I think the Mars 4 Max is a decent enough starting model. unless you can get a cheap Saturn 2
Anyone put a regular PFA in the Ultra to get rid of the soft edged prints? How would it effect the reain settings and timings?
I think it will be the ultra just because leveling system and the ballbar screw... Du you test how much influence has room temperature on the print?
When you compared the exposure test with pfa films at 10:55 the non ultra looks like it printed negligibly sharper. I thought that with the same films results would be same. Any ideas what could have caused that?
Sorry if it sounds like a noob questions but everything I know about resin printer is from watching your videos, still deciding whether to get the Saturn 3 ultra as my first printer
no, good question and I should ahve explained better. those raised lines are so fine that sometimes they come off when cleaning the print, sometimes not. they are close enough that I'd say this is the same result.
and yes, you should get teh Saturn 3 Ultra. It;s an amazing printer!
@@FauxHammer ah I see, that makes sense
to be honest a 'negligable' difference isn't something I'd worry about - it might not be repeatable. It could be a variety of things, Resin, Resin Temperatures, Wear on the machine, was the machine 'pre warmed' up with a print beforehand, etc. Until you can get a significant difference in detail - I just don't see the point in focusing on something so marginally small that it isn't even a +/- 5% difference on scales.
Strange that in the 4 model shootout with the AnyCubics, The Saturn 3 came out ahead of the Ultra.
Hello! I'm making reconstitutions of insects for museums and i'm wondering whether I should update my old sonic 4k for the phrozen sonic 8k (upgraded to the 12 k version?), the phrozen mighty 8k, which offers almost the same resolution with a larger print volume (some insects are tiny but some reach 20 cm) or the Elegoo Saturn 3 / 3 Ultra? For larger builds I own the SOnic Mega 8k.
COuld you share your thoughts? Thank you.
BTW, great videos with great objectivity in your advices or opinion.
Thanks a ton. I don’t see the value difference between the Mighty 8k with 12k upgrade. And the Saturn 3, yet print results look the same
Great. So moneywise, Saturn 3 or 3 Ultra is a better choice.
Thank you!
@@marchermitteSaturn 3 Ultra is my pick, but replace the ACF film with PFA
Thank you, I've seen you video on the AC film, I'll follow your advice.
About the leveling plate, in the ultra does it already come with a four screw system or is it available as replacement?
it comes as standard
Perfect!
Thank you, really!
Saturn3 12k or anycubic mono x 6k s? 👀
Saturn 3, This is an easy one. I honestly don't understand why the x 6k S was compared to it. But if you have a reason, please fill me in so I can offer better advice.
@@FauxHammer thanks! I was deciding between both.., in my country I found them at the same price 😅
at 7:28 you explain the ACF film, so, is normal in the film to be frosted?, because I just got my saturn 3 ultra and in the first test, the film past from clear to frosty, and I was scared it could be a disaster, was my fault, and maybe I need to return my printer.
It turned from clear to frosty? Please tell me you took the protective layer off?
Sorry, I’ve no other idea how that could happen?
@@FauxHammer yes I did, double check before I use, that is not supposed to happen?
@@Abraham-x6n it’s not suppose to turn from clear to frosty no. It should be frosty when you get it. After printing you will see some scars on the film, but the film itself must always be frosty somewhat
@@FauxHammer that's weird, looking at it there's no sign of damage, the surface of the film is evenly frost, the screen is ok, everything looks good.
@@FauxHammer Im going to do a second test, just to make sure.
Are you curing your prints?
13:28
THIS. EVERYTHING ELSE IS SUBJECTIVE BUT THE SECOND USB IS A PROPHECY!
We will see heaters in the future. Yes, right now they would cause artifacts with their constant on and off but THATS THE ONLY PROBLEM to rectify. I will even build my own if I have too.
Still really confused in witch printer to buy ngl I'm going from a fdm printer to resin and trying to make a smart choice was looking at the Saturn 3 but there like £100 difference between that an the ultra and honestly cannot make a choice even watching this video looked at most of elegoos printers and still feel clueless, I'll mainly be using it as I do Warhammer for mods and terrain peaces for my wargaming hobby if you could help alittle more to help that'll be great thanks
Saturn 4 ultra is now the best choice…
Saturn 4 and 3 normal are better if you want to save some money, but you loose some features too
Oh, man. This is exciting!
Hope you enjoyed it
Hi, just out of curiosity, can the 3 ultra platter be mounted on the 3?
it can't no. they are different mechanisms
so i can be wrong here but i thnk the difference is , ACF has a shinny side and a fogged side, the fogged side is supposed to face down towards the lcd
You are completely correct here.
Hi ! I havn’t seen the video but I have to decide quickly if I cancel my saturn 3 order for an ultra. I intend to only use FEP and I would not use Wifi. I care about print quality, not much print speed. What would you suggest ? Thanks
There's no huge difference in print qualitty between them, they are pretty much the same printer.
@@FauxHammer I didn't know if the new source light have an influence on quality, so thank you very much for your answer :)
I'm actually just scared as with the m5 and m5s the m5 is the one I should have gone for as now the m5s auto bed levelling is malfunctioning on everyone's and we're "supposed to be getting these v2 build plates" believe it when I see mine! It's all ongoing there's a massive queue before me the technicians have to get through.
The fact the same thing here with elegoo but honestly I really can't see there being an issue with the ultra they done the right thing.and stuck with manual bed levelling! Tbh I actually miss having this on m5s you feel more in control and your able to easily fix it! I absolutely love my saturn 2 8k it's just such a pleasure to work with and it just works! Once dialed in correctly you can throw anything through it and you know it'll just print it no problem!
next weeks video is M5's Vs Saturn 3's. will be up tomorrow for members.
I'm trying to get an idea what's a good starter machine for resin printing. I started with an Ender 3v2, then a few weeks ago I bought a Bambu Lab P1S because I wanted a bigger build volume. I now think I have my larger part basis covered, and now think resin is the next logical step. What's a good starter printer for resin?
Depends what youc an afforde, since you donve in with a P1S, it sounds like you have some money available
Saturn 3 Ultra or the Uniformation GKTWO are the top picks for me.
But you could also go with something more basic, llike a Staurn 2 or Saturn 8k?
i have vids on themnall and a summary video of all options coming soon.
@FauxHammer thank you, I appreciate you taking the time and providing your input
Can you put the Ultra build plate in a regular Saturn 3?
unfortunately not
You lost me when you're talking about swapping the ACF film for a PFA sheet... WHAT the heck does that all mean and how does it work? Thank you :-)
This will make more sense when watching the individual reviews
Would a build plate from Sat 3 Ultra fit Sat 3? If the two-point leveling system on Sat 3 is an issue.. a purchase of four-point build plate from sat 3 ultra could me a solution, am I right?