Valve springs on the hammer is a brilliant modification so much better than side loading a coil spring. You could get more Stroke by just simply moving the actuator back toward the hinge
Hi, I'm Brazilian, and I really liked your project. It's a beautiful job. The shaft that turns to pull the hammer is either stuck or has some bearing inside it.
That's brilliant, and the simplest and easiest design I've seen yet... thx!
Might want to consider a shield over the drill vent holes, any metal flakes that get in there will make easy work of shorting it out.
Valve springs on the hammer is a brilliant modification so much better than side loading a coil spring. You could get more Stroke by just simply moving the actuator back toward the hinge
Great job on that hammer, and better job on playing that real music in the background 👍
Yea definatly need to revisit your design....nice job putting it together. Looks really good
I like it. Needs a bigger cam and different springs for a longer stroke.
I like it.It makes me think about making a forge and starting up again.🤔
Awesome, I'm building one atm and I think my plans are gonna change a little bit lol
Bellísimo trabajo. Hecho con pocos recursos pero mucha inteligencia e inventiva. Te felicito.
Cool tool brother! Working on my own design at min using lot of ideas from clips such as yours ! Peace
Good ...
Suport n sucses.... My frend
wow that hammer is almost a waste of time. hits as hard as a toddler would.
Like that motor. I dont have one so im using a modified 4x4 motor
At this point ive built one using this design. Need to tighten the belt but otherwise, not bad
Tell me you’ve built a real boy power hammer since this one ☝🏼 🤔🤷🏻♂️
Very Good!.
Looks great. Simple is best.
Hi, I'm Brazilian, and I really liked your project. It's a beautiful job. The shaft that turns to pull the hammer is either stuck or has some bearing inside it.
there is no way that soft hit is going to move any metal. My 6 year old son strikes harder than that
Maf apakah pukulannya bisa diperlambat?
Stroke is too short.
Yes you are correct. I am modifying the hammer to increase the stroke. It really doesn't hit hard enough.
0 to 60 in three inches.
@@soylientgreen5663 is that's what she said.... lol
Where's the DaVinci cam?
shouldn't the cam be spiral shaped?
is the slap hard?
Слабовато бьёт но за конструкцию 👍
Самодельщик, а что нужно сделать в етой конструкции, чтоб посильней било? спасибо за ответ.
Apakah putaran atau pukulannya d perlambat?
Show the procces and show a project using it
Nice
Jose altuna baldeon
good job.
หาซื้อที่ใหน
Nice machine
Are you sure you built that right? That's not hitting hard enough to move hardly any metal. better off by hand.
Page76 Metalcraft I was thinking the same thing
I think he said it was a 6 lb hammer, i agree needs a bigger sledge.
Wouldn't a longer stroke help as well as a bigger hammer?
I don't think the metal was hot enough.
Как по звизде ладошкой)))
na orechy stačí :)
Need to clean camera .
👍👍👍👍
Nuh
Sweet.
блин , даже в коментах ни слова по русски
класс
To low
Nice