How To ReKey Schlage BE 365 Push Button Deadbolt Master Key Optional
HTML-код
- Опубликовано: 27 авг 2024
- How To ReKey Schlage BE 365 Push Button Deadbolt Master Key Optional. Schlage pushbutton deadbolt lock. Manual Key overide.
Please Click The Subscribe Button Below And Share Video With G+, Facebook, Twitter and all Your Favorite Social Media!
Comments and questions are encouraged but please be respectful.
Visit wayneslockshop.... For More tips and tricks for the Locksmith Industry
tricountylocksm...
All views and opinions are the alleged interaction with any product shown and not a fact stated by Wayne Winton and or Tri County Locksmith Service. The information shown in any video is 100% opinion of Wayne Winton and protected by the 1st amendment, the freedom of speech. Some products may be provided by the company being reviewed and others are purchased independently by Wayne Winton, Tri County Locksmith Service. Either way it does not reflect the content of the review. All products are given a fair equal chance to perform. All videos are property of Wayne Winton and all rights are reserved. If you would like to post any video please contact Wayne Winton at: Tricountylocksmithservice@gmail.com for permission.
Disclaimer: Do not try this at home! Any content seen here is for entertainment only! Do Not try anything seen here yourself or there may be danger of bodily harm or legal consequences for your actions! Any illegal activity is prohibited and Wayne Winton and or Tri County Locksmith Service are not responsible for your actions!
Wayne Winton, © 2014. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Wayne Winton. Please note that Wayne Winton, Tri County Locksmith Service does not state any confirmed facts only personal opinions. I am not directly affiliated with any of the vendors or manufacturers in this video. Wayne Winton, Tri County Locksmith Service is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the Wayne Winton, Tri County Locksmith Service film series broadcast on RUclips is intended for entertainment purposes only.
Tri County Locksmith Service
1338 Grand Ave
Glenwood Springs
Colorado
81601
970-945-5625 970-963-5625 970-922-5625
Man...I wrestled with this lock over 30 minutes (customer didn't have a key so once I took it apart and rekeyed it I had to figure out the key override part). Good stuff!
So how did you take it apart without a key? You lockpicked it?
Thank you! Saved me. I am grateful for your post!
Thanks for the video! What is the tool you used to slide the cylinder out of the housing at 4 minutes in to the video?
I'm not a pro and you probably figured it out by now, but it's called a follower. It's just a cylinder tube, it's purpose is to keep the spring loaded top pins in place when you remove the inner key slot cylinder plug. Look up some more detailed videos on "Rekey Schlage Deadbolt Locks", the disassembly is different, but once you get the cylinder out it's pretty standard stuff.
definitely helped me out thank you.
Try cutting the 1st pin upper chamber out. You will lose the 1st pin but you can use a 6 pin key in it. The cylinder will stick out a little and setup your system so the 1st pin is less crucial
Can you use a schlage Everest c123 core with the keyless door knob by schlage?
Good stuff as always. Where have you gone? Busy, sick, off the grid?
How do I rekey this wothout the key? I know I need a blank and a shim...Ive shimmed several locks but the shim always seems to get stuck for the electronic deadbolt...is there something Im missing that normal locks dont have?
Visit wayneslockshop.com/ for more information Tips and Education
Perfect!!! Thank you
Can I take the key part to a locksmith to rekey
good video, Schlage though is not so; Papa Gleb brings up a good point about Schlage locks...they are weak in too many areas.
Point well made sir. I was mainly asking to find out if I do cut it off will I have easy access to the internals or are their shielded somehow to prevent such an attack?
once off pretty easy. this lock is being replaced by the BE 375 I reviewed
Can you use any Sledge key to rekey the lock?
Just gonna go to home depot and get new keys made up
Was the original key necessary for this process? Couldn't really tell. You did put it in, but can you get to the pins without it? (I don't have the master on a house just purchased with 3 of these locks and NO keys, just the electronic codes.
Did you ever sort this out? I'm in a similar situation.
@@sethmestreet I just re-keyed my lock and you can't do this without the original key
@@Gandor66 Thanks for replying. What I ended up doing was replacing the center lock part only (piece with tumbler and pins) since it was the same part as other schlage deadbolts. Ended up being cheaper / quicker than having a new key made or shimming the pins to open it up.
@@Gandor66 bs you can but it is more work
Which Torq size# is used to open this lock? I tried 7 and 8 already
10
I just used a T15 on mine, same model number.
@@kirkpollard5319 Thanks Bro.
I might have missed it but that knob looks like I can hack saw it off with the cylinder.
Sure you could but do you think that requires any less effort to drill your average lock? same effort same result. I didn't say I like it I'm just showing how to re key it
Can I rekey without the original key?
The bible won't open.
So i can't change the pins
Thanks for the videos. Question. I bought a Schlage encode is it possible to render the key portion inoperable until I can get a multi T cylinder and still have the electronic part work. Trying to make it harder to of pick and bump.
Still tripping same lock it sits hella deep also not engaging also no key have to get whole lock or just pop top and drop pins in.
Stupid is what I call it the nose twisting like that thought the crap was broken still not sure but mine spins too 🤣🙈
Good stuff as always. Where have you gone? Busy , sick, off the grid ?