FIXING BROKEN TIPS ON KNIVES

Поделиться
HTML-код
  • Опубликовано: 30 дек 2021
  • HOW TO FIX BROKEN TIPS ON KNIVES
    SPYDERCO YOJUMBO
    amzn.to/3JHrZQe
    SPYDERCO YOJIMBO 2
    amzn.to/3JxlyyX
    COLD STEEL VOYAGER XL
    amzn.to/32T8iE9
    SHARPENING SUPPLIES:
    WORK SHARP KEN ONION
    amzn.to/3qAZ7Ad
    work sharp Ken onion grinder attachment
    amzn.to/3EMoMLk
    Ruby stone 3k grit
    amzn.to/3EI24Fl
    ruby 4" stone
    amzn.to/3o0rMzf
    ruby Benchstone
    amzn.to/3zsQ5aX
    ULTRA SHARP 3 DIAMOND PLATES 2×6
    amzn.to/3cS0yoy
    Ultra sharp 3 diamond plates 3×8
    amzn.to/2ZL8Cjf
    Ultra sharp 2 diamond plates 3×8
    amzn.to/3cGpkrT
    ultra sharp 600 grt 3×8
    amzn.to/3pGq5nG
    ultra sharp medium and ultra fine 2×6
    amzn.to/3ut51V4
    Sharpening stone clamp
    amzn.to/3oSvAPB
    Ceramic Rod
    amzn.to/2MU5SwW
    DIAMOND ROD
    amzn.to/3rLaXYU
    Strop and compound
    amzn.to/3oTJu3W
    Strop and compound
    amzn.to/3rraCJg
    Diamond spray for stropping
    amzn.to/36NxGtV
    LANSKY COARSE DIAMOND STONE
    amzn.to/3i7LzZZ
    LANSKY MEDIUM DIAMOND STONE
    amzn.to/3zHZegp
    LANSKY FINE DIAMOND STONE
    amzn.to/3BRcfX0
    LANSKY FINE CERAMIC STONE
    amzn.to/3rB47oK
    venev stropping compound sample pack
    amzn.to/36ND6VN
    Smith tri stone
    amzn.to/3pSa3b3
    work sharp field sharpener
    amzn.to/3rKoW03
    Work sharp Benchstone
    amzn.to/3tFP7GO
    Tri stone
    amzn.to/2YOPQHy
    Jewelers loupe
    amzn.to/3pXsA5W
    KNIFE TOOLS:
    Wiha magnetic driver
    amzn.to/3aAavEB
    Wiha Bit selector
    amzn.to/39NTmIm5
    Wiha Bits
    amzn.to/3cXbotR
    Wiha torque set
    amzn.to/2YMp1Dw
    BOKER PLUS WIHA BITS AND DRIVER
    amzn.to/3pn1RSj
    Locktight stick
    amzn.to/39RLs0F
    KPL KNIFE PIVOT LUBE
    amzn.to/3aBHacL
    2 pack original & heavy KPL
    amzn.to/2MDF5VR
    Silicon Rings
    JERAD’S: amzn.to/2PppWGg
    KARA’S: amzn.to/2PrrS18r
    ***************
    ppl CONSIDER VISITNG OUR PATREON!
    Please keep in mind that we are still in the process of creating our patreon, the tiers may be adjusted as we continue to grow our page. Every tier will always be eligible for giveaways. We appreciate all of you for watching our content and supporting us!
    PATREON LINK: www.patreon.com/user?u=20902236
    To donate, contact or just have some good 'ol knife talk with the Neeve's DM us on Instagram @neevesknives
    LINK: neevesknives?ig...
    OR
    Contact us by email at jrneeve@gmail.com
    (Instagram is preferred)
    NeevesKnives Paypal
  • РазвлеченияРазвлечения

Комментарии • 159

  • @coobay4786
    @coobay4786 2 года назад +8

    I broke the tip on my L.T. Wright Patriot and sent it to them and asked if they could fix it by grinding it and I was OK with it being a little shorter. 2 weeks later I got a brand new Patriot in the mail at no charge. Now that's a company that takes care of their customers.

    • @whatitisMillertime
      @whatitisMillertime 10 месяцев назад +2

      It's Nice to hear an Outfit stand Firmly by their product. It seems as time goes on businesses don't care about their reputation like older generations.

  • @dennishurley1992
    @dennishurley1992 2 года назад +19

    I’ve used Scotchbrite pads to get a nice brushed finish. You could use that to even up the finish on that spine. I first learned about that when I owned a DeLorean, because that’s how they told you to get rid of little scratches. Get a pack with a range of coarseness.

    • @dennishurley1992
      @dennishurley1992 2 года назад +4

      I have also used Scotchbrite to put a satin finish on an entire blade. Then if you get a scratch you can just refinish it. Never use steel wool because the steel particles will cause rust on even the most stainless steels.

    • @Kungfufigher
      @Kungfufigher 2 года назад

      I use the same thing all the time. Also I use the very corner on my detent track to make smoother. And it’s hidden if you don’t want to brush the blade. With the exception of a few that are exposed when deployed.

    • @masonrains5010
      @masonrains5010 2 года назад +1

      Scotchbrite is awesome.

    • @andrebartels1690
      @andrebartels1690 2 года назад +1

      There are rotary scotchbrite bits for power drills. These give the nicest touch 👌

    • @brennenhudson7626
      @brennenhudson7626 2 года назад

      What kind of pads? The non scratch pads u use for dishes or the more expensive ones? I just Googled them. I have a second spyderco military that has a small spot where the grind is off. I was just curious.

  • @bdubb5390
    @bdubb5390 2 года назад +5

    I'm still rocking the spyderco sharp maker. It fixed a broken tip of mine. I'm sure it was much quicker with the grinder though. Great vid!!

  • @SkunkPunch73
    @SkunkPunch73 2 года назад +4

    Beautiful seeing you tinkering away my man, it still tickles me how many people have or own a Spyderco Yojimbo and don’t know it is designed and made specifically with knife fighting in mind, they just like the shape lol. Touch wood no one ever needs to go down that line in their lifetime. Much love one and all out there! 😉🥃🥃😘👍

  • @eastbaywalker5555
    @eastbaywalker5555 2 года назад +1

    Wishing you & Kara a happy, healthy, and prosperous 2022! Thanks for all your vids, reviews, and content (especially sharpening tips)!

  • @StevEDC_UK
    @StevEDC_UK 2 года назад +7

    Looks excellent bro,I'm needing the ken onion in my life but just can't afford to get one just yet and then spend more on attachments but yea so so handy,the opportunitys are endless

    • @user-cs3hi8zp7p
      @user-cs3hi8zp7p 2 года назад

      I'm right there with ya...I want one sumthin fierce!

  • @kenfaulkner5544
    @kenfaulkner5544 2 года назад +1

    Thanks for this video. I've been slowly trying to improve my sharpening/repairing game and this way very instructive.

  • @sethprice241
    @sethprice241 Год назад

    Thanks man! I just dropped my Kapara last night and blunted the tip. I could barely sleep!
    It looks just like factory again!
    Thanks again bro and take care.

  • @highcaliberhardwoods2261
    @highcaliberhardwoods2261 2 года назад +1

    This was awesome. Loved watching you work. I'm new to your channel and I must say, this was my favorite video to watch so far! They've all been excellent, but this was particularly helpful, informative and entertaining for me. Happy new year!

  • @mostmuscular619
    @mostmuscular619 2 года назад

    Nice job! Great explanation of the process and options to fix a broken tip.

  • @craighoward5486
    @craighoward5486 2 месяца назад

    Answer begins at about 6:45 into the vid. Aside from all that time to get to an answer, the answer is good. Very helpful.

  • @cueball981
    @cueball981 2 года назад +4

    Fantastic job, Jerad! How many people would just buy a new knife and not consider a simple repair option? I'm sure there are many out there, unfortunately. I'd love to get my hands on all them broken tipped knives, let me tell ya! 👊

    • @NeevesKnives
      @NeevesKnives  2 года назад +2

      Absolutely send them over here

  • @t_mac010
    @t_mac010 2 года назад

    Good stuff. I've had a lot fun doing repairs with a work sharp. Or a grinding wheel for some serious changes.

  • @bluerazors
    @bluerazors 2 года назад

    Super job! They look brand new. I have a 3hp Bader and I doubt they would have looked better. That grinder is paying for itself fast.

  • @whatitisMillertime
    @whatitisMillertime 10 месяцев назад

    Thank You Jarred
    I Appreciate your guidance on fixing my Pro Teck U.S.A. Godfather...
    Keep up the the Great infomative tutorials. 👍👍

  • @BrandonGavin_EDC
    @BrandonGavin_EDC 2 года назад

    Yo! Happy New Year Dr. J and Kara! I’ll be doing a cheers to ya here in a few hours! 🎇 🎉 🎈 🎆
    Amazing repair as well.

  • @johnharris1846
    @johnharris1846 2 года назад

    wow! nice work! thanks for this video. Happy New Year!

  • @ballpython57able
    @ballpython57able 2 года назад

    All I can say is to that you are awesome. These are exactly like a new one but better than original. Thank you sir.

  • @jakebennett239
    @jakebennett239 10 месяцев назад

    Very, very impressive workmanship!

  • @robertbudnik3318
    @robertbudnik3318 2 года назад

    Very interesting! You are an artist!

  • @mikemckenzy
    @mikemckenzy 2 года назад

    You’re a frikkin magician! Those look amazing. Tip doctor Neeves.

  • @qsens
    @qsens 2 года назад

    Impressive! Great job!

  • @robertdewalt8711
    @robertdewalt8711 2 года назад

    I have also fixed 3 knives with broken tips using my Ken Onion Blade grinding system. One of the reasons I got firm belt set (3 sets). On the back side of my blade grinding system I have leather stopping pads on straight backend on blade grinding system.

  • @russcagle6965
    @russcagle6965 2 года назад

    Good job, sir!! ✌️

  • @bunsonhoneydew9099
    @bunsonhoneydew9099 2 года назад

    Good video. Lots of classroom and reasoning. Did anybody else notice that little mechanical gizmo that has the word "EDGE GUIDE" on the side perfectly blocks the camera from seeing the blade contact the belt?

  • @carminedesanto6746
    @carminedesanto6746 2 года назад

    Bravo my good sir!👍

  • @rickywright7863
    @rickywright7863 3 месяца назад

    Looks great

  • @powerplay4real174
    @powerplay4real174 2 года назад

    Good job fixing those tips 🙂

  • @jjjustkill299
    @jjjustkill299 2 года назад

    Nice job!

  • @jamessethmoore
    @jamessethmoore 2 года назад +1

    Well done!

  • @jslaughterofthesoul4939
    @jslaughterofthesoul4939 2 года назад

    The Civilian specifically limited in its warrantee if used for anything but combat/defense, no general EDC applications allosed.
    Excellent video! Have you done much or reprofiling to improve or customize blade shapes or improve/customize?

  • @jt6648
    @jt6648 2 года назад

    Nice process
    Wish I got a workshop

  • @richardcampbell5762
    @richardcampbell5762 2 года назад

    Thanks for sharing bro.👍🇺🇲🤙🥃✌

  • @jeo1349
    @jeo1349 2 года назад

    Nice work Pimp....

  • @moore4615
    @moore4615 2 года назад

    Good job bro!

  • @andrewlasure7828
    @andrewlasure7828 2 года назад

    Great work 👍🏻

  • @r.m.cortez8178
    @r.m.cortez8178 2 года назад

    great video

  • @phillipteems6617
    @phillipteems6617 2 года назад

    LNIB 😆
    Excellent repair jobs!

  • @petersymons7817
    @petersymons7817 2 года назад

    Thank you

  • @GBall_Vision
    @GBall_Vision 2 года назад

    Awesome video Neeves 🔥🔥

  • @Kungfufigher
    @Kungfufigher 2 года назад

    Great job buddy

  • @richardf9137
    @richardf9137 2 года назад

    SWEET!

  • @user-cs3hi8zp7p
    @user-cs3hi8zp7p 2 года назад

    Great work bro👍👍

  • @Chillygilly88
    @Chillygilly88 4 месяца назад

    I bent the tip on my para 3. Just bought it and I’m in love with it but ruined it by dropping the thing. It’s the purple cruwear version. Any advice as to how I can get the top back to normal without reshaping the blade? I don’t wanna f it up. Thanks in advance

  • @ger13nunyah56
    @ger13nunyah56 2 года назад

    Bloody nice 😊

  • @jameslowe6253
    @jameslowe6253 2 года назад

    Hey brother! Fuck you have came along way and it couldn't of happened to better people! I'm an avid collector and boosting the community down under in the land of OZ! Happy new year Jared, hope the stars align for you and Kara in 2022! Keep firing brother! 💯🔥⚔

  • @turdferguson2874
    @turdferguson2874 5 месяцев назад

    Jared do you offer knife services for mebers of your patreon? I have a spyderco lil native in cruwear and a shaman in s30v that both have chipped up tips. I dont have the skills or the tools to fix them and I'm not sure where to take them to have the sharpened out.

  • @TimothyCibula-vh5ip
    @TimothyCibula-vh5ip 6 месяцев назад

    What grit is that blue belt? Very nice

  • @jorgefernandez6407
    @jorgefernandez6407 Год назад

    Jarred, you do "excellent" work! How would I get in touch with you too repair tips I've chipped?

  • @florindeaconu3169
    @florindeaconu3169 2 года назад

    Happy New Year man !

  • @unsivilized
    @unsivilized 2 года назад

    I need to search your videos to see how to make them open smoother... I see to many videos talking about how they will eventually break in, but my voyager is still stiff and your opens so easy lol

  • @Anythingelse83
    @Anythingelse83 Год назад

    Excellent video thanks, ever do this to a DLC blade?

    • @NeevesKnives
      @NeevesKnives  Год назад +1

      yes but you have to 2 tone it meaning you will see where you grind so you have to try and blend it as much as poss

    • @Anythingelse83
      @Anythingelse83 Год назад

      @@NeevesKnives thanks, recommendations on what to look into on how to 2 tone it? Thanks again, enjoying the videos.

    • @NeevesKnives
      @NeevesKnives  Год назад

      @@Anythingelse83 if you grind the spine you can add swedges on the spine to the tip

  • @jefferys9593
    @jefferys9593 2 года назад

    Nice work Jared, looks like they didn’t even have a damaged tip.

  • @nathanstewart7766
    @nathanstewart7766 2 года назад +1

    Good vid. I just chipped the edge off my pm3. I wanna drop down the spine but its black coated. Not sure what I'm going to do yet. Just got the thing, sucks!

    • @masonrains5010
      @masonrains5010 2 года назад

      Is it the tip? If so, you could MAYBE grind the cutting edge down 1/2 inch before the “tip chip” and shape it till the chip is gone. It would have a little more belly towards the tip. Not the best explanation, or the best idea. 😬

    • @nathanstewart7766
      @nathanstewart7766 2 года назад +1

      @@masonrains5010 ya it's the tip. Luckily I didn't break off too much. I'll probably just sharpen up the blade some to make it less noticable and use it as a daily carry. Thanks!

    • @tubeonline629
      @tubeonline629 2 года назад

      Be careful, or after grinding it may leave a point sticking above the handle when it's closed.

    • @NeevesKnives
      @NeevesKnives  2 года назад

      Yeah if it's coated you can take the material from the edge so not to damage the coating

  • @Rime0ne
    @Rime0ne 2 года назад +2

    Is that the blade grinder attachment? I don't have the the extra attachment and mine looks the same as urs. Also, what belt is that? Also, great job thanks for the tutorial. I've tried this method on much less severe rounded off tips. You're definitely much better at it!

    • @NeevesKnives
      @NeevesKnives  2 года назад

      Yes the blade grinder attachment for the Ken onion, u used their 60 grit then there 200

  • @d.eddlemon8400
    @d.eddlemon8400 2 года назад

    Nice job! Could you have turned the Voyager into a tanto or a reverse tanto? I was wondering what that would look like.

  • @95ZR580
    @95ZR580 2 года назад

    Nice work! You have a utx 85 with a broke tip? I want one thats been broke and repaired down to like 2.9" to be legal in my under 3" state law.

  • @SonoraSlinger
    @SonoraSlinger 2 года назад +1

    I have personally never repaired a broken tip any other way than removing material from the spine. Always makes the most sense.
    Unless your edge is chipped to hel then there is no reason to grind it down

    • @unclejoe6811
      @unclejoe6811 Год назад +1

      Reprofiling the cutting edge takes patience, time and a belt sander. It's usually not worth the time. I usually just do as shown here and reshape the spine the benefit is a spike shaped blade that looks meaner.

    • @SonoraSlinger
      @SonoraSlinger Год назад

      @@unclejoe6811 make em pokier unk 🗡️🗡️🗡️

  • @jukio02
    @jukio02 11 месяцев назад

    Would you say the Ken Onion is better than the original? Is it worth the extra cost?

  • @JohnC29
    @JohnC29 2 года назад +2

    I'd make the Voyager a clip point.

  • @jessep8767
    @jessep8767 2 года назад

    Would you be inclined to take a look at some photos of a chipped edge I have and see if you could help me out?

    • @NeevesKnives
      @NeevesKnives  2 года назад +1

      Absolutely send it to Instagram, just give me time I will message you back

  • @brennenhudson7626
    @brennenhudson7626 2 года назад

    Dude your hand sharpened edges look sexy. The way they cut. I have a pm2 with small tip chip and factory edge. What would u charge? I didn't know u help people with their knives. I just started watching your videos a while ago and I'm hooked. U been getting me back into knives. I kinda left from collecting and went to collecting guns. But I have always loved good knives. I'm love the blades steels.

  • @kevinbarrera8745
    @kevinbarrera8745 2 года назад

    What was the name of the knife you said competes with the lock of the voyager? Ive never seen that

    • @NeevesKnives
      @NeevesKnives  2 года назад

      The Demko AD20. Or other tri ad locks like the 4max. The ad10

  • @watcherspirit2351
    @watcherspirit2351 2 года назад

    My Cogent has a broken tip, very small. Dropped it in the bathroom sink. Fell only about a foot. Who'd have thought such a little drop would break the steel?? Who would you recommend I send it to for repairs? I do not have the equipment or skills. Thanks! Great video.

    • @NeevesKnives
      @NeevesKnives  2 года назад

      Contact me on email or through Instagram. Ceramic is extremely hard and steel doesn't compare especially with thin geometry

  • @stefanallgauer7276
    @stefanallgauer7276 2 года назад

    Top-Job! I Like it. ;0)) Grüßle

  • @airadaimagery692
    @airadaimagery692 2 года назад +2

    Question from an amateur, with the Voyager, could you have sharpened the broken tip, if you wanted to, and make it into like a dual grind knife? You know, like a dive knife, so that it could be better used for prying? Like I said, I just don’t know, that’s why I’m asking... Thanks

    • @masonrains5010
      @masonrains5010 2 года назад +2

      Yea… if you wanted to.

    • @Lemmiwinkser
      @Lemmiwinkser 2 года назад

      totally makes sense. I have a huge ass wharncliffe and if the tip ever breaks off I'm turning it into a tanto lol

    • @NeevesKnives
      @NeevesKnives  2 года назад +2

      Absolutely, you can pretty much change a blade into what ever you want as long as the stop pin areas don't get compromised

    • @airadaimagery692
      @airadaimagery692 2 года назад

      @@NeevesKnives 👍

  • @dominickgiallombardo2921
    @dominickgiallombardo2921 2 года назад

    What about Kubey Aus10 ? Is it the same as Cold Steels Aus10? Very interesting video.

    • @NeevesKnives
      @NeevesKnives  2 года назад

      It's not the exact same because they probably have a little different heat treat protocols but they are both done well

  • @newmanoutdoorsnewman5619
    @newmanoutdoorsnewman5619 2 года назад

    bang happy new year

  • @Ike32
    @Ike32 2 года назад +2

    Just the tip

  • @sir_i.p.freely3757
    @sir_i.p.freely3757 5 месяцев назад

    Damaged the tip on my CS Spartan I don’t got the cash to buy that fancy mini belt sander so I’m taking a little meat off the clip to bring back the tip by stone I know I’m in for a long project but it will be like brand new soon

  • @Zero_8347
    @Zero_8347 2 года назад

    Drop points and sheepsfoot/wharnies are easy to repair cuz you can just take material off the spine with a belt grinder

  • @MrChainsawAardvark
    @MrChainsawAardvark 2 года назад

    Hey, I'm trying to find a pantograph knife - would anyone here have an idea of where to get one, or recommendations of a brand?

    • @NeevesKnives
      @NeevesKnives  2 года назад +1

      You would probably have to find them on ebay, but you can look around at the knife dealers like blade hq, white mountain knives, knife center, smokey mountain knives m ight be your best bet

  • @latetodagame1892
    @latetodagame1892 2 года назад

    I'd just throw those away and move on!🤘🏼

  • @YourAverageReviews
    @YourAverageReviews 2 года назад +1

    I feel the Cold Steel could've been fixed from the edge side without taking that much steel off because you could just taper the edge. Sure, you'd change the edge shape a bit, but I feel it wouldn't be that bad. Either way good job.

    • @NeevesKnives
      @NeevesKnives  2 года назад

      Of course but this wasn't much steel in the end it looked brand new, and didn't require loosing g any steel from the edge which is most important and it didn't change the geometry or shape

  • @robertmunguia250
    @robertmunguia250 Год назад

    You recommend belt sanders to fix tips? Oh what grit is that belt?

    • @NeevesKnives
      @NeevesKnives  Год назад +1

      If your going to remove the steel from the spine, or have a lot of steel to remove before doing a Sharpening, my belt I think starts at 60 grit then finish at 300 if you want a finer satin finish

    • @robertmunguia250
      @robertmunguia250 Год назад

      @@NeevesKnives yes that’s what I started at on 60grit on 1 by 30 and then progressed to 400 grit trizact and diamond stone to finish. Not as good as I wanted but looks straightened.

    • @NeevesKnives
      @NeevesKnives  Год назад +1

      @@robertmunguia250 did you finish with sanding by hand that might help to blend it in

  • @OGBladeReviews
    @OGBladeReviews 2 года назад

    I think the Knife Junkie must have sent you these, has his specialty is breaking tips; or so he says.... 😂👍🗡️

    • @NeevesKnives
      @NeevesKnives  2 года назад

      😆 not this time but he Definitely has

  • @nico-max
    @nico-max 2 года назад +1

    Coldsteel , the strongest knives in the world 😆

  • @Seoulstic
    @Seoulstic 2 года назад

    I see people sending knives to you for repairs, is there any chance that you do simple mods ? Like a stone wash ?

    • @NeevesKnives
      @NeevesKnives  2 года назад +1

      I do but rt now I'm only doing other small things, I will continue doing stonewashing in future

  • @b.starknwo6564
    @b.starknwo6564 9 месяцев назад

    Sometimes I would get to the point bit quicker
    👍

  • @Boltsinkwell
    @Boltsinkwell Месяц назад

    Are we talking about how our knives perform and stand up to abuse or are we fixing a broken tip?!?!?!? I don't mean to come across as a dick but I've ruined my stone trying to fix a blade that is made of extremely hard steel. I was looking for advice on how to do it in a more efficient way that won't damage my sharpening stones. The first few minutes were all about how much you like your knife and all I wanted to know was how you were going to repair it. Lol. Anyways I decided to wait it out and I have to say you do nice work. Next time I'd title my video "How much I love my knife and how I fix it when it breaks.,"

  • @saraqdanut9300
    @saraqdanut9300 2 года назад

    To the spyderco i will give it a mini tanto tip.

  • @lionsjewelryedc1794
    @lionsjewelryedc1794 2 года назад

    Have to rework my kubey anteater that i broke the tip on

  • @mrpipps90
    @mrpipps90 2 года назад

    Been trying to fix my elementum with just stones...taking forever.

    • @NeevesKnives
      @NeevesKnives  2 года назад

      Start with a very coarse diamond plate

  • @johnmarchetti3815
    @johnmarchetti3815 Год назад

    You're fucking awesome dude 🙂

  • @unclejoe6811
    @unclejoe6811 Год назад

    Further proof that just sticking the tip in can cause problems

  • @iliraliko1510
    @iliraliko1510 Год назад

    I have been warned doing this will mess up heat treatment but idk.

    • @NeevesKnives
      @NeevesKnives  Год назад

      no it wont as long as the blade doesnt get to hot which mine doesnt i make sure of it, in many cases im dipping it in water, but when the belt is not at a super high speed and you stop often it wont burn

  • @osbaldohernandez9174
    @osbaldohernandez9174 2 года назад +1

    How much you charge

    • @5PercentTint
      @5PercentTint 2 года назад

      “If you have to ask, big man, you can’t afford it” - Barry Badrinath

    • @osbaldohernandez9174
      @osbaldohernandez9174 2 года назад

      @@5PercentTint what 😑

    • @5PercentTint
      @5PercentTint 2 года назад

      @@osbaldohernandez9174 quote from super troopers. Meant to be a joke…

    • @NeevesKnives
      @NeevesKnives  2 года назад

      Hernandez contact me on Instagram or through email they are usually linked in description. Usually it's 30$ for freehand I have other options as well
      neevesknives
      Jrneeve@gmail.com

  • @jamesomalley4556
    @jamesomalley4556 5 месяцев назад

    I rounded off a knife tip using a work sharp Lol.

    • @NeevesKnives
      @NeevesKnives  5 месяцев назад

      Yeah I show in many of my fixed angle Sharpening videos how not to do that as it will be a pain in ass

  • @jasonhensley3071
    @jasonhensley3071 2 года назад

    There's only one way to keep from breaking the tip of your knife. Don't prion shit with it just cut things like they're meant to be used for

    • @NeevesKnives
      @NeevesKnives  2 года назад

      Many are broke from being dropped

  • @JohnFrumFromAmerica
    @JohnFrumFromAmerica 2 года назад

    I just make a mini sheepsfoot

  • @edwardk6764
    @edwardk6764 2 года назад

    Hope that doesn't happen to my yojimbo 2 or yojumbo.

    • @NeevesKnives
      @NeevesKnives  2 года назад +1

      Well good luck! 😆 🤣 you have my contact info

  • @mymans3284
    @mymans3284 2 года назад

    Are you lugemonger by chance

  • @Flockingtheherd
    @Flockingtheherd 2 года назад

    And this is why I don’t use folding knives. Everybody’s so into this fad with folding knives and extremely hard steels that should never be used on a knife. And keep in mind no folding knife should ever, no matter what, be used for hard use. They are essentially only for cutting paper and cardboard nothing else

    • @_MiMo_
      @_MiMo_ 2 года назад +5

      Lynn Thompson and Andrew Demko disagree. And Chris Reeve and Bill Harsey and Ernest Emerson and....

    • @masonrains5010
      @masonrains5010 2 года назад +2

      @@_MiMo_ and me.

    • @NeevesKnives
      @NeevesKnives  2 года назад +1

      Yeah I disagree, I know some folders that are far far stronger and tougher than some fixed blades. There are some incredibly strong locks that have been thoroughly tested and proven to hold way more weight than you could ever deliver. There's knives for every purpose I agree many are for cutting normal purposes only.

    • @Flockingtheherd
      @Flockingtheherd 2 года назад

      @@NeevesKnives eh I still disagree. I mean sure there may be a few folders that are overbuilt and have a strong lock, like an extrema ratio RAO II or triad lock. But there’s one defining feature in a folding knife that compromises its strength and goes so easily unaccounted for when determining if a knife is safe for heavy duty use. And that is longitudinal forces. A knifes locking mechanism only defines a knifes latitudinal force, up and down, not side to side. A hard use knife encounters forces on any geometric plane. For example when trying to shave a stick, not only are you applying latitudinal force down, but longitudinal force to the blades side. This is what will ultimately lead a folding knife to fail as there is a space between the blade and the folders tang/handle near the pivot. It might work for awhile but it will only wear out and become looser and looser over time until failure. A good test to determine if a knife is capable of hard use is to baton a knife sideways into a tree and to then stand on the knife as a step. Many fixed blades can achieve this, but no folder will ever be able to do this reliably.

  • @DougHinVA
    @DougHinVA 5 месяцев назад

    Seeing his hands and hearing his fast-talking voice are NOT what viewers watch a video for. They want to see how to repair a damaged knife tip.

  • @chrisbyars4422
    @chrisbyars4422 3 месяца назад

    After 1:00 minute I still get a Cold Steel sales pitch. You didn’t get to the content. Waste of time watching this useless video

  • @wernersen61
    @wernersen61 2 года назад

    nearly ten minutes of blaablaaablaaa before starting the work...absolute boring

    • @NeevesKnives
      @NeevesKnives  2 года назад

      Sorry I wanted to cover all the questions I'd be asked in the comments before starting. Lucky there's a fast forward button

  • @robertkidnley93
    @robertkidnley93 Год назад

    Is there any online places I can send my knife in for repairs