Or extend the front 8" and don't carry the garbage behind while you drive it everywhere. But slicks, long swing and short wheelie bar would make this a micro monster!
Honestly I love the direction that this channel has gone you guys are the same exact people in the same exact content from 5 years ago when I started watching no need for clickbait or any drama simple wholesome videos with some good laughs and awesome people ❤️👌
Build a wheelie bar for it that just saves you from flipping over but still allows you get past the initial power hit. That thing could be so much fun! Looking forward to the new build!
Yeeee Hawww! Put some wheelie bars on that thang!!! Don't need wheels on em tho but some kinda skid plate that can be swapped with a new ones, perhaps make the skid plates out of hard wood... Thumbs up! 👍🏼
I love it! Some suggestions to keep the front end down are to fill the front tires with washer fluid or beat juice and fill some kind of container with lead BBs and stuff it up front in the nose of the frame. I think if you guys get the chassis dialed in where it's nice and drivable, then strongly consider engine mods.
I have been watching ALL of your videos for years now... wheelie bar now, right F`n now!!! All I have to say lol... don`t want you guys to ever leave because of a head injury!
Extend out the foot platforms, build a heat shield out of sheet metal lined with heat barrier , raise handle bars , build a seat support a bit higher up. Will be one cool little funky ride for meet n greets.
If guys with big trucks are compensating for something 😂🤣😂 what does that mean for you two driving little go carts? Fyi boosted boiz stole your "it'll be fine" line and put it one a shirt! You should have a go cart race with them to settle it!
& boosted Boiz also have a bad ass shopping cart go cart I'm sure they be down 4 a race if u wana call them out...& fyi their channel is far from weak always a hater in the mix some were dam.....✌
Got the same quad at home, picked it up for nothing and got a new stock engine for it cheap. Wanted to go bigger but knew it needed a new frame to house something bigger then the 50cc. Saving this for when I get around to modding it.
Love it!!! I would go with racing slicks & most likely deep dish rims. With the setup it looks like it would make a good dragster type. Maybe tac a detachable wheelie bar. Just an idea... Why does Ike look like Magilla Gorilla on that mini $ wheeler? LOL jokes bro! Love the old school content Keep it going guys! This is what made me a fan a year ago
I love it,, looks alot like a mini banshee I know this video is a year old but just looking back at y'all's older builds I realized that you guys have had some pretty cool builds
I ride wheelies for miles yz250f and watching you pop a wheelie on that little quad and fall off really makes me chuckle😅 keep up the excellent work guys
My nephew has one of them, 49cc 2 stroke #25 chain all original and it is fast, for a kid. I told you about it in a previous post. We found it in a trunk of a car at the local junkyard.
Great to see this kind of videos. I suggest to you to make that little beast just a little bit longer. That way you'll get a little bit more space and it won't wheelie so hard.
Maybe a wheelie bar suspension kind of thing so it can have good tractuon on take off but still be able to hug the ground as you go off road. That is one of the best things you guys have done.
Keep the header! One of the best exhausts y’all have done and have no idea why I like it so much. Just make a heat shield. And extend out the rear end so y’all can actually sit on it and go forwards.
this thing is absolutely wild! cant wait to see what it weighs in at. if you do decide to paint it, for whatever reason, i think the original flat white on orange with the blue engine cover looks REALLY cool. very retro. maybe even throw a yellow numberplate on it
I had one of these! Slightly different design though, it had "suspension" (single pivot swing arm front and rear). It had a 50cc 2 stroke engine, and would do wheelies with some prompting. I ended up stretching it by two feet, installing lights and a sound system, and a rack for a cooler. It lasted exactly ten minutes in that state before the clutch exploded.
Build a custom handlebar riser setup and maybe a sprocket skid plate. And who knows you might be able to squeeze a set of old huffy handlebars onto it. Keep up the good work👍👍
Please more of these it just like old times..... I have two in the shed both have suspension all round. Single in the rear and single a arm fronts been wondering what to do with them for ages....😎
I think the slicks would look nice on that wheeler the ride on the other hand... Be careful looks like fun though looking for the top speed run, a lap time results soon take care!!!!
I recently bought a used ATF 50cc the frame is the same size is yours and since I bought it for my grandson I noticed when I looked at it the front tires are 20x8 x7 and back are 16x9.85 x8 and the guy told me he bought it with the front fenders cut off only leaving the start of the fenders and the center that covers the headlights and gas tank. The rear fenders are gone too. He couldn’t get it to start and the bowl of the carb was wet he through in a new carb with auto choke. I took it home changed the carb and noticed the one I took off was a Mikuni and I put the new made in Japan carb on taking his word. Then when he was trying to turn ignition on it was turning but was hard to turn on so I unplugged it and seen it was a 6 wire ignition with a male plug I just bought one 6 wire female plug since with a new plug I wasn’t getting spark. The ignition switch had the red and blue wire disconnected so I bought a new one. I took the seat off and dig out some wiring and first of all the guy told me it was a 50cc he told me it wasn’t electric start then before I left he said it might be a 90cc. When I took the seat off at home I pulled out positive and negative red and black wires and there is a tray under seat that may hold a 3” h by 2.75 deep and about 5” long and traced the red to the inside outer top to a 2.5 by 3.5” what looks like a starter. My question is the only writing on the crankcase reads HER CHE and the last letter maybe 2 are missing I’m trying to find out what is the make the crankcase is about 20” long and about 4” wide that’s the cover and it has a couple lines going across that stick out just a little part of the mold the name was on a painted silver rectangular with black writing HER CHE that’s all I can read the rest is missing! Someone tell me what make and what cc 50 or 90 he did say he had it going about 30mph. The tires are knobby but appear near no miles I paid 100 for it and if the ignition gets it going great! But if it doesn’t the tires and seat and suspension are good chain sprockets cables grips I could get much more parting it out. Please someone let me know anything about this engine. Thanks.
i watch your videos with my son who is nine he speaks of "ike and john" like we are neighbors and hang out every weekend he has a classic doodle bug with a 212 predator and a chineese 30 series torqu-a-verter we are tuned back to only thirty MPH but he reminds me every monday and wed to tune in we enjoy your videos thanks guys keep the cool toys rollin!
Hello John or Isaac, I have a question. Do you have to run higher octane gas on a predator with the gov removed, stronger valve springs, and a Mikuni? If so, should I go for 89 or 93?
Try make a LWB (long wheel base) on it. If you extent the wheelbase by maybe 6 inches to a foot then you won't be sitting right on the back wheels and you'd have more control for sure. It's look badass too
Seems like a keeper, maybe put about 1 1/2 - 2 feet in the chassis and brace it up. Give Isaac something to ride besides build tiny toys John can ride around on... I'll say though man, you wheelied as big as you can do it! Cool little project.
You guys got the smallest quad possible, holy. You guys are just crazy, that is a cobra 50cc. They are actually a pretty cool mini atv for kids, they rip with a 50 pound 5 year old on it 😆😃😉😎 this is awesome
List of parts needed: 1. Apehangers 2. wheelie bar 3. Smoothie tires 4. Exhaust wrap 5 ...a seat or at least a pool noodle wrapped around frame *FYI, pools noodles add HP*
Raise the handlebars so you can straddle them, put some foot pegs in front of the front wheels, stretch rear end a bit, leave small front wheels with bigger back wheels to shift center of gravity forward.... that should make it fun!
I wish I had the money to buy a t-shirt. As I've said many times. I love you guys man "NO HOMO" LOL Brings me back to my childhood watching your videos. . I envy you guys. Do what you love man!! My 7 year old son Luciano and my daughter Gianna who's 5 watches you guys as well. As soon as we get some extra cash would love to help by buying a shirt for me and the little guy and girl. Big time fan long time. Keep em coming guys. Roy LINY..
I think it is a good base to work from, extending the wheel base and widening it a bit will do a lot of wonders. Just putting bigger tires on it is just going to make it raise the front wheels a lot easier. It's way too short. If the rear end was extended say 3 feet with the engine just in front of the rear tires that would make it a lot more stable at least in a straight line. With some slicks it could be an interesting drag 4 wheel bike sort of? It will steer a bit better than now but not great. Only way to really do that is to widen the track by another foot or so.
Maybe try some lawn mower front tires. (15x6.5-6) those would definitely give you a wider tread to work with on each tire. Love your videos guys! Keep up the great work
This is like old school cars&cameras, I love it! GIVE US MORE!!!
What is this atv called
Nugget_of_life wait
Nugget_of_life r u being seirous no I’m mean like the actually name of it
Extend the rear end a bit to make it more fun and manageable to ride!
Jordan smith Less manageable = more fun
Yes stretch it
Triangular wheelie bar, about 3 feet long, should work. With a wheel the same size on the end. LOL
I was thinking the same thing like move the rear axle back about a ft
Or extend the front 8" and don't carry the garbage behind while you drive it everywhere. But slicks, long swing and short wheelie bar would make this a micro monster!
Extended swing arm! Drag race style
is it a swing arm if it doesn't swing?
Drag mini atv, add a wheelie bar
Honestly I love the direction that this channel has gone you guys are the same exact people in the same exact content from 5 years ago when I started watching no need for clickbait or any drama simple wholesome videos with some good laughs and awesome people ❤️👌
Agreed
6:43 making a time stamp so I can come back later
That was awesome guys! Loved the burnout!!!
Build a wheelie bar for it that just saves you from flipping over but still allows you get past the initial power hit. That thing could be so much fun! Looking forward to the new build!
Yeeee Hawww! Put some wheelie bars on that thang!!!
Don't need wheels on em tho but some kinda skid plate that can be swapped with a new ones,
perhaps make the skid plates out of hard wood...
Thumbs up! 👍🏼
on second thought, maybe not wood, they might catch fire! LOL!
I love it! Some suggestions to keep the front end down are to fill the front tires with washer fluid or beat juice and fill some kind of container with lead BBs and stuff it up front in the nose of the frame. I think if you guys get the chassis dialed in where it's nice and drivable, then strongly consider engine mods.
I see these mini 4wheelers pop up for sale all the time. Never realized how small they really are lol!
Where you buy them at
Just when I was KINDA starting to snooze on the golf cart, you pulled me back in with this!!! Awesome! And what a fun project!
Pulling a Carrol Shelby, biggest engine in the smallest vehicle.
It’s nice to see the welds get better over the time I’ve followed cars&cameras
Keep it a street quad. Big slick cart tires. Maybe extend the wheelbase?
Just like I have always said, "There is no substitute for Horsepower!" Great build Guys Keep it up! Rusty
Isaac needs to work on his rock paper scissors game.
A few months ago he had a mad rock paper scissors streak going- I guess it's just my turn!
I have been watching ALL of your videos for years now... wheelie bar now, right F`n now!!! All I have to say lol... don`t want you guys to ever leave because of a head injury!
too funny looks like you need to put a wheelie bar down low and if Ikes going to ride it maybe extend the whole frame lol
Extend out the foot platforms, build a heat shield out of sheet metal lined with heat barrier , raise handle bars , build a seat support a bit higher up. Will be one cool little funky ride for meet n greets.
If guys with big trucks are compensating for something 😂🤣😂 what does that mean for you two driving little go carts? Fyi boosted boiz stole your "it'll be fine" line and put it one a shirt! You should have a go cart race with them to settle it!
I seen that I even commented "is that a CarsandCameras shirt he's wearing?" Just to bring some light to that
@@dustinmiller7278 me too!
@Jimothy Michaelz how do they suck? and how is there channel weak?
@@themfknightrider420 he's just pissed that he can't do the sick shit they do
& boosted Boiz also have a bad ass shopping cart go cart I'm sure they be down 4 a race if u wana call them out...& fyi their channel is far from weak always a hater in the mix some were dam.....✌
Got the same quad at home, picked it up for nothing and got a new stock engine for it cheap. Wanted to go bigger but knew it needed a new frame to house something bigger then the 50cc. Saving this for when I get around to modding it.
BEST INTRO EVER
Slicks, wheelie bars, and head back to the 1/8 mile!!!!! A video of an 1/8 mile wheelie would be epic!!!!!
I love your videos, keep your good content coming!
Awesome project! When you cut the frame I was thinking, "stretch the frame and make a drag ATV!" But at least there is still room for a wheelie bar!
I love the small Chinese rocketa stuff so easy to work on and you don’t care if you break it
That's why I have a taotao 125 pitbike if it breaks new engines only 200 that's the most expensive part by far
@@dustinmiller7278 we just blew a 110 lol
@@joelboley2344 a new 125cc is between 200 and 400 depends where you get it from
Dude! I love it. Y'all should stretch it so you can really let it rip
Love it!!! I would go with racing slicks & most likely deep dish rims. With the setup it looks like it would make a good dragster type. Maybe tac a detachable wheelie bar. Just an idea... Why does Ike look like Magilla Gorilla on that mini $ wheeler? LOL jokes bro! Love the old school content Keep it going guys! This is what made me a fan a year ago
I love it,, looks alot like a mini banshee I know this video is a year old but just looking back at y'all's older builds I realized that you guys have had some pretty cool builds
Make it a stand-up! Extend the footpads out and the handlebars up
It needs front wheel fenders would look nice and keep feet from hitting the tires and mud splash on the legs
Isaac is the man ....Thanks for the video guys again......JJ....
You guys are cool as heck
I ride wheelies for miles yz250f and watching you pop a wheelie on that little quad and fall off really makes me chuckle😅 keep up the excellent work guys
I'm dead 😂 No one has done this before.
Fr😶😂
Vasily Builds big fan my man
you guys and rather B welding should go to busco beach and compare mini ATV's I would really like to see that video
Men never grow up! Keep it up guys
My nephew has one of them, 49cc 2 stroke #25 chain all original and it is fast, for a kid. I told you about it in a previous post. We found it in a trunk of a car at the local junkyard.
Keep up the good work guys, love the videos.
Great to see this kind of videos. I suggest to you to make that little beast just a little bit longer. That way you'll get a little bit more space and it won't wheelie so hard.
You guys should get a shock put on the rear end of that and then by another frame to modify and then go racing then
I like the way you introduce each video like a band starting a gig :-)
That little thing is awesome!!! Leave the Made in China sticker on it!
Maybe a wheelie bar suspension kind of thing so it can have good tractuon on take off but still be able to hug the ground as you go off road. That is one of the best things you guys have done.
I love your channel/videos, you guys are awesome, and thank you for your awesome and blessful stuff!, God bless :)
Keep the header! One of the best exhausts y’all have done and have no idea why I like it so much. Just make a heat shield. And extend out the rear end so y’all can actually sit on it and go forwards.
Nice bike
this thing is absolutely wild! cant wait to see what it weighs in at. if you do decide to paint it, for whatever reason, i think the original flat white on orange with the blue engine cover looks REALLY cool. very retro. maybe even throw a yellow numberplate on it
love your videos! Keep on doing what your doing!
FINALLY ive wanted to see something like this for a long time
You should do an extended swingarm you would bring the center of gravity closer to the front
What swingarm? 😂
That is great! love small things with big power!!! Looks like a blast to ride.
Make a wheelie bar for Safety put a skid plate instead of wheels so it shoot’s sparks...😁🤣😂
This, this so much. It needs to be a wheelie machine.
I had one of these! Slightly different design though, it had "suspension" (single pivot swing arm front and rear). It had a 50cc 2 stroke engine, and would do wheelies with some prompting.
I ended up stretching it by two feet, installing lights and a sound system, and a rack for a cooler. It lasted exactly ten minutes in that state before the clutch exploded.
Roller blade wheel wheelie bar. Or use wheels like on quad make a spring loaded tag axle with bump stops.
Build a custom handlebar riser setup and maybe a sprocket skid plate. And who knows you might be able to squeeze a set of old huffy handlebars onto it. Keep up the good work👍👍
Eyyyyyyy
Love it . You could put some kind of plate between you and the header
put pvc pipe on the tires and drift that thing ...
Please more of these it just like old times..... I have two in the shed both have suspension all round. Single in the rear and single a arm fronts been wondering what to do with them for ages....😎
Hey weld up some wheelie bars to that thing!
Wheelie bar, who pulls off the longest fastest wheelie.
Lol, before you even finished saying it I was saying Chevette
👍 for the win!
put the ducati on it. ;)
Soup Knock knock, death has come to visit you
@@randomprojectsusa5196 knock knock broken weld and bended frame came to visit you
Nice ride guys good work on the mini 4 wheeler. For a top speed on it maybe 25 to 29 MPH
You should extend the rear end so you don’t do wheelies and see what that 4 wheeler really has
I think the slicks would look nice on that wheeler the ride on the other hand... Be careful looks like fun though looking for the top speed run, a lap time results soon take care!!!!
Almost 1st, darn.
Don't bother making it longer 😁 just add a wheelie bar 😂 awesome build, really looking forward to seeing what you do next with it!
That thing is awesome!!! You need to stretch the wheel base and add slight lightly taller/wider tires in the rear! Think mini Banshee! ;)
What's better the Tillotson 212 or a stage 1 or 2 modded Predator motor what's the best bang for the buck
evil beetle tillitson
@@ogspmex9926 thanks!
I recently bought a used ATF 50cc the frame is the same size is yours and since I bought it for my grandson I noticed when I looked at it the front tires are 20x8 x7 and back are 16x9.85 x8 and the guy told me he bought it with the front fenders cut off only leaving the start of the fenders and the center that covers the headlights and gas tank. The rear fenders are gone too. He couldn’t get it to start and the bowl of the carb was wet he through in a new carb with auto choke. I took it home changed the carb and noticed the one I took off was a Mikuni and I put the new made in Japan carb on taking his word. Then when he was trying to turn ignition on it was turning but was hard to turn on so I unplugged it and seen it was a 6 wire ignition with a male plug I just bought one 6 wire female plug since with a new plug I wasn’t getting spark. The ignition switch had the red and blue wire disconnected so I bought a new one. I took the seat off and dig out some wiring and first of all the guy told me it was a 50cc he told me it wasn’t electric start then before I left he said it might be a 90cc. When I took the seat off at home I pulled out positive and negative red and black wires and there is a tray under seat that may hold a 3” h by 2.75 deep and about 5” long and traced the red to the inside outer top to a 2.5 by 3.5” what looks like a starter. My question is the only writing on the crankcase reads HER CHE and the last letter maybe 2 are missing I’m trying to find out what is the make the crankcase is about 20” long and about 4” wide that’s the cover and it has a couple lines going across that stick out just a little part of the mold the name was on a painted silver rectangular with black writing HER CHE that’s all I can read the rest is missing! Someone tell me what make and what cc 50 or 90 he did say he had it going about 30mph. The tires are knobby but appear near no miles I paid 100 for it and if the ignition gets it going great! But if it doesn’t the tires and seat and suspension are good chain sprockets cables grips I could get much more parting it out. Please someone let me know anything about this engine. Thanks.
i watch your videos with my son who is nine he speaks of "ike and john" like we are neighbors and hang out every weekend he has a classic doodle bug with a 212 predator and a chineese 30 series torqu-a-verter we are tuned back to only thirty MPH but he reminds me every monday and wed to tune in we enjoy your videos thanks guys keep the cool toys rollin!
14:22 "this is like puting a 572 in a chevette"
My dad has a '76 chevette...lol
Hello John or Isaac, I have a question.
Do you have to run higher octane gas on a predator with the gov removed, stronger valve springs, and a Mikuni?
If so, should I go for 89 or 93?
Another great video fellas. Thank you!
To get rid of the wheelie try to make it a dragster extending the back or put a wheelie bar on it
Extending it and widening it would make it a lot better project, also a bit more interesting.
Great little Quad. You guys should stretch it out and make it a couple feet longer, like a drag quad.
Try make a LWB (long wheel base) on it. If you extent the wheelbase by maybe 6 inches to a foot then you won't be sitting right on the back wheels and you'd have more control for sure. It's look badass too
Love this little thing! Maybe move the rear axle back 6" or so. Would make it a little more stable
Miss these kinds of videos
Seems like a keeper, maybe put about 1 1/2 - 2 feet in the chassis and brace it up. Give Isaac something to ride besides build tiny toys John can ride around on... I'll say though man, you wheelied as big as you can do it! Cool little project.
Easily the coolest project ever
Wheelie bar with tungsten carbide plates and a set of drag slicks. It will be a wheelie, spark throwing machine!!
Make the handlebars stick up higher, bigger tires, & maybe wheelie bars ? KOOL LITTLE MACHINE, DON'T GET HURT GUY'S.
Chevette,there's a car I haven't heard of in a long time!!
You guys got the smallest quad possible, holy. You guys are just crazy, that is a cobra 50cc. They are actually a pretty cool mini atv for kids, they rip with a 50 pound 5 year old on it 😆😃😉😎 this is awesome
List of parts needed:
1. Apehangers
2. wheelie bar
3. Smoothie tires
4. Exhaust wrap
5 ...a seat or at least a pool noodle wrapped around frame
*FYI, pools noodles add HP*
And the 20 dollar auto zone fart cannon special, adds at least 5hp.
Ya could build a sled pull set up with counterweights for optimal performance haha
U should extend the rear like a big drag atv. It would look sick and cute. Plus not as bad of wheelies.
Paint the mini wheeler red white and blue. Call it the Freedom demon or Freedemon. Love the videos!
I loved this video you guys should do more mini builds like this
I love this build. You guys should make it a dragster
Wheelie bar is a must.
Raise the handlebars so you can straddle them, put some foot pegs in front of the front wheels, stretch rear end a bit, leave small front wheels with bigger back wheels to shift center of gravity forward.... that should make it fun!
I wish I had the money to buy a t-shirt. As I've said many times. I love you guys man "NO HOMO" LOL Brings me back to my childhood watching your videos. . I envy you guys. Do what you love man!! My 7 year old son Luciano and my daughter Gianna who's 5 watches you guys as well. As soon as we get some extra cash would love to help by buying a shirt for me and the little guy and girl. Big time fan long time. Keep em coming guys. Roy LINY..
I see it turning into a rideable cooler or chair. Just the right size.
I think it is a good base to work from, extending the wheel base and widening it a bit will do a lot of wonders. Just putting bigger tires on it is just going to make it raise the front wheels a lot easier. It's way too short.
If the rear end was extended say 3 feet with the engine just in front of the rear tires that would make it a lot more stable at least in a straight line. With some slicks it could be an interesting drag 4 wheel bike sort of? It will steer a bit better than now but not great. Only way to really do that is to widen the track by another foot or so.
Amazing build. This is going to be fun!
Maybe try some lawn mower front tires. (15x6.5-6) those would definitely give you a wider tread to work with on each tire.
Love your videos guys! Keep up the great work
0:18 little does he know he will fall off of that quad LOL