I’ve been watching your vids a lot. I think you are going to be an influence why I am going to buy a nitro RC car!! I have an electric slash 1/10one, there’s something about having an engine screaming down the road that is just amusing to me. I have always been into RC when I was younger my uncle had a Jado 3.3 and he was ripping it down the road one afternoon, and he had it pinned and the next thing you know he went off the road and there was a brick sitting there, and he ended up, smashing the whole entire front end of the jato. Was some good times 😂😂 I think I may get a tmaxx or a revo.
Great video! The Revo 3.3 is really the most all around perfect nitro rc car! So easy to work with, tune, and drive! The perfect beginner nitro car, but also so much fun for more experienced nitro drivers!
@@brandenbreen2667 lol!! NitroGang bro! Got you! hope you out there running nitros too and making them great again. This is the one I had a forward only conversion installed in btw.
@@hybrid32494 hey man, Ofc bro currently giving my Optimus gp DHK a carb clean and buying new o rings for it as it needs replacing every few years. Nitrogang
The Revo 3.3 will always have a place in my heart as it was not only my first foray back into the RC world, but also my first nitro! And with a dash of Gods Grace I was able to take an old 2.5 Revo that I’d bought off of Craigslist, yep, and power up to the 3.3, do a more or less proper break in (my first so give me some leniency) and it ran and ran. Never had any problems with it. All I can say is that I actually did use Traxxas fuel, and OS Lc3 glow plugs. And it never failed me. Got the extended chassis, then began to upgrade every part that I could afford to. And she never let me down until I did something stupid while I still had the reverse in it, and it was acting up. So panicking I for some reason kept switching it to fwd, reverse, and over and over again (?) can’t say what made me do it, but eventually it stripped out the main drive gear. So I converted it to fwd only, and right back in the saddle! Love the Revo!! All Hail the great Revo!!
hey my dude! Im glad to hear you're working on this great truck, it's ben out for 20 years and it's still making me happy!! Good luck to you bro, and let's hope the nitros never die.
hey buddy! great question. In general the forward only conversion greatly reduces the rotating mass of the trans by eliminating lots of the extra hardware from the reverse system. You also can eliminate the shift servo to simplify the system. Its really a matter of time until the reverse fails unfortunately. When it does, then just go forward only.
you're not incorrect bro!! I agree. The stock 3.3 carb tends to load up and has less crispy responses than a nice OS carb. Maybe one day I will get one, hanks!
Hey Nitro, crazy man, you do great vedios, always entertainment ,, I had a 3.3 Revo years,ago, when they,first,came out, great,truck, I got a losi 5b, New in the box , bought from DDM, back in 2020, 749.00 bucks, thought needed,a spare, lol, i got, a losi 5b, all complete, had,scence 019, got OBR signature engine 34cc stroker, and a reed case, needs piston, 5 grand in that, lol, never raced it on a track, just a basher, my question how do sell all my rc,stuff im 67, got disabled , and have a 990 serpent nitro, and 989 serpent Tiapan electric ,, both,run, im in AZ
hey my dude! Thanks for checking out this video! Revo RON is here! IT definitely sounds like you have gotten a terrific collection over the years! The best way so sell is to list on FB marketplace or eBay. also many People post some of there models in the NitroGang Facebook group, I highly suggest you do that and join if you're not already a member. Here is a link for you, I'm the admin. facebook.com/groups/410417583518109
Thanks for Reply, and info, see if i can,get,rid of some of my RC, machines ,, , you,keep up the great Vedioes , always a trip, lol, keep smelling the Nitro, ,,!!!
hey my friend! I really recommend you pick up a new traxxas nitro, they are the easiest to run and work on, with tons of parts support. Check out the links to some in this video, you cannot go wrong with the trraxas nitros.
I must have bought the worst Revo in Australia. I had no luck. No compression. Balls fell out of the bearings. Air leaks. RX Battery was dead. Kept flipping over all the time. I’ll have to get a better one some time
@@jaciel85 yes it was the oldest Revo 2.5 and it was well used, i probably should have done a full strip and rebuild and changed engine. I don’t find them intuitive like buggies. Just looking at it I couldn’t figure out how to change mesh and lock it in position
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
Nitro Gang Approved!
The Revo 3.3 is my favorite nitro Truck it is a Bashing Beast !!! Love mine !!!
Thanks bro! Gotta love the Revo 3.3. In fact it's the only truck left on the market with reverse from the factory.
My man willing to stand against the hoardes of Electric RC bros RESPECT
Thank you man! Im glad you’re seeing my nitro reality! They can keep their 6s, ill stick to the sickening nitros!!
Respect 🙏
A very unique and strong design can't go wrong with a nitro revo.
100% true bro!! The Revo has been out there running rich & Loud for about 20 years now, and it's still a DOPE truck!. thanks!
Red looks good
I agree man! One of the best colors, my next choice would be the green one.
Anoth r r nitro einter st its best! Siiickneess!😎
thanks bro! Yes, I will never live a day without tuning 2-3 Revos! This one is stock, other than a highly useful forward only conversion.
Awesome. Hauling the mail.
I’ve been watching your vids a lot. I think you are going to be an influence why I am going to buy a nitro RC car!! I have an electric slash 1/10one, there’s something about having an engine screaming down the road that is just amusing to me. I have always been into RC when I was younger my uncle had a Jado 3.3 and he was ripping it down the road one afternoon, and he had it pinned and the next thing you know he went off the road and there was a brick sitting there, and he ended up, smashing the whole entire front end of the jato. Was some good times 😂😂 I think I may get a tmaxx or a revo.
I Love this car.....
Ohhhhh this is the main big boy that never left my fleet 👊😎
Nitro for ever 🤘☺️👍👍
I’ve had most every nitro monster truck, and the Revo 3.3 is definitely one of my favorites!
thank you for checking out this video dude!! Im glad to have a fellow REVO 3.3 supporter here!
I need to get my revo going
hey bro! I got your e-mails, I will take a look. IF you need any nitro help, you've come to the right place.
That big slide the Revo took under your Prius is why you should leave the body on the Revo when driving !!!!!!
Great video! The Revo 3.3 is really the most all around perfect nitro rc car! So easy to work with, tune, and drive! The perfect beginner nitro car, but also so much fun for more experienced nitro drivers!
What’s up revo Ron!
Jeremy!!! 🤣🤣🤣. Hey bro
@@hybrid32494 oh my bad revo Jeremy! How could I forget lmao 🤣
@@brandenbreen2667 lol!! NitroGang bro! Got you! hope you out there running nitros too and making them great again. This is the one I had a forward only conversion installed in btw.
@@hybrid32494 hey man, Ofc bro currently giving my Optimus gp DHK a carb clean and buying new o rings for it as it needs replacing every few years. Nitrogang
Excellent video bro! Kickin up dirt, crushing electric cars, (hilarious!) and ohh that gear shift is so prominent with that truck! Whole lotta love!!!
The Revo 3.3 will always have a place in my heart as it was not only my first foray back into the RC world, but also my first nitro! And with a dash of Gods Grace I was able to take an old 2.5 Revo that I’d bought off of Craigslist, yep, and power up to the 3.3, do a more or less proper break in (my first so give me some leniency) and it ran and ran. Never had any problems with it. All I can say is that I actually did use Traxxas fuel, and OS Lc3 glow plugs. And it never failed me. Got the extended chassis, then began to upgrade every part that I could afford to. And she never let me down until I did something stupid while I still had the reverse in it, and it was acting up. So panicking I for some reason kept switching it to fwd, reverse, and over and over again (?) can’t say what made me do it, but eventually it stripped out the main drive gear. So I converted it to fwd only, and right back in the saddle! Love the Revo!! All Hail the great Revo!!
As always: Great running video!
thank you man! Really appreciate you as a viewer and your support..
Revo Ron 😂😂 good one man.. Sick truck
Really good
To see this D mine is on
The way as we speak 👍👍👍
Perfect timing!!! I'm currently doing a refresh of this exact truck, it has lots of RD Logics hop-ups from years ago.... Awesome trucks!!!
hey my dude! Im glad to hear you're working on this great truck, it's ben out for 20 years and it's still making me happy!! Good luck to you bro, and let's hope the nitros never die.
You put out a lot of videos today and I'm finally all caught up It's 1:30 in the morning
What are the benefits of forward only conversion??
hey buddy! great question. In general the forward only conversion greatly reduces the rotating mass of the trans by eliminating lots of the extra hardware from the reverse system. You also can eliminate the shift servo to simplify the system. Its really a matter of time until the reverse fails unfortunately. When it does, then just go forward only.
@hybrid32494 Thank You!!!!
Put an O.S. 11 KR on it and that’s all you frickin need 😈
you're not incorrect bro!! I agree. The stock 3.3 carb tends to load up and has less crispy responses than a nice OS carb. Maybe one day I will get one, hanks!
Revo ROD Jeremy. 😂😂😂😂😂 yesssss
Pleasure to meet you bro! First Name Revo, Last Name RON!!
nice i love nitro
awesome rc and cool run
Thank you man!
Nice it's great
Awesome running video. I cannot wait for the weather to break so we can run our nitro rc's again
Love my revo just can't get it to go full throttle!
cooooool
thanks my dude!! Nitro Gang!.
Wow great run with the revo hybrid! The savage still wanted to rip even with 3 wheels!
You probably say it all the time but what park is this?
Hey Nitro, crazy man, you do great vedios, always entertainment ,, I had a 3.3 Revo years,ago, when they,first,came out, great,truck, I got a losi 5b, New in the box , bought from DDM, back in 2020, 749.00 bucks, thought needed,a spare, lol, i got, a losi 5b, all complete, had,scence 019, got OBR signature engine 34cc stroker, and a reed case, needs piston, 5 grand in that, lol, never raced it on a track, just a basher, my question how do sell all my rc,stuff im 67, got disabled , and have a 990 serpent nitro, and 989 serpent Tiapan electric ,, both,run, im in AZ
hey my dude! Thanks for checking out this video! Revo RON is here! IT definitely sounds like you have gotten a terrific collection over the years! The best way so sell is to list on FB marketplace or eBay. also many People post some of there models in the NitroGang Facebook group, I highly suggest you do that and join if you're not already a member. Here is a link for you, I'm the admin. facebook.com/groups/410417583518109
Thanks for Reply, and info, see if i can,get,rid of some of my RC, machines ,, , you,keep up the great Vedioes , always a trip, lol, keep smelling the Nitro, ,,!!!
I really wanna get into nitro where should I start
hey my friend! I really recommend you pick up a new traxxas nitro, they are the easiest to run and work on, with tons of parts support. Check out the links to some in this video, you cannot go wrong with the trraxas nitros.
@@hybrid32494 thank you I’ll do that
Hhhahaaaaaaaaaaaaaa he driving a savage with 3 wheels now that’s funny 😂
❤🎉😮😊. ไฟไฟไฟ แอดพ์
Dat guitar made me laugh.. :)
I must have bought the worst Revo in Australia. I had no luck. No compression. Balls fell out of the bearings. Air leaks. RX Battery was dead. Kept flipping over all the time. I’ll have to get a better one some time
Sounds like you got a used one…always best to rebuild when getting a used nitro rc, specially when it hasn’t ran in years
@@jaciel85 yes it was the oldest Revo 2.5 and it was well used, i probably should have done a full strip and rebuild and changed engine. I don’t find them intuitive like buggies. Just looking at it I couldn’t figure out how to change mesh and lock it in position