Here is an tip: The cotton absorption pads can shed tiny particles on the screen. To prevent this, take your thumb and index finger and rub the absorption pads for a few seconds to get rid of any fragments that might fall off the pads and onto your screen.
Your instructions have helped me install my whitestone dome screen perfectly. Your pacing and instructions are impeccable. You have removed my fear and stress of installing this very intimidating screen protector. Bravo 👏
Totally. It really seemed like a loaded gun with those horror stories of broken phones when installed incorrectly. If u do it exactly like described here it'll work out beautifully.
I was unsure about this screen protector and the installation process. You put together a better installation video that Whitestone. Thank you so much for taking the time to put this together.
Treated this like phone surgery. Followed your advice- Watched video 2 times prior to get familiar with parts and fit- and replayed your steps as I installed it, and It came out Perfect! Thank you for the video. Using UAG Monarch Carbon Fiber with CF skin on the back. Basically requires meticulous attention to detail.
Thanks so much for making this! Watched it through and then followed it through again with the actual install on my Note 20 Ultra - it went perfectly thanks to your video! I appreciate it. I've never installed a Whitestone Dome before, but it seems like a must for Samsung devices.
This is a great tutorial that is clear and concise, and spaced out nicely with perfect timing. The video is well done, too, with close-ups and easy to see. THANK YOU! On my first attempt, I watched a different video after reading the instructions, and the attempt failed. It was a huge mess! Bummer. I was afraid to try it again. But when I found this tutorial and watched it, I felt better about giving it another go. I took the daring leap and went ahead. This second time worked much better! Perfect, actually, although I did a second one-minute cure. I can't even tell a protective screen on ~ I love it. S-pen works perfectly, as do my fingerprints. 👍👏🏼🙏 ** I do want to point out that if anyone has anything on the back of their phone, such as EMF protectors, for example, REMOVE them first before you start the process. They will throw off the liquid adhesive's centering and movement, and you'll have a disaster on your hands. I hope that helps!
Thank you boss! I tried this on my last phone without watching any help vids. I had to junk do it twice. Got it on my first shot this time. Excellent tutorial!
Just completed the installation with your guide. The most difficult part for me was guiding the adhesive in the middle lol. That was time consuming but I guess worth it in the end. Thank you!
The fingerprint scanner works perfectly, the screen feels great, very smooth. It comes with 2 screen protectors so I was able to apply for 2 phones. Definitely would recommend.
This was a damn near perfect tutorial... As many have already stated, it was definitely intimidating but if you follow this tutorial step by step, you will be successful... That was my experience, anyway.
Thanks man it installed perfectly. The fingerprint Sensor is a tiny bit more slow and inaccurate now but I guess this is the best possible. Certainly completely bubble free and beautiful. S pen and general udage works flawlessly. Thanks for the calm and thorough tutorial.
Good instructions, helpfull to see how its done. Tip from me, dont ever work above the object. This could cause items drop on top or to get dirt/dust stuck in the glue.
Thanks for the guide, definitely more helpful than the paper guide. Their would be less Amazon complaints if more people would see this video before installing. FYI everyone, it is compatible with a dbrand grip case and skins, the screen protector doesn't get in the way of the case. I also definitely recommend getting the camera screen protector while your at it, it also maintains a flush, flat fit with a dbrand grip case on the back, even with the camera skin on top of it. Dbrand Skin + Grip Case + Whitestone Dome Glass Screen Protector = ultimate stylish protection. Definitely what I'm going to stick with for now on. You definitely get what you pay for, and with a 1k phone, why cheap out on the protection?
Just followed all your tutorial and installed the Dome Glass on my Note 20 Ultra. It is really helpful, thank you very much! Just like to point out I bought the Dome Glass from Mobile fun and it only came with one protector with the cost of £45!! Should have double checked before I ordered as Amazon is offering £39 for two.
It's so crazy how the more of these you put on your phone the easier it gets you know like you already know what to look for and what to do I put this on my Note 20 recently and I really wish I would have done it with before even using the phone because I already had a few micro scratches not too bad not noticeable but just I know it's there you know
In your video when the screen was off at 15:33, I could see a "cutout" (change in reflectivity) for the fingerprint sensor. Can this be seen when the screen is on? I have a protector now that has this and it drives me insane. Was this just an oily fingerprint you left behind after touching it? I hope so.
Thank you sir, your video helped me install my white stone protector on my note 20 ultra. I did end up failing on the first attempt, only because when I attempted to align the screen protector to the bottom of the phone the protector went slightly under the upper plastic guide which caused the protector to be placed slightly lower than it was supposed to be. I tried correcting it by moving it around slightly before curing and this only made things worse. Luckily it came with 2 protectors so I made sure the 2nd time around to hold down the upper plastic portion onto the lower plastic base so that the screen protector wouldn't slide underneath during placement.
Great video! I use the Whitestone dome screen protector on my S20+. I also use the Otterbox Defender Pro. I have had no problems with the screen protector coming up! Thanks for sharing! Have a great and awesome day!
Excellent guide used it yesterday. Fingerprint works fine. Though not realizing that the screen protector is a tad bit lower than where it's supposed to be. From the top, like a quarter thick of the top is not protected.
This is detailed step by step tutorial, review and test of the whitestone dome glass screen protector for the Samsung Galaxy Note 20 Ultra. Full index can be found in the Show more area.
Sir, how is the clearity of back camera protector? Can you rate it out,while using the camera with Flash.Does it give a pale shade in the very captured picture.?Which is indubitably, a prevalent problem in all full sized camera protection films.Thanks
Be careful of warm weather changing the viscosity of the adhesive, can mess you up when it's too thin. Had to do some fiddling as the bubble spread way too wide when dropping onto the screen, which caused a bubble to appear when dropping the protector down.
thank you so much i did this with my note 20 about 2 months ago and it was perfect, the whole kit looked intimidating lol. But sadly i broke that phone so just got the note 20 ultra, everything went smooth for me but this time I do have 2 tiny dots. you only see it if your really looking but it kinda bugs me. I guess my lesson is dont leave your phone in your hoodie pocket while messing around on your dirt bike.
One tip you want to tell users. I've failed at 2 replacements the last 2 weeks. One I had the protector up too far. In future videos you may want to mention for the user to put the protector on right side up. I just failed again putting one upside down and have to reorder replacements.
Excellent guide, helped me to install the glass protector perfectly, the first try. However, judging by your video, mine glass is a good 1.5-2 mm shorter, then yours. Bought it directly from the Whitestone site. With a discount though, maybe the batch was defective, or something.
Why no S22 Ultra Whitestone dome install videos? Your Whitestone videos are the best I've watched a lot of videos for a lot of different phones and yours beat them all! Please make one for the S22 Ultra
After you touched the fingerprint sensor I noticed there is a spot on the glass when the screen turned off. I've heard that spot doesn't go away. Is that true?
Just got my 2 in (got my 2nd Note 20 UW last night) and watching again. I did have to remove the protector on an S10 before and reinstall, but it's a PAIN to get all the Mica solution off the protector. Another improvement is an optional 1-minute timer on the light. Last time I tightly wrapped electrical tape around the power buttons on 2 lights and left them across the phone for a longgggg time lol.
Thank you so much. I have been buying cheap screen protectors and they keep messing with the fingerprint reader. I can't seem to find one that works properly with the fingerprint reader. This is a problem because all of my banking apps use fingerprint authentication. And if it detects a mis-read fingerprint while trying to access bank accounts a certain number of times it will delete all my login information for banking and force me to log into my bank all over again... and it's pain in the ass. So I'm plurging on this one. It's comes tomorrow
If anyone uses the Zero Lemon battery pack case, I'll be adding this to mine this week and will know if it will work. The Zero Lemon is very similar to the Mophie Juice Packs, but they didn't make them for the Note20 so I had to shop around. I've only had it for a few days, but so far I think it's better than Mophie. 1 piece, rubberized, works the same way. Mine is the 5000 mah and they have a 10,000 but obviously more bulk. Costs less than Mophie too. 👍
Hello, EBPMAN Tech Reviews! I know your video is already 2 years old, but your Amazon affiliated link still works! :) I have a little question before I purchase it. My Samsung Galaxy Note 20 Ultra still has it's original screen protection on, but it has light scratches all over, and it started pilling off a little bit. In your video seems like you didn't remove it. Is that okay if I remove mine before I try Whitestone Dome Glass? Thank you!
The kit came with two screen protectors and two tubes of adhesive, but there is only one set of tape covers, so I can't install the second protector. I tried using tape but it's too thick and doesn't allow to phone to fit into the tray. I just checked Whitestone's website and I don't see any of those parts sold separately. I just removed my damaged protector because I thought I could install the second one...
Somebody gave me this tip along time ago.... Go into the bathroom and run the hot shower for like 5 minutes. The steam will knock all the dust out of the air. Then do your install im there with no worries about dust particles on your screen!
The biggest problem was that the screen shield totally moved up when I pulled that black tab back. Luckily I was able to readjudt it in time before the liquid spread out too much.
Hey how are you? I used your video, really detailed and like, clean install in first try. Is ok for me to put it on my amazon review, so more people have the same expirience?
Hi, very good video.. I have been using my Note 20 Ultra 5G which I received from pre ordering without any screen protector. I am using the Spigen Tough Armor casing. I like to check with you if this will fit?
Note: for all that is sacred and holy, make sure the damn the tab you pull to allow the protector to sit on the screen is in all the way before placing the screen on it! Mine came out a bit, allowing the protector to go under the plastic template and screwing the whole thing up!! Thankfully I got a two pack or I would've been way too frustrated!
my concern is putting glass and the liquid adhesive on the glass and on top of the camera which is more that the light has to pass thru to get to the camera sensor? Has anyone ever tested the camera before and after applying?
I wouldn't say I like the pull tab because it takes too much force to pull out of the socket. I used it this time, but I think next time I will try another solution...
1 question. I know the UV light cures the liquid to turn it to glass but you only cured the top and bottom. What about the center area. Whitestone used to instruct you to do the entire screen surface, not just top and bottom. How does the center area turn to glass w/o using the light on it ?
I got a little glue in the bottom bezel. I flipped. But I just took a little thin piece of hard plastic it came right out. I have phone OCD. Be aware this screen protector does not cover the whole screen. There is a gap on the bottom for those who don't use a case. This is Otterbox Defender Pro Compatible. To put the iceing on the cake I dropped my phone while doing the installation but I caught it with my feet. Whoo....I would of hit the ceiling if I cracked my 1400$ phone while trying to install something to protect it from exactly what I just did. If you follow this guy's directions to a T..Your good.
I have a few spots on my device that look like either very tiny air bubbles or maybe some debris so I'm a little bummed about that. Is this normal or did I not clean properly? Will they go away if they are air bubbles?l
interesting but my fingerprintsensor does not work anymore after installing the whitestone protector. how can this be possible? I have put the screensensitivity on high and I tried to reinstall my fingerprints, but ist does not work. Any suggestions?
Whitestone screen protector is expensive but it comes with lifetime warranty. If you break it, or it has chips or Crack. Just pay $9 for shipping and they will send you new one
mine didn't push the glue all the way to the edges, that's a firs for whitestone... the Galaxy Note 205G and it made it to top corner but the other top corner it didn't make it to and the bottom totally didn't get the glue ,,, followed instructions and the glue was in the bubble but the screen protector got hung up on the top of this contraption and I didn't notice until glue started spreading then pushed the top of phone screen down and pulled top plug thing and glue never made it to top rt of screen or bottom... sad... I didn't READ the instructions in the BOX... I would have seen the instructions on NOT TO DO THIS NEXT TO A WINDOW... UV light comes in... And causes the glue to cure...
When I did this, it looks like I got glue in the bottom of the screen and on some places on the side of the screen. Could this happen and is it dangerous/could it hurt the screen? Thankful for answer.
WARNING THIS CAN DAMAGE YOUR PHONE IS SOMETHING GOES WRONG: These whitestone screen protectors damaged a few phones displays of a Samsung Galaxy S21 Ultra, & Note 20 Ultra I installed it on. The UV Glue got past the absorbing pads and got in between where the Glass display meets the metal frame and cause a permanent large dark spot inside the display on both phones. It damages the displays. Had to pay Samsung $700.00 to replace two displays for two brand new out the box galaxy phones. They wouldn't cover the phones under warranty because the said the glue is considered as liquid damage.
Hey good vid. I installed my screen protector today on my note 20 ultra and now my finger print is slow and alot of hit or miss. Is there a quick fix that doesn't require me to register fingerprints again? I got my phone new in August and registering again causes all kinds of havoc on the banking apps
Probably should take the pen out first. What if you have bubbles after applying the screen onto the liquid? Is okay to push it around with a credit card or something
The key is to have bubble free before you cure if you have a bubble you need to remove and reapply the liquid. You need to clean off the screen well and protector
UAG Monarch works perfectly with the whitestone. Tried out the Plasma series and it works as well! Just that I own the Monarch, have been using it for 1 month, dropped it a couple of times, doesn't push the glass. Stay away from Spigen, went down to a shop and tried them on, edges of the glass are REALLY close to the case lip. Too close for comfort.
So excited to get and install my Whitestone Dome glass on my Note 20 Ultra...then opened box to find BOTH screen protectors shattered 😭. Finding that Whitestone support is crap. They don't reply to emails nor have a phone number to call them. May have a great product but I'd support is lacking then just not worth the time or money 💰
Does anyone else have issues with the fingerprint sensor not working with Whitestone Dome?? I've deleted my old fingerprints and increased my screen sensitivity and my Note20 Ultra still can't register my prints. 😫😫
Installation for this screen protector is so hit or miss. I followed the instructions EXACTLY as printed and watched three different videos and there wasn't enough adhesive that came out of the black tube to reach one of my phones corners (waited the full 80 seconds). This was on a totally flat surface and the adhesive bubble was perfectly centered under the guide when I removed the tab. So I tried to press down to get the adhesive to that corner and it created micro bubbles that are impossible to remove. And I also notice the screen protector moves a lot vertically when on the phone when the adhesive isn't cured. The clear plastic guide has TERRIBLE tolerances and the two triangle guide protrusions to center the screen protector vertically located on the top and bottom of the top guide when the top guide is securely fitted to the bottom guide. These poor tolerances allow the screen protector to go under the triangle tabs and move vertically. I also noticed that the screen protector edges aren't curved enough to properly fit my Note 20 Ultra and are slightly "lifted" from the edges of the phone. Overall I cannot believe I spent $65 on something that his this shoddy of an installation procedure. Almost want to rip it off and throw it away. You always learn that more expensive doesn't always equal better.
Sorry to hear that. I have mine on my note 20 ultra and it's still solid. I havr a cheaper alternative coming this week. So stay tuned. I have installed them before too and they are really good
Yeah I think that happened to me with my Note 10 plus because my speaker was crackling a little bit and for a long time I'm thinking they gave me a defective unit but then after installing another one of these screen protectors that's when I thought oh man I probably got glue in it hahaha
This screen protector is garbage. Had it way back on my S10+ for less than 1 week. The adhesive from the side will eventually start to collect dust and the fingerprint sensor is a hit or miss. Definitely not worth it for $95.
you probably didn't install in correctly. I had mine on my galaxy 9 plus for 2+ years and the adhesive never came off.the only time it started lifting was when i dropped it and it cracked then it was downhill from there but it at least lasted 2 years
ive done this three times now and i swear im doing it perfectly but it always messes up. Tried to contact support since they have a life time warrenty and because they cost more than any other screen protector. They wont even respond. I dont care how good they are if you install correctly i wont reccommend a company with support like that to anyone.
I have been reading very mixed reviews about not just the main screen protector, but also the camera protector. Have you tested it with flash since this install and how have both protectors held up? Other question would be if you've had to deal with whitestone customer service and if so, how was your experience? Have read they are really unresponsive 😕 It seems like this is the best option out there for glass screen protector for the note 20 ultra, all others seem to cause the fingerprint sensor function to be completely useless. But with the whitestone it seems very hit or miss if the protector/camera function/customer service are going to be good. If anybody else wants to chime in after having had either or both of the screen protectors for a while now, that would be great as well! **Edit: and if someone has experience in removing the screen protector, any insight or tips/tricks are appreciated because the prospect of possibly having to take something glued on with UV glue back off of my phone screen, is giving me anxiety. The application process is too, don't get me wrong! 🤣
I have the protectors on all out phones and the kids too. No issues. On the Marra lenses side. I had it on my phone and just took it off. I never have issues with my lense cracking or scratch. But I did take pics with it on and didn't see any issues but I rarely use flash
I was worried about my case working with this screen protector also. Im happy to say that my otterbox had no issues! Not sure about the speck cases though
Yes, wipe it with alcohol pad , but gently. However, I did the UV light curing more thoroughly than what's shown. I used my fingernail edge to very gently run along the edge where i had 1 or 2 small glue excess spots. don't apply pressure while doing this. Just follow the edge where the spots are at until they dissolve . excess alcohol or pressure, ( especially before its had some curing may cause issues .)
Here is an tip: The cotton absorption pads can shed tiny particles on the screen. To prevent this, take your thumb and index finger and rub the absorption pads for a few seconds to get rid of any fragments that might fall off the pads and onto your screen.
Your instructions have helped me install my whitestone dome screen perfectly. Your pacing and instructions are impeccable. You have removed my fear and stress of installing this very intimidating screen protector. Bravo 👏
Good job sweet 💙 heart 😃
Totally. It really seemed like a loaded gun with those horror stories of broken phones when installed incorrectly. If u do it exactly like described here it'll work out beautifully.
I was unsure about this screen protector and the installation process. You put together a better installation video that Whitestone. Thank you so much for taking the time to put this together.
This saved me from near-cardiac arrest trying to install this thing. THANK YOU!
I am glad this helped
Treated this like phone surgery. Followed your advice- Watched video 2 times prior to get familiar with parts and fit- and replayed your steps as I installed it, and It came out Perfect! Thank you for the video. Using UAG Monarch Carbon Fiber with CF skin on the back. Basically requires meticulous attention to detail.
Thanks so much for making this! Watched it through and then followed it through again with the actual install on my Note 20 Ultra - it went perfectly thanks to your video! I appreciate it. I've never installed a Whitestone Dome before, but it seems like a must for Samsung devices.
Cool. Glad it worked
This is a great tutorial that is clear and concise, and spaced out nicely with perfect timing. The video is well done, too, with close-ups and easy to see. THANK YOU! On my first attempt, I watched a different video after reading the instructions, and the attempt failed. It was a huge mess! Bummer. I was afraid to try it again. But when I found this tutorial and watched it, I felt better about giving it another go. I took the daring leap and went ahead. This second time worked much better! Perfect, actually, although I did a second one-minute cure. I can't even tell a protective screen on ~ I love it. S-pen works perfectly, as do my fingerprints. 👍👏🏼🙏 ** I do want to point out that if anyone has anything on the back of their phone, such as EMF protectors, for example, REMOVE them first before you start the process. They will throw off the liquid adhesive's centering and movement, and you'll have a disaster on your hands. I hope that helps!
Why don't you cure the middle of the phone with UV-light?
This is an excellent video sir. Whitestone should use this video on their website. The production quality is phenomenal. Thank you
Thank you boss! I tried this on my last phone without watching any help vids. I had to junk do it twice. Got it on my first shot this time. Excellent tutorial!
Just completed the installation with your guide. The most difficult part for me was guiding the adhesive in the middle lol. That was time consuming but I guess worth it in the end. Thank you!
Thank you so much for your tutorial. I followed your instructions step by step. Very well explained and worked first time. 👏🏽
The fingerprint scanner works perfectly, the screen feels great, very smooth. It comes with 2 screen protectors so I was able to apply for 2 phones. Definitely would recommend.
Play the "Mission Impossible" theme in the background, when placing the bridge on top while with your body being suspended from the ceiling. :D
This was a damn near perfect tutorial... As many have already stated, it was definitely intimidating but if you follow this tutorial step by step, you will be successful... That was my experience, anyway.
Does the Dome glass fits perfectly with Spigen Tough Armor? Thanks in advance.
The best guide ever!
Thanks man it installed perfectly. The fingerprint Sensor is a tiny bit more slow and inaccurate now but I guess this is the best possible. Certainly completely bubble free and beautiful. S pen and general udage works flawlessly. Thanks for the calm and thorough tutorial.
Did you get it recently?
I want to buy one but it's out of stock on amazon.
Good instructions, helpfull to see how its done. Tip from me, dont ever work above the object. This could cause items drop on top or to get dirt/dust stuck in the glue.
I recommend Whitestone to EVERYONE!! They are spectacular from a technical and a "standard" perspective.
On all my phones!
Super detailed video as usual. Really appreciate you making these! 👍
Very nice video! Thank you so much for your time and help in installation of Dome Glass. It was very helpful!
Thanks for the guide, definitely more helpful than the paper guide. Their would be less Amazon complaints if more people would see this video before installing. FYI everyone, it is compatible with a dbrand grip case and skins, the screen protector doesn't get in the way of the case. I also definitely recommend getting the camera screen protector while your at it, it also maintains a flush, flat fit with a dbrand grip case on the back, even with the camera skin on top of it. Dbrand Skin + Grip Case + Whitestone Dome Glass Screen Protector = ultimate stylish protection. Definitely what I'm going to stick with for now on. You definitely get what you pay for, and with a 1k phone, why cheap out on the protection?
Just followed all your tutorial and installed the Dome Glass on my Note 20 Ultra. It is really helpful, thank you very much! Just like to point out I bought the Dome Glass from Mobile fun and it only came with one protector with the cost of £45!! Should have double checked before I ordered as Amazon is offering £39 for two.
Thank you for nice Video ! Awesome :)
Wait, hello
It's so crazy how the more of these you put on your phone the easier it gets you know like you already know what to look for and what to do I put this on my Note 20 recently and I really wish I would have done it with before even using the phone because I already had a few micro scratches not too bad not noticeable but just I know it's there you know
Thanks for your amazing review for Whitestone
In your video when the screen was off at 15:33, I could see a "cutout" (change in reflectivity) for the fingerprint sensor. Can this be seen when the screen is on? I have a protector now that has this and it drives me insane. Was this just an oily fingerprint you left behind after touching it? I hope so.
Excellent tip on the power bank!!!!
Dude, that was really clear, great instructions, many thanks, it all went perfectly after watching your video twice. You da man!
Thank you sir, your video helped me install my white stone protector on my note 20 ultra.
I did end up failing on the first attempt, only because when I attempted to align the screen protector to the bottom of the phone the protector went slightly under the upper plastic guide which caused the protector to be placed slightly lower than it was supposed to be.
I tried correcting it by moving it around slightly before curing and this only made things worse.
Luckily it came with 2 protectors so I made sure the 2nd time around to hold down the upper plastic portion onto the lower plastic base so that the screen protector wouldn't slide underneath during placement.
Great video! I use the Whitestone dome screen protector on my S20+. I also use the Otterbox Defender Pro. I have had no problems with the screen protector coming up! Thanks for sharing! Have a great and awesome day!
Excellent guide used it yesterday. Fingerprint works fine. Though not realizing that the screen protector is a tad bit lower than where it's supposed to be. From the top, like a quarter thick of the top is not protected.
Hmm. That's odd. Does it look the same as mine?
*you wanna make sure all fans are off*
except for the PC RGB dust collector fans in the background. Keep those on.
This is detailed step by step tutorial, review and test of the whitestone dome glass screen protector for the Samsung Galaxy Note 20 Ultra. Full index can be found in the Show more area.
Sir, how is the clearity of back camera protector? Can you rate it out,while using the camera with Flash.Does it give a pale shade in the very captured picture.?Which is indubitably, a prevalent problem in all full sized camera protection films.Thanks
@@FarhanAli-xy5km I took some pics and have not noticed anything different with and without flash. I have not tested night shots only
@@ebpman Thanks Sir
the install videos help me do perfect install. dome glass feels really nice I was not expecting much of a change
Be careful of warm weather changing the viscosity of the adhesive, can mess you up when it's too thin.
Had to do some fiddling as the bubble spread way too wide when dropping onto the screen, which caused a bubble to appear when dropping the protector down.
Thank you you made a excellent video for putting on the screen protector it helped me out alot
If you continue to watch this video, you could tell it’s very easy to install.......
This looks a job for those Vietnamese folks in the nail salons. They have impeccable hand to eye co-ordination.
Does this work with Unicorn beetle cases?
Thank you for such detailed instructions. These are complex to install and the manufacturer's instructions are almost useless.
thank you so much i did this with my note 20 about 2 months ago and it was perfect, the whole kit looked intimidating lol. But sadly i broke that phone so just got the note 20 ultra, everything went smooth for me but this time I do have 2 tiny dots. you only see it if your really looking but it kinda bugs me. I guess my lesson is dont leave your phone in your hoodie pocket while messing around on your dirt bike.
You made it easy for me, thanks
Hi!
16:35 does it affect the result of the photos? will it be more blurry?
2:35
One tip you want to tell users. I've failed at 2 replacements the last 2 weeks. One I had the protector up too far. In future videos you may want to mention for the user to put the protector on right side up. I just failed again putting one upside down and have to reorder replacements.
Excellent guide, helped me to install the glass protector perfectly, the first try. However, judging by your video, mine glass is a good 1.5-2 mm shorter, then yours. Bought it directly from the Whitestone site. With a discount though, maybe the batch was defective, or something.
Why no S22 Ultra Whitestone dome install videos? Your Whitestone videos are the best I've watched a lot of videos for a lot of different phones and yours beat them all!
Please make one for the S22 Ultra
Working on it now. Thanks for asking
Where did you get the wallpaper that says "not Apple it's Samsung"... I love it!
After you touched the fingerprint sensor I noticed there is a spot on the glass when the screen turned off. I've heard that spot doesn't go away. Is that true?
Just got my 2 in (got my 2nd Note 20 UW last night) and watching again. I did have to remove the protector on an S10 before and reinstall, but it's a PAIN to get all the Mica solution off the protector.
Another improvement is an optional 1-minute timer on the light. Last time I tightly wrapped electrical tape around the power buttons on 2 lights and left them across the phone for a longgggg time lol.
Thank you so much. I have been buying cheap screen protectors and they keep messing with the fingerprint reader. I can't seem to find one that works properly with the fingerprint reader. This is a problem because all of my banking apps use fingerprint authentication. And if it detects a mis-read fingerprint while trying to access bank accounts a certain number of times it will delete all my login information for banking and force me to log into my bank all over again... and it's pain in the ass. So I'm plurging on this one. It's comes tomorrow
Thanks my man!
Don't get it why not just drop the liquid in the center?
If anyone uses the Zero Lemon battery pack case, I'll be adding this to mine this week and will know if it will work. The Zero Lemon is very similar to the Mophie Juice Packs, but they didn't make them for the Note20 so I had to shop around.
I've only had it for a few days, but so far I think it's better than Mophie. 1 piece, rubberized, works the same way. Mine is the 5000 mah and they have a 10,000 but obviously more bulk. Costs less than Mophie too. 👍
Very thorough explanation 👍
Hello, EBPMAN Tech Reviews! I know your video is already 2 years old, but your Amazon affiliated link still works! :) I have a little question before I purchase it. My Samsung Galaxy Note 20 Ultra still has it's original screen protection on, but it has light scratches all over, and it started pilling off a little bit. In your video seems like you didn't remove it. Is that okay if I remove mine before I try Whitestone Dome Glass? Thank you!
This guy is intense.
The kit came with two screen protectors and two tubes of adhesive, but there is only one set of tape covers, so I can't install the second protector. I tried using tape but it's too thick and doesn't allow to phone to fit into the tray. I just checked Whitestone's website and I don't see any of those parts sold separately. I just removed my damaged protector because I thought I could install the second one...
Somebody gave me this tip along time ago.... Go into the bathroom and run the hot shower for like 5 minutes. The steam will knock all the dust out of the air. Then do your install im there with no worries about dust particles on your screen!
The biggest problem was that the screen shield totally moved up when I pulled that black tab back. Luckily I was able to readjudt it in time before the liquid spread out too much.
thank you so much it is so helpful and clear
Hey how are you? I used your video, really detailed and like, clean install in first try. Is ok for me to put it on my amazon review, so more people have the same expirience?
Hi, very good video.. I have been using my Note 20 Ultra 5G which I received from pre ordering without any screen protector. I am using the Spigen Tough Armor casing. I like to check with you if this will fit?
Note: for all that is sacred and holy, make sure the damn the tab you pull to allow the protector to sit on the screen is in all the way before placing the screen on it! Mine came out a bit, allowing the protector to go under the plastic template and screwing the whole thing up!! Thankfully I got a two pack or I would've been way too frustrated!
my concern is putting glass and the liquid adhesive on the glass and on top of the camera which is more that the light has to pass thru to get to the camera sensor? Has anyone ever tested the camera before and after applying?
I wouldn't say I like the pull tab because it takes too much force to pull out of the socket. I used it this time, but I think next time I will try another solution...
1 question. I know the UV light cures the liquid to turn it to glass but you only cured the top and bottom. What about the center area. Whitestone used to instruct you to do the entire screen surface, not just top and bottom. How does the center area turn to glass w/o using the light on it ?
I got a little glue in the bottom bezel. I flipped. But I just took a little thin piece of hard plastic it came right out. I have phone OCD. Be aware this screen protector does not cover the whole screen. There is a gap on the bottom for those who don't use a case. This is Otterbox Defender Pro Compatible. To put the iceing on the cake I dropped my phone while doing the installation but I caught it with my feet. Whoo....I would of hit the ceiling if I cracked my 1400$ phone while trying to install something to protect it from exactly what I just did. If you follow this guy's directions to a T..Your good.
I have a few spots on my device that look like either very tiny air bubbles or maybe some debris so I'm a little bummed about that. Is this normal or did I not clean properly? Will they go away if they are air bubbles?l
interesting but my fingerprintsensor does not work anymore after installing the whitestone protector. how can this be possible? I have put the screensensitivity on high and I tried to reinstall my fingerprints, but ist does not work. Any suggestions?
Whitestone screen protector is expensive but it comes with lifetime warranty. If you break it, or it has chips or Crack. Just pay $9 for shipping and they will send you new one
I can't get my fingerprint scanner to work after the install. It would not register my print again
When taking pictures with the rear camera and using the flash does the picture have a blue hue to it?
Why no cure for the middle of screen? Just top and bottom
mine didn't push the glue all the way to the edges, that's a firs for whitestone... the Galaxy Note 205G and it made it to top corner but the other top corner it didn't make it to and the bottom totally didn't get the glue ,,, followed instructions and the glue was in the bubble but the screen protector got hung up on the top of this contraption and I didn't notice until glue started spreading then pushed the top of phone screen down and pulled top plug thing and glue never made it to top rt of screen or bottom... sad... I didn't READ the instructions in the BOX... I would have seen the instructions on NOT TO DO THIS NEXT TO A WINDOW... UV light comes in... And causes the glue to cure...
Will a white stone screen protector on a note 20 ultra install with a OtterBox defender case
When I did this, it looks like I got glue in the bottom of the screen and on some places on the side of the screen. Could this happen and is it dangerous/could it hurt the screen? Thankful for answer.
the best
Thankyouuuu sir!
WARNING THIS CAN DAMAGE YOUR PHONE IS SOMETHING GOES WRONG: These whitestone screen protectors damaged a few phones displays of a Samsung Galaxy S21 Ultra, & Note 20 Ultra I installed it on. The UV Glue got past the absorbing pads and got in between where the Glass display meets the metal frame and cause a permanent large dark spot inside the display on both phones. It damages the displays. Had to pay Samsung $700.00 to replace two displays for two brand new out the box galaxy phones. They wouldn't cover the phones under warranty because the said the glue is considered as liquid damage.
Hey good vid. I installed my screen protector today on my note 20 ultra and now my finger print is slow and alot of hit or miss. Is there a quick fix that doesn't require me to register fingerprints again? I got my phone new in August and registering again causes all kinds of havoc on the banking apps
I put it wrong, can I take it of and set it again?
Is it case friendly?!
Does it work with OtterBox Defender?
Probably should take the pen out first. What if you have bubbles after applying the screen onto the liquid? Is okay to push it around with a credit card or something
The key is to have bubble free before you cure if you have a bubble you need to remove and reapply the liquid. You need to clean off the screen well and protector
@@ebpman awesome I'll keep that in mind when I get mine in the mail. Thank you for the quick reply 🙏🤙👍🤘
That,s a good idea 💞💞💞💞
Could you tell me on which website you bought the screen protector kit. I would greatly appreciate it. Greetings.
I saw it on Amazon
Any word on whether or not the Otterbox Defender Pro works with this? Trying to find a case BEFORE purchasing.
Dont have that case yet
UAG Monarch works perfectly with the whitestone. Tried out the Plasma series and it works as well! Just that I own the Monarch, have been using it for 1 month, dropped it a couple of times, doesn't push the glass. Stay away from Spigen, went down to a shop and tried them on, edges of the glass are REALLY close to the case lip. Too close for comfort.
Yes. it works
So excited to get and install my Whitestone Dome glass on my Note 20 Ultra...then opened box to find BOTH screen protectors shattered 😭. Finding that Whitestone support is crap. They don't reply to emails nor have a phone number to call them. May have a great product but I'd support is lacking then just not worth the time or money 💰
Does anyone else have issues with the fingerprint sensor not working with Whitestone Dome?? I've deleted my old fingerprints and increased my screen sensitivity and my Note20 Ultra still can't register my prints. 😫😫
Installation for this screen protector is so hit or miss. I followed the instructions EXACTLY as printed and watched three different videos and there wasn't enough adhesive that came out of the black tube to reach one of my phones corners (waited the full 80 seconds). This was on a totally flat surface and the adhesive bubble was perfectly centered under the guide when I removed the tab.
So I tried to press down to get the adhesive to that corner and it created micro bubbles that are impossible to remove. And I also notice the screen protector moves a lot vertically when on the phone when the adhesive isn't cured. The clear plastic guide has TERRIBLE tolerances and the two triangle guide protrusions to center the screen protector vertically located on the top and bottom of the top guide when the top guide is securely fitted to the bottom guide. These poor tolerances allow the screen protector to go under the triangle tabs and move vertically.
I also noticed that the screen protector edges aren't curved enough to properly fit my Note 20 Ultra and are slightly "lifted" from the edges of the phone. Overall I cannot believe I spent $65 on something that his this shoddy of an installation procedure. Almost want to rip it off and throw it away. You always learn that more expensive doesn't always equal better.
Sorry to hear that. I have mine on my note 20 ultra and it's still solid. I havr a cheaper alternative coming this week. So stay tuned. I have installed them before too and they are really good
I've used it on the note 9, 10 plus and 20 ultra and never had an issue with the adhesive.
When youre not carefull install, glue inside your speaker and boom! Magic happens
Yeah I think that happened to me with my Note 10 plus because my speaker was crackling a little bit and for a long time I'm thinking they gave me a defective unit but then after installing another one of these screen protectors that's when I thought oh man I probably got glue in it hahaha
Is amfilm any good
This screen protector is garbage. Had it way back on my S10+ for less than 1 week. The adhesive from the side will eventually start to collect dust and the fingerprint sensor is a hit or miss. Definitely not worth it for $95.
you probably didn't install in correctly. I had mine on my galaxy 9 plus for 2+ years and the adhesive never came off.the only time it started lifting was when i dropped it and it cracked then it was downhill from there but it at least lasted 2 years
ive done this three times now and i swear im doing it perfectly but it always messes up. Tried to contact support since they have a life time warrenty and because they cost more than any other screen protector. They wont even respond. I dont care how good they are if you install correctly i wont reccommend a company with support like that to anyone.
What about when you want to remove it? Removing the adhesive will damage the screen
No it doesn't damage the screen. It may be annoying to get off, but you can do it without any damage.
I have been reading very mixed reviews about not just the main screen protector, but also the camera protector. Have you tested it with flash since this install and how have both protectors held up? Other question would be if you've had to deal with whitestone customer service and if so, how was your experience?
Have read they are really unresponsive 😕
It seems like this is the best option out there for glass screen protector for the note 20 ultra, all others seem to cause the fingerprint sensor function to be completely useless. But with the whitestone it seems very hit or miss if the protector/camera function/customer service are going to be good. If anybody else wants to chime in after having had either or both of the screen protectors for a while now, that would be great as well!
**Edit: and if someone has experience in removing the screen protector, any insight or tips/tricks are appreciated because the prospect of possibly having to take something glued on with UV glue back off of my phone screen, is giving me anxiety. The application process is too, don't get me wrong! 🤣
I have the protectors on all out phones and the kids too. No issues. On the Marra lenses side. I had it on my phone and just took it off. I never have issues with my lense cracking or scratch. But I did take pics with it on and didn't see any issues but I rarely use flash
I have a removal video as well. My oldest is hard on phones I have replaced his screen protector many times with no phone issues
I have a removal video as well. My oldest is hard on phones I have replaced his screen protector many times with no phone issues
Does the dome glass fit with the speck perfect clear case ?
I was worried about my case working with this screen protector also. Im happy to say that my otterbox had no issues! Not sure about the speck cases though
Do you wipe the alcohol pad against the edge of the dome glass? Last time I tried that it started to remove the adhesive from underneath the screen
Yes, wipe it with alcohol pad , but gently. However, I did the UV light curing more thoroughly than what's shown. I used my fingernail edge to very gently run along the edge where i had 1 or 2 small glue excess spots. don't apply pressure while doing this. Just follow the edge where the spots are at until they dissolve . excess alcohol or pressure, ( especially before its had some curing may cause issues .)
Can this ever be removed?