A cylinder of base diameter 50 mm and height 80 mm rests on its base rim such that its axis is inclined at 45° to HP and remains parallel to VP. A section plane parallel to HP cuts the axis at a distance of 50 mm from the base of the cylinder. Draw its front view and sectional top view.
A cylinder of base diameter 40mm and axis length 60mm is kept on the H.P on a point of its base circle such that its axis is inclined to H.P . at 30 degree and parallel to V.p . Draw the projections of cylindeR.................................................... (Mam plazzz solve on this)
You will get similar diagram with angle 30°, and front view is touching XY line. There is a gap between circle and XY line. We can take any gap between them.
5 A cylinder having a 50mm base diameter and 70mm long axis has a point of its base circle in the V.P. Its axis is inclined at 30 to V.P and 45 to H.P. Draw its projections.
A cylinder of diameter 50 and axis 65 mm long is lying on H.P on its curv surface with axis inclined at 45° to V.P and parallel to HP. Draw the projections Ismei mam circle xy line ke uppar bnaou aur fir square wala cylinder niche uske woh square se ek line leke right mei uske 45 degree leke tilt krduna usko vp mei inclined krne ke liye ...... Right haih aisa?
See all topics for getting 100%marks.its easy to get full marks. Develop interest in drawing, watch all videos. Drawing is an art & fun. Try to get maximum marks not only pass marks
Ma'am please make videos on nut bolts rivets and joint there is my exam in mid july please ma'am if your are free just basic teachings ma'am because i am not from mechanical branch my branch is civil engineering
After along time I watched your video it's still I understand well what u r saying. Tnq mam for doing such videos
A cylinder of base diameter 50 mm and height 80 mm rests on its base rim such that its axis is inclined at 45° to HP and remains parallel to VP. A section plane parallel to HP cuts the axis at a distance of 50 mm from the base of the cylinder. Draw its front view and sectional top view.
really superb explanation mam😇💗
By seeing your video iam going to attend exam tomorrow 😁
Me too🫶🏻
Super explanation with good example easy to understand
Thank u.
I am good learner from your teach mam...thank you for your supporting..
I can easily learned projection of solid:cylinder....with help of ur explanation mam
It's nice. All the best for your studies.
Share my channel with students, like & subscribe.
@@engineeringclassesbydr.noo3377 definitely mam..our eg sir recommend ur channel
It's nice
Mam continue this u r a good teacher useful with u videos from TN
Pls share my channel with your friends
Superb explanation keep going mam
Thank you very much.
Thank you so much ma'am
Thank u so much mam...for ur wonderful class ..
All the Best for your Studies.
@@engineeringclassesbydr.noo3377 thank you mam 🙏
Your teaching is super madam
Share my channel with students
Oky madam
Tq mam .I understand Easley . Continue and do many videos
A cylinder of base diameter 40mm and axis length 60mm is kept on the H.P on a point of its base circle such that its axis is inclined to H.P . at 30 degree and parallel to V.p . Draw the projections of cylindeR.................................................... (Mam plazzz solve on this)
You will get similar diagram with angle 30°, and front view is touching XY line. There is a gap between circle and XY line. We can take any gap between them.
Thank you ma'am, so much help in exam time...too good ❤️
All the Best for your exams.
Awesome mam❤ I thought graphic is so hard but after watching this now I m feeling positive that I can crack the exam
Very Good. Yes u can. All the Best.
Mam thank you so much... Tomorrow is my exam an now I am. Ready!!😅
5
A cylinder having a 50mm base diameter and 70mm long axis has a point of its base circle in the V.P. Its axis is inclined at 30 to V.P and 45 to H.P. Draw its projections.
Check the playlist for this question
Perfect explanation mam 👍
Thank you
Nice explanation mam
Thank u
A cylinder of diameter 50 and axis 65 mm long is lying on H.P on its curv surface with axis inclined at 45° to V.P and parallel to HP. Draw the projections
Ismei mam circle xy line ke uppar bnaou aur fir square wala cylinder niche uske woh square se ek line leke right mei uske 45 degree leke tilt krduna usko vp mei inclined krne ke liye ...... Right haih aisa?
Right haih
Itna krne ke baad joh uppar 2 circle banenge usme se 1 full line or second vala kaisa rahega half shaded or full?
???
???
Second vala half dashed line
Mam the 70mm generator isn't touch the x-axis or not mam
Yes
Thank uh ma'am ❤️ finally understand projection of solid - cylinder
Share my channel with students
@@engineeringclassesbydr.noo3377 sure ma'am 🙂
Mam circle is compulsory divided into 12 parts or 8 parts
We can divide as we wish.
Thnk u mam👍
I can easily understand
Maam i need one help
Am not able to do one question...can uh plz explain?
Sure. Pls share the question.
Why circle touch the xy reference line mam
It has given in the question that one of the generator in the V.P.
Yes mam your video are very helpfull
It's nice, thank u. Like, subscribe and share my channel with your friends
@@engineeringclassesbydr.noo3377 Yes mam I had shared
Mam please give some important questions for exam preparation 🙏
Conic sections, Involutes& isometric Views& projections
@@engineeringclassesbydr.noo3377
Thank you so much mam.i was really confused which topic I have to study for exam. Now I'm clear now .
Thanks alot mam
See all topics for getting 100%marks.its easy to get full marks. Develop interest in drawing, watch all videos. Drawing is an art & fun. Try to get maximum marks not only pass marks
@@engineeringclassesbydr.noo3377
Ok mam your explanation is so Mach intractive and getting easy to understand
Excellent
Share with students
Defenitely mam
🎉
Plz tell where we can use h , hp and 2h pencil
Front view and top view should with HB, Extension lines should with H and dimensional lines with 2H.
@@engineeringclassesbydr.noo3377 thank u mam
Tanks mam your saying excellent mam
Share my channel with your friends
Nice mam
Share my channel with students, like & subscribe.
Mam central axis is not mentioned. O1, O2
Pls do it at center of Cylinder in your practice of Drawing
@@engineeringclassesbydr.noo3377 ok mam
Like, subscribe and share my channel with your friends.
Hi
Ma'am please make videos on nut bolts rivets and joint there is my exam in mid july please ma'am if your are free just basic teachings ma'am because i am not from mechanical branch my branch is civil engineering
Why we divide in 12 parts 6 parts can also be devided