80 Chevy Silverado Front Axle Disassembly Dana 44
HTML-код
- Опубликовано: 13 сен 2024
- Getting the Dana 44 from the 80 Chevy Silverado disassembled.
Donate to Help me create content: www.paypal.com...
Things that might help with a project like this:
Spindle Nut Socket: amzn.to/3TVxmRm
Small Torch: amzn.to/3ZmewDR
1 1/8" Socket: amzn.to/40ByE64
Seal Puller: amzn.to/42H9JQg
Ball Joint Press: amzn.to/42IgPUW
Universal Joint Sockets: amzn.to/3ZWsZHQ
Skyjacker Lift Kit: amzn.to/3YYqvaH
POR15: amzn.to/3ZzYmYD
Paint Gun: amzn.to/3YwQUMr
Pressure Blaster: amzn.to/41Qz7D0
AirCat Grinder: amzn.to/3IOP185
Blasting Cabinet: amzn.to/3mckf1m
Blasting Cabinet Dust Collector: amzn.to/3ZqjmR6
This video contains affiliate links, which means that if you click on one of the product links and buy, I'll receive a small commission.
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/r...
License code: 8YOOEELQ1SABC9HW
Donate to Help me create content: www.paypal.com/donate/?hosted_button_id=HEEM93RHSHE92
Things that might help with a project like this:
Spindle Nut Socket: amzn.to/3TVxmRm
Small Torch: amzn.to/3ZmewDR
1 1/8" Socket: amzn.to/40ByE64
Seal Puller: amzn.to/42H9JQg
Ball Joint Press: amzn.to/42IgPUW
Universal Joint Sockets: amzn.to/3ZWsZHQ
Skyjacker Lift Kit: amzn.to/3YYqvaH
POR15: amzn.to/3ZzYmYD
Paint Gun: amzn.to/3YwQUMr
Pressure Blaster: amzn.to/41Qz7D0
AirCat Grinder: amzn.to/3IOP185
Blasting Cabinet: amzn.to/3mckf1m
Blasting Cabinet Dust Collector: amzn.to/3ZqjmR6
This video contains affiliate links, which means that if you click on one of the product links and buy, I'll receive a small commission.
Awesome! Thanks for longer videos!
Glad you like them!
It definitely has had some hard use. Rockauto has the vent piece you need.
Maybe some rock crawling in Colorado. I actually tapped that vent hole for 1/8" pipe thread and have a fitting to go in it.
What size spindle socket is that for the hubs
Can you post the part numbers for seals and bearings? Currently rebuilding the same axle but I can’t find the spindle bearing and that seal behind the spindle besides a kit of all 3 for a couple hundred bucks
I believe I have part numbers in the assembly video for most parts. I don't have them written down anywhere.
I came to see how the outer seals go in, you didn't show any of that.
I don't know what outer seals you are talking about. Why would I put a seal in on a disassembly video???
They go in the way they come out
What did you do about the vent hole? Just put a dana 44 in an I have no vent tube coming out of the housing as well.
Check out my assembly video. I show the vent and what I did for a nipple.
Vent tube is wide open taking in water.
Figured that out.
@@mossman381 Yeah sorry, commented before I watched the whole video.
@@NDB390 That's ok
Sticking with the 3.07's?
Yes, should make a good cruiser. The big block should have good low end torque to help.