Keep on putting up these great videos Kevin - I have a "new" Office Jet Pro 8135e ....... hard to find info on this - printhead "removal" seems really tricky until this video - I might give it a go.
My first ever printer has been fixed with this method, i was thinking to clean it by something else, but the warm water did the job done without any headaches. Thank you Bilal bro. It was a great and informative video. Can you also tell if we can fill these cartridges after they are used ? and if so a video will be great on this also.
Bought a HP OfficeJet Pro 9025 from Office Max (Floor Model). It first told me that the color cartridges were incompatible. Replaced those 3 with new cartridges, updated the firmware and now it's telling me there is a problem with the supply system and notes the K (Black cartridge) is the problem. I put a brand new one in and it's telling them the same thing. I could see the old one had plenty of ink when I first turned it on. Have removed the printhead several times to see if I could see any issues but alas - no. I don't have an old Epson to pull off a tube to inject water....what else can I use?
Thank you! This should help me out a lot! My paper feed gear broke, and it took my awhile to finally fix it. (Had to take the whole printer apart) By then all the ink was shot. I am about to clean it now. I will let you know if it works here in a minute. Here's one for the Technological Blogger!
I’m letting the head dry out right now. I dried it mostly with q-tips and paper towel. The black wasn’t working at all, but I was able to get a bunch to squirt out.
I tried it and the printer said that one of the ink cartridges wasn’t working and needed to be replaced. It’s the blue one and that was working fine originally. Could there still be water inside? I have a fan on it now, and will try again later.
Why would the blue not work? It says there is a problem with the supply system. Try replacing the affected cartridge with a different non-empty, cartridge. It message reappears again, record message and contact support. The problem cartridge is the cyan one. 🤷♂️ it was working fine before I cleaned the clogged black with water.
![ROSÉ (로제) - number one girl [더 시즌즈-이영지의 레인보우] | KBS 241129 방송](http://i.ytimg.com/vi/A9oByH9Ci24/mqdefault.jpg)
Keep on putting up these great videos Kevin - I have a "new" Office Jet Pro 8135e ....... hard to find info on this - printhead "removal" seems really tricky until this video - I might give it a go.
Was a good Video now i know how to clean my printer thx
how can i clean the printerhead if i cant't remove ist? I use the Printer HP Officejet 8012.
My hp office jetpro 8020 series printer not printing, blank paper coming out, ink is full, give some solution
Clean printhead
@@BilalKhalid already done, still not working
What is the size of the tubing that you used? I want to try this on my printer. Thank you,
Please my hp printer 8023 shows cartridge problem (yellow). Is my print head clogged
No, just change yellow
This worked like a charm. Thank you!!
Glad it helped!
My first ever printer has been fixed with this method, i was thinking to clean it by something else, but the warm water did the job done without any headaches. Thank you Bilal bro. It was a great and informative video. Can you also tell if we can fill these cartridges after they are used ? and if so a video will be great on this also.
Glad it helped
@@BilalKhalid Can we refill those cartridges before they are completely depleted ?
Worked perfectly! Thanks!
Glad it helped!
Hi, what's the diameter of the soft tube I should buy? Thanks!
Take the pipe from any old epson ink tank printer
GREAT VIDEO!! WORKED FOR ME
great video, I will try this right now and report my outcome
Is it possible to clean with water and not to get stuck
Yes
Bought a HP OfficeJet Pro 9025 from Office Max (Floor Model). It first told me that the color cartridges were incompatible. Replaced those 3 with new cartridges, updated the firmware and now it's telling me there is a problem with the supply system and notes the K (Black cartridge) is the problem. I put a brand new one in and it's telling them the same thing. I could see the old one had plenty of ink when I first turned it on. Have removed the printhead several times to see if I could see any issues but alas - no. I don't have an old Epson to pull off a tube to inject water....what else can I use?
Great Video!
Thank you! This should help me out a lot! My paper feed gear broke, and it took my awhile to finally fix it. (Had to take the whole printer apart) By then all the ink was shot. I am about to clean it now. I will let you know if it works here in a minute. Here's one for the Technological Blogger!
All the best
I’m letting the head dry out right now. I dried it mostly with q-tips and paper towel. The black wasn’t working at all, but I was able to get a bunch to squirt out.
Hopefully it’ll
Work
I tried it and the printer said that one of the ink cartridges wasn’t working and needed to be replaced. It’s the blue one and that was working fine originally. Could there still be water inside? I have a fan on it now, and will try again later.
Why would the blue not work? It says there is a problem with the supply system. Try replacing the affected cartridge with a different non-empty, cartridge. It message reappears again, record message and contact support. The problem cartridge is the cyan one. 🤷♂️ it was working fine before I cleaned the clogged black with water.
PERFECT THANK YOU!!! ❤
How to open this printer?
Very helpful, thank you!
Thanks tried it but still not working 🥲
I think it is time to buy a new printing head 😕