Absolutely been with you that long Jesse no boost Johnny send it miss the shenanigans more Jessie no boost Johnny send it and the scrap truck still loving the new content🇺🇲🇨🇦🇨🇦
The 08 has been run the hardest and run through the most nastiest conditions yet the damn truck is immaculate and absolutely beautiful still. Amazing what some TLC does for a vehicle.
This was a super helpful video. Putting in the street dual disc in my truck tomorrow and hearing that you would recommend it makes me feel so much better about that decision.
Last time I remember Greg a changing the clutch in the 08 was back in NJ in the driveway on the ramps. That looks much easier this time ! Glad to see the 08 getting some love 😬
Been here since then and several years later watched it again when I put a southbend double in my all black 08 dually, I clearly hated your taste in pickups😂😂
Good job with clutch swap Recommend using guide studs for removing and installing. Also I use wd40 in my anti seize and also it’s not recommended to use it on wheel studs for reason being if the nuts should come loose you will never know until you feel loose. I have been turning wrenches on tractor trailers for 30 plus years and when I was in my early years a Sr mechanic had told me about that. Just putting it out there that Is all, but great video Greg and Mike. Greg I have been following you for many years now.
Been here since the get go. I watch on and off but always a fan. I’ve learned a lot from you and can’t wait to get back into a g56. Had to sell my last one due to financial difficulties and it’s the biggest regret I have right now.
I just installed to org duel disc in my 2017 and I had some questions because it is still a stock engine with 146,000 miles on the original clutch. South bend was great with answering the questions and am super happy with the clutch.
For those of you who watched the SouthBend Clutch/Intro video back in 2016 vs watching it now, cheers to you guys with a Monster 🥰🤘🏻🤘🏻, the Thuren 3” lift is is an extremely cool look on the 08, but I still really love the look of it when he had at stock height with the longer control arms in the front and the Hancook Dynapro ATs 305/45R22 on the Jades. Back in 2016 2016 when I was getting overwhelmed with college and needed counseling greg_a videos always gave me something to look forward to, I’m still here today so cheers 🍻🌅😌😌
The street dual will take a TON more power than they say. I’ve got 70,000 miles on mine and it NEVER slips and it puts up with my shenanigans of putting the truck in 4th to start my burnout. That being said, I’ve had a couple in NV5600 trucks and they go into gear slow and shift slower than a dump truck.
You can build my 07 5.9 for content 😅 & make it exactly like your 08. That thing is a beauty. I wish I could make mine like yours. Day 1 subber 🤘😫🖤🚜 oh & it's black :)
Surprised you still went back with atf. Amsoil synchromesh ftw. Also I’m loving my Valair clutch after the rubbers went out and I broke 3 out of 4 ears off the floater plate and destroyed my bell housing
I’ve had the same south bend dual disc in my truck since 2007. Not a minutes trouble. The only thing I don’t like about it is it rattles super loud when you mash the clutch
Greg, what is the make and model of the lift that you have in your garage? Doing some research and need some pointers. Keep up the awesome content. Thanks.
Absolutely do not want clutch noise it sucks so which South Bend clutch is the quietest clutch they make that can Handel 500 ho and I tow and haul a lot of weight so which one do you recommend that makes no noise ?
Does south bend still use the arm or do they use a hydronic carrier bearing that when you push clutch the bearing gets thicker and depressed the clutch ?
I have an 08 Dually . Can I take off the front wheel extenders and run regular rims on the front ? I hate the rim sticking out . I was wondering if I need a special offset ? I saw the one video of you getting rims put on your Dually and want to know if I can do the same thing on my 3rd Gen ?
I had that clutch be4 didn’t like it how trans was shifting , I thought I was the only one with shifting problem till I saw V-belt n son n he had same issue with that setup u just put in ur 08 good luck
My brother has a dual disk southbend in his duramax and it is the loudest most unforgiving or trailer friendly thing ive even driven. . .it sounds like the throw out bearing is bad in it, but i had a guy tell me that the clutch needs strapped and it would quiet it down. . . Do you care to weigh in or make any suggestions? Any input would be appreciated thanks
Any one who has had a trans out of a 1stcgen will appreciate working on the newer trucks....all the aluminum tcases are 50-60 lbs lighter than an np205
Absolutely been with you that long Jesse no boost Johnny send it miss the shenanigans more Jessie no boost Johnny send it and the scrap truck still loving the new content🇺🇲🇨🇦🇨🇦
We need a new scrap truck, absolute beater but 1000hp , ahh I too miss the send it days and Jesse
Send it had is own channel but stopped posting
Yes, those old videos that have a lower quality are gold!
Jesse has his own channel doing snowmobile stuff
Same man
Now this is like the OG videos. Process explanation. Part differences. Wrench workz baby. That’s what it’s all about. Great vid Greg and the boys
The 08 has been run the hardest and run through the most nastiest conditions yet the damn truck is immaculate and absolutely beautiful still. Amazing what some TLC does for a vehicle.
I came around after the clutch video but been following since before the first gen came around. Crazy to think its been that long!
I’ve been here since that first clutch install and the first overview of the 08. Still my favorite look to date!
Dude been here for years by far this truck is the one man im telling u clean dirty even before u changed the suspention
Something about those rollers and april 1st...😂
Look at those pipes, Greggy’s been hitting them curls 💪🏼
og tripple turbo days greg a weather reports and lawn stripes. jackstands and a driveway. and now look well done 🤟👏
That’s how I stumbled into your videos, (clutch install video, back in the driveway) And have been watching ever since.
Your southbend video is why I bought a South bend for my 06, I killed my clutch and you posted immediately about it and the install, love it!
I've been watching the channel since the 05 was a triple turbo 6.4 lol lots changed in 7 years
I can watch greg a videos all day just for the fire soundtrack dawson puts together. Idk where you find these beats but they hit hard.
G56 truck.... that install video helped me install my southbend dual disk, and brought me to your channel ever sense
Following Greg A almost since day one and I actually got into diesel trucks is because of his channel. 🤘🤘🤘🍿🍿
This was a super helpful video. Putting in the street dual disc in my truck tomorrow and hearing that you would recommend it makes me feel so much better about that decision.
Last time I remember Greg a changing the clutch in the 08 was back in NJ in the driveway on the ramps. That looks much easier this time ! Glad to see the 08 getting some love 😬
Been here since then and several years later watched it again when I put a southbend double in my all black 08 dually, I clearly hated your taste in pickups😂😂
The wheel tire setup on the 08 is definitely my favorite 👌
Good job with clutch swap
Recommend using guide studs for removing and installing. Also I use wd40 in my anti seize and also it’s not recommended to use it on wheel studs for reason being if the nuts should come loose you will never know until you feel loose. I have been turning wrenches on tractor trailers for 30 plus years and when I was in my early years a Sr mechanic had told me about that. Just putting it out there that Is all, but great video
Greg and Mike. Greg I have been following you for many years now.
Been here since southbend clutch intro video. Found channel before installing my first DD clutch. Been following along since 👍
Micheal’s face, @2:37 is great.
Slim Greg! Real toned man what ever your doing is working 💪🏾
Put a g56 In my 2001 24 valve. Absolutely love it . Was originally an auto.
Best clutch I’ve had is the clutch masters Deisel street clutch definitely recommend
Always a great day when you get off work and see Greg uploaded a video
Been here since the get go. I watch on and off but always a fan. I’ve learned a lot from you and can’t wait to get back into a g56. Had to sell my last one due to financial difficulties and it’s the biggest regret I have right now.
I just installed to org duel disc in my 2017 and I had some questions because it is still a stock engine with 146,000 miles on the original clutch. South bend was great with answering the questions and am super happy with the clutch.
Favorite truck on the channel. Always going to love manual QCLB 3rd gens. 🤙🏽
Absolutely correct, southbend has excellent quality and customer service 👏
The 08 is my favorite truck you have, after all the mods last time you did videos with it I have been dying to see it hooked up to the Diamond C.
I love that truck. I have been watching you since day one. And haven't missed one video
Should at some point give KY clutch a try. Went with their dual disk kevlar clutch for my 06 g56 and have loved it since.
Still my favourite 3rd Gen around! The way she sits now is the best it has looked 🤘🏻💪🏻👌🏻
For those of you who watched the SouthBend Clutch/Intro video back in 2016 vs watching it now, cheers to you guys with a Monster 🥰🤘🏻🤘🏻, the Thuren 3” lift is is an extremely cool look on the 08, but I still really love the look of it when he had at stock height with the longer control arms in the front and the Hancook Dynapro ATs 305/45R22 on the Jades. Back in 2016 2016 when I was getting overwhelmed with college and needed counseling greg_a videos always gave me something to look forward to, I’m still here today so cheers 🍻🌅😌😌
I just love the 08 looks so damn clean!
Love your videos. Great team on this channel. Always improving both the projects and the filming etc…👍
Id rather watch vids of the 08 over any other truck you have 🤙🏼
When did you go back to the ATF and is it as quiet as the 50w trans oil?
🍿
The street dual will take a TON more power than they say. I’ve got 70,000 miles on mine and it NEVER slips and it puts up with my shenanigans of putting the truck in 4th to start my burnout. That being said, I’ve had a couple in NV5600 trucks and they go into gear slow and shift slower than a dump truck.
You can build my 07 5.9 for content 😅 & make it exactly like your 08. That thing is a beauty. I wish I could make mine like yours. Day 1 subber 🤘😫🖤🚜 oh & it's black :)
anyone been here since the triple turbo?
Damn Greg diesels and weights? Good look!
Surprised you still went back with atf. Amsoil synchromesh ftw. Also I’m loving my Valair clutch after the rubbers went out and I broke 3 out of 4 ears off the floater plate and destroyed my bell housing
Been there since the first clutch!
I ran 3 years on south band dual clutch, amazing clutches for 6.7Lwith the hydraulic option...stock dodge clutch is made out of cardboard...
I’ve had the same south bend dual disc in my truck since 2007. Not a minutes trouble. The only thing I don’t like about it is it rattles super loud when you mash the clutch
Those fresh shave air fresheners slap!
Rick got er shined up reeeaaalllll nice
Ive had great luck with LUK ceramic clutch on my customers trucks. None of them make crazy power but tow daily
Greg, what is the make and model of the lift that you have in your garage? Doing some research and need some pointers. Keep up the awesome content. Thanks.
Love the vids Greg 👍. You do 7 quarts in the trans like all the g56 guys talk about?
Absolutely do not want clutch noise it sucks so which South Bend clutch is the quietest clutch they make that can Handel 500 ho and I tow and haul a lot of weight so which one do you recommend that makes no noise ?
Does south bend still use the arm or do they use a hydronic carrier bearing that when you push clutch the bearing gets thicker and depressed the clutch ?
what fog lights are you runnning
Makes me want to get a long bed😍😍
11:55 Greg A. - "Pulling my trans..squaaat."😆
Dang Greg take it easy on the air fresheners they'll get to ya
The o8 is looking tight 🤑
I have an 08 Dually . Can I take off the front wheel extenders and run regular rims on the front ? I hate the rim sticking out . I was wondering if I need a special offset ? I saw the one video of you getting rims put on your Dually and want to know if I can do the same thing on my 3rd Gen ?
Where can I get ahold of one of those grille cummins badge inserts? Thanks!
Been here since the house garage in NJ.
I had that clutch be4 didn’t like it how trans was shifting , I thought I was the only one with shifting problem till I saw V-belt n son n he had same issue with that setup u just put in ur 08 good luck
you need to get a billet g56 from cody at super sticks. we need to see one of those with all the power in one of your trucks.
Greg been doing quite a bit of work on the 08… almost like he’s getting it ready for a new owner… 🧐🧐🤷🏻♂️
This is my ideal daily kinda truck 🙌🏽🤩🤙🏽
This is gonna be my build when I get my truck! Want it to look exactly like this
@@KraveSanity I love the Cummins logo on the grill🤣🙌🏽
@@RealGyoukai dude literally me too lmaoo, I love the cowl hood too really makes it have that mean look 😈
My brother has a dual disk southbend in his duramax and it is the loudest most unforgiving or trailer friendly thing ive even driven. . .it sounds like the throw out bearing is bad in it, but i had a guy tell me that the clutch needs strapped and it would quiet it down. . . Do you care to weigh in or make any suggestions? Any input would be appreciated thanks
Ayyyy let’s go!!!!
Is 08 the next giveaway??
First greg a video I watched was his dual disk clutch install on this truck
Oh my are you giving away the 08?!
Greg A getting ready to give away the 08 with the new 💎 ...
What diff gears are in this truck
That’s the best air freshener!
Been here since video number one brotha
With age Greg stuff just Falls In….. 👌🏼
Been around since "Johnny send it" broke mama's good shovel! LOL
Have a feeling the 08 is the next giveaway 🤷♂️
Getting the same vibe.
That or the trailer he picked up and parked in the yard😂
That would never happen lol
@@BadGoat92 this didn't age well
Been around since the second video, been a long time since that
Silent Mike getting in touch with his inner Bob Ross painting some happy little anti seize here and there…
How much power do you think a g56 can hold
I forgot if you ever talked about this, but would do a truck give away ??
Rainforest Mist > any other little tree scent
Man I miss most 07.5 6speed :( the only reason I got rid of it was because it was a 2wd
Get yourself the worn leather scented tree
Hey from Canada ont
What’s that tire wheel set up.? 22 12.?
Favorite notification 🤙🏼
Any one who has had a trans out of a 1stcgen will appreciate working on the newer trucks....all the aluminum tcases are 50-60 lbs lighter than an np205
I run their 650hp DD nicest clutch I've ever had
I'm Christmas lights on the trailer in Jersey old...
Them where the days working in the little house shop cutting up trucks for there bits and selling the rest it's been a long old road Greg A
If Greg gives away the 08 I’m gonna cry
Hope we get to see the 08 hit the dyno
Anyone know what taillights are those?
New shave ain’t got nothin on blackberry clove
I think you need to drop the 08 back down and throw some polished wheels on it!
I subscribed at 450 subscribers. I’ve seen it all
🙋🏻♂️
What is it 5 years now since the last clutch?