Nerf Vulcan 500 RPM Modification
HTML-код
- Опубликовано: 11 сен 2024
- Fun Nerf gun mod to raise the fire rate of the Vulcan to about 500 Rpm. All you need is some wire 2 RC battery packs and some time.
Firing comparison starts at 4:40 if you don't want to listen to how to do the mod
original video
• 500 Round Per Minute D...
![[REVIEW] NERF GRENADE!? LOLWUT!](http://i.ytimg.com/vi/9WVdy48L8ng/mqdefault.jpg)
did this mod on my Vulcan. My grandpa laughted at me. "My gun shot 1300 rounds a minute back in 1944".
ayyyyy lmao
'1300 rpm' doubt that, maybe 900rpm.
Captain Co James
MG43. Hitlersaw as the Americans told it back in 1944.
+Jack yup
KingCorny93 MG42* it fired at 1200 on average. It could be lowed to 900 or raised to 1500 depending on what the weight of the bolt was that was being used in the gun at the time... some times crew would carry several bolts of different weights for different applications
After increasing the firing rate the motor heats up after many shots. solution: fire in bursts and allow for cooldown....anyone else being reminded of actual gun physics the more you mod these toys?
I cut a small 40mm hole next to the motors and mounted a 40mm fan for cooling
@@logvoid1559 Thats the same idea I was thinking of, Use real gun logic.
Drill cooling holes in the sides where the motor is located.
Same with a real m2 browning
"Short bursts, so you harvest more meat per bullet!"
Hm yes actual turret mount.
Hooking the batteries in parallel does NOT cut the voltage in half, it would keep the voltage the same and double the amps.
thank you for having basic sense
I tried a car battery It didn't end well...
Yea
i tried about 15 bat pack trust me you wouldnt wanna try this(busted my motoR)
lol!
Your car battery contains 20 DC
but that's a 12 volts
I actually successfully hooked up a cooling fan I got from my old laptop up to my Vulcan now it doesn't burn up :)
where did you place the fan?
Sanded out a hole by the flywheels and fitted the fan in there a small battery box under the barrel
History!
Sir I fear your power
For the record, parallel Voltage sources don't cut the voltage in half, it would still be the 9.6V going to the motor; however, it can deliver a higher current when in parallel / will las longer than 1 battery pack.
yes, you will have half the total voltage of the batteries you are using. If i was unclear on that i apologize . I intended to express that if you hook two 9.6 volts up in parallel you will only get an output of 9.6 volts vs in series you will have 19.2 volts. I hope this help you or anyone else out who had doubts.
2 things that would help you,
1. Depending on the size of the motor you can get a cooling fan for it and attach to the out side of the body and just cut a hole in the body by the motor.
2. take the spacers in the batter pack out, it comes apart easily, and hook you batteries up to it, would make it a little better and I think a lot more fun during nerf wars
Lol....imma try this with car batteries.....he he he....1 day later... Sir how did this fire start? Its a long story...
Now that you spent six years enjoying life and improving on your literary skill, I have returned you to an old and embarrassing comment you posted. Does your bad format bring everlasting shame and dishonor?
@@minkere was this comment necessary for a 6 year old comment?
@@minkere agreed
FastFlight probably
Car batteries have only 12 volts though
The best way to not heat up your motor as much is to take it apart even more and hook up fans to where the motor would be. One fan on one side sucking in air and another fan on the other side to blow out air. Very good way to mod your nerf gun!
When I do this: I AM HEAVY WEAPONS GUY
And this is my weapon
It cost 40 dollars to fire this weapon for 12 seconds...
POOTIS
I AM HEAVY in a Russian accent
@@aa2748 it fires custom (not) tooled darts at 140 (estimated) rounds a minute
Sweet! Gonna try this with my Jolt
*sees brother's greasy finger marks on it* Oh my god, who touched Sasha? WHO TOUCHED MY GUN!?
Some people think they can outsmart me.
Maybe... Maybe.
Ignaxpro Gamer I have yet to meet one that can outsmart b u l l e t
POOTIS
I suppose in the modding process to remove built in air restriction, one could easily include a small fan to cool the motor down when the trigger is pressed? Allowing for larger belts.
4:40 Did he just say "fandered?"
yup
@@sachplaysminecraft yeeeeeeessss
Some dude will probably do 5 of those batteries to equal the mg-42's rpm
holy crap, that Vulcan is firing like it was one of the arm cannons of ED-209 (from Robocop).
No in parallel you would still have 9.6v but you would double the capacity and amperage that can be delivered. In series voltage is added together but current remains the same as 1 pack. To the people who think a 9v battery like you find in your smoke detector would be good they deliver 150mA at best a d battery can do 500mA rechargeable nimh and lithium batteries do about 1500mA and lithium batteries like you use for helicopters can do 10,000mA-50,000mA. When your gun jams and the motors stop the current they draw jumps up typically around 10,000mA.
Also voltage = rpm and amperage= torque with dc motors.
what if some crazy guy tries to wire a car battery to it?
Your average car battery puts out about 12.6 volts when fully charged.
*****
Not very quickly, though.
It would be funny.
Junn Kopf its like less talk and more shooty
LOL
car batteries actually only run around 12 volts, they just have high durability and rarely explode from being over-charged. I'm sure if you really searched around you could find a 24 volt battery for like a boat or a camper but those are around 2 or 3 times the size of a car battery and are quite expensive. Just connect a third battery pack and you get 28.8 volts from around the same size and weight as the original tray with lightweight batteries
Ran mine on 48v, went FAST. The motor wasn't too happy. It DID feed if you held the belt at an equal or higher level than the gun. >600 rpm was pretty cool.
Wow.. limp weenie. Those bullets only reached about 6 feet. Wtf?
these are sweet mods bro
I’m not going to be surprised when it blows up
@Coyo1233 a car battery is 12 volts. the vulcan can take 24 volts provided you upgrade the motor or provide cooling airflow to the stock motor.
Wiring in parallel will not cut the voltage in half, it will double the battery life. you'll still have 9.6v, but both batteries will only be working half as hard, and therefore last twice as long. I used this principle with my minty boost. instead of two AA batteries in series, I used two sets of two batteries in parallel. double charging life, still 5.5 volts to my phone.
You need to mod this to remove the air flow restrictors and you'll have a crazy chain gun that shoots fast AND far.
it would be so badass to modify the gun so the motors have a quick detach system so you can carry an extra motor and when the other one heats up swap it and switch
Clearly the next step is to devise some sort of cooling system for the gun to overcome the heat issue.
@lllBOLTlll The motor will fry or not work at all and due to the plastic gears you wont be able to pull the chain. If you try it tell me how it goes. =)
I think he meant half of the total voltage from both batteries. Essentially hooking them in parallel won't decrease voltage but it won't get you any more voltage either
@hello26580 You mean 19.2v. Both the batteries are 9.6 volts. I dont know much about electronics but id say you are right about this setup burning up the motor.
Depends on the voltage, but my guess is that it will last a long time.
Can you use two 9.6 volt Rc batteries and will the vulcan be fine
"She weighs one hundred fifty kilograms and fires two hundred dollar, custom-tooled cartridges at ten thousand rounds per minute. It costs four hundred thousand dollars to fire this weapon, for twelve seconds."
actually firing the gun starts at 5:11 - Your Welcome
i was looking for this
it will fire at the same rate. Just make sure to charge the battery because it will loose charge faster than 6 D batteries
@PowderMonkeyMan911 A car battery is only 12 volts, which is less than the two smaller batteries he used. So basically a car battery would be bulkier and not work as well.
For making it absolutely plum crazy rate of fire, use a 6 cell lipo 22.2v battery. Those are designed for some of the most powerful rc cars, some capable of going past 100mph (160kph) so it should make the rate of fire on a vulcan even higher.
cooldude20115 This will instantly fry the motor, it would be cool if it could do that but the motor cant handle it.
A Crazy Spider i know it would, so installing a higher-voltage rated motor would fix that problem.
Yes, running the motor for too long like that will melt the motor winding insulation, and it would be impossible to repair without finding a new motor. I'd be curious to see how long that gun could last shooting at that rate, but its probably not worth the headache to test it.
hooking them up in parallel doubles the voltage, hooking them up in series doubles the capacity
Doesn't need to. This gun is for suppression fire. You use weapon this in conjunction with others. I'd recommend the Nerf Vortex.
A normal car batterie has about 12 V; The 2 RC batteriepacks are having about 19 V. To improve the power again you have to use 2 Car batteries or a stronger one with 24 V. If you want to improwe the rate of fire extreme, just plug it into a socket and let your enemies feel the power of 230 V.
Nice, Imma buy 4 of these and now women will have to pry my virginity from my cold dead hands lol
That's the spirit lmao
@KhReKK09 No they are not the highest you can get they are one of the most commonly available. if you plan on doing that you might want to not do this mod because it becomes hard for the gun to pull the chain if it is not held or in the normal holder box. you could give it a shot but i would recommend not going the full 18 volts try 12 or so first. It should still shoot fast but you might have trouble pulling the chain is all.
Instead of using those clips, you should go to a hobby shop or even online, and get the male counterpart to the clips on the batteries and do a little soldering, so they wont come loose, but easy to disconnect for charging.
@Coyo1233 Im sorry but you are wrong sir. First of all a car battery is not huge on voltage unless you are talking bout a battery for an electric car thats a different story. Car batteries are essentially the same as an other battery with the same voltage they just last allot longer. And this will not melt your gun unless your run it constantly for more than a couple of minutes. If you knew how an electric motor works you would understand what i am saying. Feel free to look it up.
R.I.P. motors
put a fan on it if you put a 50 dart chain
no, it combines both batterys amperage but splits the voltage.
Wow those are dangerous batterys. Every overcharged one?
It shoots flames.
the military fires in bursts to keep their barrels cool and to increase weapon life. if you wanted 800 rpm+, well you would have to upgrade the whole gun. and I mean the whole gun.
Could always find a higher volt motor of the same physical size and a higher torque rating. That'd solve the over heating problem, either that, another way would be to change the gearing, or to mount heatsinks on the motor and whatever else needs it, a long with cutting vents into the body, and if absolutly nessisary putting fans on it
I’m a really big fan of the Vulcan it’s good in a nerf war when your trying to do a dday thing you have this gun to make sure no one wishes they were born :)
If you put a small fan inside with heat vents in the shell a 100 dart chain barely heats it up.
use rc heli batterys they are lighter and power on longer with constant use they will also improve rc boats as they are designed to power rather drainging electric motors and if you really wanted you could simply buy a heli motor and install it in your Vulcan.
Won't speed it up as much as the two rc batter packs he used. Car batteries operate at 12 volts. The extra voltage is what speeds up the motor, not amps.
Honestly, if you want high RPM, just go out and get a Rapid Fire 20 from Toys R Us. Gets insane RoF and decent ranges.
I have never seen a vulcan with a solid grey grip before!
It wouldn't be any "cooler". Car batteries are usually only 12V. He's using more than 12V here. The only thing a car battery would buy you (besides weight) is a longer lasting battery.
*goes out and buys a Prometheus*
Wins
Yes we live in 2019
and why is the FBI here? learning new things too look out for?
A Car battery is usually 12V which would actually not make the gun shoot as fast.
@PowderMonkeyMan911 you could, but it's only a 50% voltage increase, unlike these batteries, which more than double the voltage.
When your crush says she hates nerf:
It's nerf or nothin'
I miss old nerf guns.
You're putting just over twice the intended voltage into that thing! Isn't there a risk of outright frying the motors?
Not if you drill cooling holes near the motor like on a real machine gun.
It will blow off excess heat and for good measure add a fan if you want.
@DunkingDino No it will not shoot father but if you want you can remove the air restrictors in the chain to do so
When you mod a nerf gun its fun for all ages. its also allot cheaper then airsoft n you dont have to keep buying darts unless you want to.
I'll ask my cousin if I can have his old dirtbike engine...
Nice! I was looking for someone to show me how to hook rc batteries properly. Thanks!!!!
if you wont speed just get a ajustible adapter set to 24 volts and cut the wire at the end and conect it positive w/ positive and negative w/ negative on gun
you dont understand you have`nt modified the vulcan you just linked it up with a few baattery packs
My friend: Modded weapons are allowed
Me:
You can if you mimic some Homer Simpson-type loser who decides that doubling the voltage across a DC motor is actually a really cool idea that outsmarts the manufacturer and makes his toy gun shoot faster at the same time.
Everyone else just points and laughs.
i like elite nerf guns and my cousin has a lot of nerf guns and we playing nerf wars when i met him and some other friends of our neighboorhood soo i love nerf guns and i like your modifasion i will tell it to him ,when i see him,thnks and great video eugin.
I know an idea.
To fix the heating of the internals issue use real machine gun logic:
Drill holes to allow for heat to blow out of the sides of the shell.
The stampede has a safety system built into it so that when the the trigger is pulled the bolt of the blaster will cycle completely to avoid jams and keep the blaster operation well. The problem is when you hook up batteries to a stampede if the voltage is to high the motor will start and run but the momentum of the bolt keeps moving when it should stop then due to the safety it will keep cycling. There is no fix for this other than a lover voltage. If you find a fix great, i don't know one
Holy smokes the history lesson! Old RUclips needs more curation!
I wonder if replacing the motor, and modifying some of the plastic bits with metal bits instead would give you both speed and reliability. If anyone has a link to that being done, i'd like to know.
Dont be so judging. So what he likes playing with nerf guns, he must enjoy it. Just because other people choose airsoft or paintball or real firearms in my case does not make them any less of a person than us who choose other.
Well, i think is simple...
1) go buy yourself some motors
2) install them and connect them to the power supply of your choice
3) (optional) Cooling fan(s)!
4) fire
5) tell me if i should try it too :p
HOLY CRAP THIS GUY WILL TURN ALL NERF GUNS INTO REAL GUNS LOL
Nice editing at the end.
@GeneralMcNeil: Unless if you're in a range of 1 ~ 10 FT to the enemy.
In you're in that range, you can choose between fully auto or bursts. (it's recommended auto in case of diagonal moving enemies or multiple enemies.
reccomendation for any who do this mod, follow the same rules for an actual light machine gun or any automatic. SHORT CONTROLLED BURSTS!
@PowderMonkeyMan911 I think you think that a car battery is more powerful than they actually are.
do a 11.1 lipo
That's a really neat trick, but... the darts don't seem to be going that far. I remember the ones I had as a kid seemed to have a lot more range, I mean they're nerf guns, it's not like more power is going to turn them into deadly weapons.
clips? kinda impractical in a fight.Use 14500 li-on batterys 3 or 4 and your gun will be much more reliable.also use aa to d adapters for a nice clean look.
@TheBloodEagle27 Ya you should be fine, as long as you give the motor some time to cool down you should be fine 10 seconds should be fine i would just caution you if you do fire multiple chains in a row just be sure to give it a solid break every 5-6 chains.
Drill holes near the motor so that it has a way to blow off the excess heat like on a real machine gun.
Grrman soldier shooting mg42 ( colorized )
Ever thought about adding a cooling fan or nitro-pack to cool the motor
Well actually voltage in series divides and in parallel remains the same.
Why don't you just solder the connectors with lead and put a Tamiya or Deans connector?
If you use more than 9.6 volt batteries your gun will melt. DO NOT be stupid and hook it up to a car battery. Your whole gun will melt, no doubt about it. Remember, 9.6 volts is the max amount of volts if you want to keep your Nerf gun without melting it.
So no other mods, just alligator clip and rc batteries
The one thing that I have noticed is that the Vulcan seems to feed then fire in two separate actions is this true?
1:21 now the vulcan normal works on... nine balls!
@PowderMonkeyMan911 or three?
Why is everybody criticizing this is epic! Does it work for the Stampede as well?
have you ever tried to put 6 RC batteries? if not you should.