How to Replace Door Lock Actuator 2002-2005 Ford Explorer
HTML-код
- Опубликовано: 25 авг 2024
- Buy Now!
New Door Lock Actuator from 1AAuto.com 1aau.to/ii/1ADL...
This video shows you how to install a new lock actuator in your 2002-2005 Ford Explorer. Power door lock systems typically use some sort of actuated motor to drive the lock mechanism. If the actuator breaks, then the door lock will no longer operate electronically.
This process should be similar on the following vehicles:
2002 Ford Explorer
2003 Ford Explorer
2004 Ford Explorer
2005 Ford Explorer
Tools you will need:
• Pocket Screwdriver
• 5.5mm Socket
• Trim Tool Set 1aau.to/oa/1AXX...
• T27 Torx Driver
• T27 Torx Socket
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Works as instructed on a 2004 Explorer. The video is spot on EXCEPT removing the door trim **WARNING** >>Remove the door handle trim piece BEFORE you remove the switch bezel. You WILL damage/break the handle trim piece and/or the switch bezel if you try to pry the switch pack first!! Door handle trim piece will come out by prying from the front side of the door towards yourself and then rocks out towards the rear. It is held by three metal retainers and two plastic tabs on the rear. Just pry slow and be careful! Other than that, video is excellent and the TRQ part worked like charm.
Thanks for the video! I ordered a Motorcraft (Ford) one, and the supplier (not related to your company) shipped one for the opposite side of the vehicle. Instead of waiting for a replacement, I opened up the housing on the broken part, and found the part that broke was the gear attached to the little electronic motor, so I opened the new one, and swapped the bad motor/gear from the old unit with the new motor/gear from the new one, put it all back together and it works great now!
Does this also control "key in" bell and the radio shutoff?
Love your work, sometimes the view was blocked by small access space so coupl 12:51